Used Equipment Cab And Chassis Trucks For Sale In Lloydminster

C/w Custom combo vac unit, 820 hibon blower, steamer, 13 m3 tank, 407/412 spec, VIPK 02/14, 11,367 engine hours, 2209.9 blower hours.

C/w 11m3 fresh water tank, T&E 4" transfer pump.

All certifications are current and up to date. Flushby unit, 47 ft mast, slant compatible, 3x5 Gardner Denver triplex pump, 5000 psi, 2005 Advance 8m3 tank, TC 406 code, Pullmaster HL-25 working winch, Pullmaster PL-5 cat line winch, Maxi lift folding...

TRUCK--- Single steer, Tandem axle

50" flat top bunk. 10,000 lbs, hydraulic drive draw works, c/w all swabbing tools and hand tools. C/w Single mast 30 ft.

2005 Peterbilt*

C/w Gardner denver 3x5 triplex pump, Hyraulic drive load pump, Hutchinson aluminum tank , TC 406 code, last inspected sept./2014, no hoses or fittings, Alberta safety inspection current.

10,000 lb mast, right angle drive draw works, built by Big Sky Steel Fabricators, c/w all tools. C/w swab unit, single 30 ft.

C/w Hamm's three compartment tank, 406 ms crude spec, 11 million btu diesel fired heater/hot oiler, tool boxes,

C/w Celtic pride 72 ft telescoping mast, 50,000 lb rating, 48,000 lb Celtic pride injector, rod board, 2014 Fassi Model M30A picker, 2013 Maxistad picker, Fassi Model MA30A picker, rod tongs, rod handling tools, over shots, misc.

12000 lb front axle, 4 lb rear axle, 3.73 carrier ratio, 22.5 aluminum rear discs, 24.5 aluminum front discs, 221" wheelbase, Holland fifth wheel, Single chrome exhaust, Aluminum fuel tank, 70" midrise sleeper, Burgundy exterior, Grey interior.

20/2014, Rod board, draw works c/w line, sand line drum and sandline, This rig was completely rebuilt in 2005 , and is very good condition. 100,000 lbs Max Static hook load , 4 lines, free standing s/n 7397, current level four inspection,Franks 42-10...

2013 Challenger WR 9740 with 5200 36' draper header

C/w Gardner Denver 4x5 triplex pump, 5,000 psi, Hutchinson Industries 11m3 aluminum Tank, TC-406 spec, hydraulic load pump, load hose, pressure hoses, fittings, Alum front Roo Bumper.

C/w 2006 Advance 100 bbl tank, Pto driven 4" pump, hoses, 3406 cat 455 engine, eaton 18 speed trans, 16,000 front, 46,000 rears, 11r24.5 tires all around on alum, 75% tread left, Chalmers suspension, State DOT, A/C Condition: Good, Differential Lock,...

Still like NEW!!! 712 engine hours. Gen-Tech built pressure truck, 3x5 gardner denver triplex pump, 11m3 Hamms tank, hydraulic drive load pump.

C/w S S Rig & Equipment flushby unit, model 54-50, s/n 13-0124, 54 ft. 8m3 , one compartment tank, TC-406 code, s/n 11161, Pullmaster HL-25 working winch, Pullmaster PL-5 catline winch, Fassi model M30A.13 crane, s/n 0304-2099, rod board capable of holding...

2010 MF Hesston 9435 w/36' Header swather / windrower, Head: Grain Head, Conditioner: None,

2011 Hesston 9435 Swather w/5230- 30' Header, Head: Grain Head, Conditioner: None,

Mast,Salnt compatable, Pull master HL25 and PL5 winch, Gardner Denver 3x5 triplex pump, 1997Advance 10 m3 tank,c/w new PVIK 06/14 , weight indicator, hydraulic drive load pump, ROO bumper,hand tools, rod handling tools.

A/C, Differential Lock, State DOT, 8x2, Headache Rack, Overhaul, Turbo, Wet Kit C/w working deck, Maxilft crane, rear mounted, tool boxes, pindle hitch, Alberta Safety good til Sept./2018.

Mast slant compatible, 50,000 Lbs rating, 3x5 gardner denver triplex pump, namco drop box, Wabash 60 bbl TC306 spec tank,HL25 pullmaster working winch, PL5 pullmaster catline winch, Trico rod hook, 25 ton, 25 ton travelling blocks, new level IV inspection,...

Only hauled water, 4 top hatches, T&E Load pump, shaft driven, s/n 2AESTHB047S000142, rear spray bar, hoses, tool boxes, pindle hitch, ready to go to work. C/w 2007 Advance 16 m3 tank, TC406-crude spec, no tank cert.