Used Equipment Construction Attachments For Sale In Buffalo

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Cab Overall Condition Rating (1-10, 1= Worst, 10=Best): 7 Weight for Shipping: 2,000 lbs. Other (Tag Info, etc.): The certification tag is attached in the upper RH, rear corner of this cab.

No cracks or repairs have been found.. Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long Description: All of the pin holes on this boom appear to be in decent shape. Weight: 6,200 lbs.

Weight:5,000 lbs. All of the pin holes on this boom are in good condition and no cracks have been found. Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long No warping appears to be present.

Weight:5,000 lbs. Description: All of the pin holes on this stick are in good condtition. Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long The rest of the boom looks good.

The bushing for the pin hole where the bucket pins to the stick looks like it may have some wear. All of the other pin holes look good. Weight: 2100 lbs. There are no cracks or repairs present on this stick.

Weight: 1,100 lbs. Description: The working length of this stick is 9 feet, 2 inches or 2.8 meters. Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long This stick has a thumb mount welded to the bottom of it.

No cracks have been found. Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long Description: All of the pin holes and all of the pin boss surfaces look good on this boom.

Stick Information

HAS A/C WHICH IS NOT WORKING. ALL WIPER ARMS MISSING. VINYL SEAT HAS A FEW TEARS IN IT. LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. CONTROL LINKAGE HAS SOME WEAR.

Weight: 1,500 lbs. Description: The working length of this stick is 9 feet, 7 1/2 inches long or 2.94 meters. Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long This stick has a thumb mount welded to it.

Weight: 2500 lbs. Description: The pin holes for the bellcrank pin, have a little wear and the boss surfaces around the holes having some "scoring" in them. Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long

Cracks/Damage: There is a crack in the blade face, just off to the left from the center of it. The condition of the tilt cylinder is not known. The moldboard has been refaced with a series of seven plates that run the width of the blade and hard-facing...

Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found. Weight: 1,800 lbs.

GEARAMATIC WITH DRIVE SHAFTS.

Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long Description: All of the pin holes on this boom are in good shape and no cracks have been found. Weight: 1,500 lbs.

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

No cracks or repairs have been found. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long Description: All of the pin holes on this boom appear to be in good shape.

This stick is missing both outer bushings for the bucket pin. Dimensions for shipping: 2 feet High, 4 feet Wide, 15 feet Long. All of the pin holes appear to be in good shape. (Outer bushing part number: 61EN-13320).

All pin holes appear to be in good shape.and no cracks can be seen. Mid-section to jib section cylinder-The working condition of this cylinder is also unknown, although the rod is rusted as can be seen in the photos.

RECEIVED CAB GLASS NEW... NOT INSTALLED ...

All of the pinholes appear to be in decent condition. There two cracks on this stick (see photos) near where the stick cylinder pins to it. Weight: 1,600 lbs. This stick has whats left of a thumb mount, welded to it.

Dimensions for shipping: 7 1/2 feet High, 3 1/2 feet Wide, 24 feet Long 6.6 METER Weight: 9,000 lbs.

Weight: 3,000 lbs. Description: The working length of this stick is 11 feet, 4 inches. Dimensions for shipping: 1 1/2 feet High, 4 feet high, 15 1/2 feet Long This stick has had a thumb mount cutt off it and because of this ,it has a few light torch marks...

Dimensions for shipping: 5 feet High, 3 feet Wide, 21 feet Long Description: All of the pin holes appear to be in good shape and no cracks have been found. Weight: 4,500 lbs.