Used Equipment Construction Equipment For Sale In Tulsa

Used pull behind pecan picker with a gas motor. It is in very good condition. It would be great it you had only a few trees to pick. It can be pulled behind a small tractor, lawn mower, atv, 4-wheeler, etc.

It can be pulled with a small tractor, lawn mower, atv, etc. This is a pull behind picker. IT was used for 2 years and has been garage kept since. It is in very good condition. This is a pecan picker with a gas motor.

3 point implements included are a brush hog, box blade, grader blade and a dirt bucket. Starts first time and runs very strong. Recently overhauled. A canopy is also included. Ford Jubilee Tractor with many implements included.

• Three-piece Stick Extension for excavators (no cables) rental price: $950/mo • Three-piece Stick Extension for excavators with cables & pipe hooks rental price: $1,550/mo • Sale price upon request.

Came off D6T LGP s/n KJL00988 Winch Located at Tusla OK.

ESCO 36" wide Bucket, with side cutters, 5 teeth, lifting eye, Has pins, fits Volvo EC140 Excavator.

Hammer maintenance and rebuild at factory in 2016, not used since. Hammer and leads are like new. Hammer and leads currently in Tulsa Oklahoma Leads are 8"x27" u style leads and are like new.

623F SCRAPER FLOOR, REBUILT, LIKE NEW.

D6D Welder Tractor w/(4) DC-400 welders, compressor and lead boom Quincy 390 compressor, A/C outlets Tack Rig

Fully serviced and ready for work. 3-section directional control valve w/open center spring return, Hyd. Tank under fuel tank for operator comfort. Hydraulic boom stop. Hyd counterweight with Cat cwt interchangeability.

561C Hydraulic Pipelayer S/N 62A00335, 40,000 lbs Capacity, Recent Conversion, Hydraulic counterweights, New Seat and Operator Compartment, Hydraulic Boom Kick-Out, 20" Pads

Cat D8K with Challenger CP583K Hydraulic Pipelayer, 20' boom, 28" pads Tail winch, Complete service, New radiator.

Reconfigured March 2010. CAT D7G Welder Tractor w/4 - Lincoln DC-400 welders Caterpillar D7G WELDER TRACTOR equipped with (4) Lincoln DC-400 Welders, Quincy 390 Compressor, Lead boom and outlets.

Hydraulic boom stop. D7G Equipped with NEW (2009) Challenger Services Pipelayer Attachment, Standard 24' Boom, 30" Pads, M30 2 speed planetary load line winch with free fall, M30 single speed planetary boom winch, Hi volume hyd pump, cwt interchange w/Cat.

Counterweights Caterpillar 561 Pipelayer, S/N 62A00096 Recent Hydraulic Conversion, 2-speed load winch 20 Foot Boom, 18" Pads, Hydraulic Counterweights. Cat 561C Pipelayer 62A00096, Hydraulic Conversion, 2 speed load winch, Hyd.

Challenger Tack Rig CAT D6D Welder Tractor w/ (4) LINCOLN DC-400 welders, Quincy 390 Compressor, Lead boom and A/C outlets.

Challenger CP561N Hydraulic Pipelayer Attachment on D5N LGP, 40,000 lbs.

Cwt Caterpillar 561D Pipelayer S/N 54X00513 Two speed load winch,20 foot boom, 18" pads Hydraulic counterweights 561D Hydraluic Pipelayer, Two speed load winch, 20' boom, 18" pads, hyd.

Pipelayer (2009) 24' Boom, 30" pads, MOUNTED on Cat D7G LGP S/N 72W00540 Challenger CP572G Hydraulic Pipelayer (NEW pipelayer-on D7G LGP), 90,000 lb.capacity, 30" pads Challenger CP572G Hydraulic Pipelayer equipped with CP572G LGP, 90,000 lbs lift capacity,...

D7G w/ NEW Challenger Services CP572G Pipelayer Attachment,90,000 lb.cap. Equipped with New (2009) Challenger Services CP572G 90,000 Lbs. Pipelayer Attachment, Standard 24' Boom 30" Pads, M30 2spd planetary load line winch w/free fall, M30 single speed...

D6N XL COMBO Hydraulic Pipelayer D6N XL Hydraulic Pipelayer S/N AKM00602 Tractor: 2004 Model / Attachment: 2007 Model, 25 Ton Capacity, 6 Way Blade, Hours: 3636, 24" Pads

4-Sets shock mounts for each welder. 4-115 volt electrical outlets. 1-Newage 100kW105 degree rise Alternator producing 125kVA@1800 rpm/60hz/230/460 volts. 1-low frequency automatic shut-off protection 1-Quincy 350 air compressor (electric drive) with...

Pads, 20' boom, 20 ton capacity 1999 Model with 3645 hrs 110 hp Hydraulic winches Free fall on load winch 20" pads 20' boom Caterpillar 561M Challenger Pipelayer equipped with hydraulic counterweights, 20?

1-Front bumper with hydraulic lead boom for welding leads 2.5t@ 3.5 meters. 1-Low frequency automatic shut-off protection 1-Quincy 390 air compressor (electric drive) with 36 cfm/235 psi max and 120 gal air tank.

561N Hydraulic Pipelayer S/N TAD00135, 2008 Model, 20 Ton Capacity, Hours: 500, 30" Pads, Hydraulic Counterweights

CAT 561N Hydraulic Pipelayer S/N TAD00139, 2008 Model, 20 Ton Capacity, Hours: 345, 30" Pads Hydraulic counterweights