Used Equipment Asphalt Pavers Concrete Equipment For Sale In North Carolina

Cold tack distributor 115 gallon or 210 gallon capacity or 10 gallon portable sprayer available. Portable 10 gallon pumping system does NOT include tank. 115 gallon only comes in a skid mount.

Pavement crack router, 30 hp Kohler gas engine, carbide tipped router blades (1 set) mounted on the machine to rout 1/2" width, dual element air cleaning system with pre-cleaner, other sizes also available.

Walk behind infrared heater, 3 ft x 3 ft, 360,00 BTU propane heat, heats up very quickly, Also available by order only- 10 inch x 8 ft paver mount heater or 10 inch x 4 ft walk behind that is great for repairing joints.

Portable power sprayer 10 gallon size also available. Honda gas engine, 10 GPM pumping system, spray wand with 100 ft hose. We would have to order from factory. These PAS sprayers are Not a stock item for our yard.

Call for details. These units are not a stock item for our yard. Hot mix asphalt transporter 4000 lb or 8000 lb (2 ton or 4 ton) capacity, fully insulated hopper, material temperature thermometer, single 300,000 BTU vapor propane burner with flame-out...

Other options availabe but not limited to hose reel, 10" filler lid, operator's platform, auto temp control, hand wand material re-circulation plumbing, asohalt rate meter, additional spray wand & more! 115 gallon unit only comes in skid mount.

Rubberized melting kettle/crack sealer 145 gallon, 250 gallon and 400 gallon crack sealers available, diesel engines and diesel heat, or gas engines and propane heat, oil jacketed material vat, patented oil heated hose system makes crack sealing very...

Optional hand agitation available for 300 gallon unit w/2 blade agitation. Other optional equipment such as spray bar, water tank, flashing arrow stick traffic advisor, strobe light and more!! These sealcoat machines are Not a stock item on our yard.

A/C / Hot tack melter used for dispensing tack coatings or asphalt cement 115 gallon, 170 gallon, 260 gallon, 350 gallon or 500 gallon capacity available, under-fired semi a/c / hot tack melter with optional submerged power spray system, operating temperature...

Also available full 12 ft circulating spray bar. Optional non-circulating spray bar 8 ft or can add extensions to that. We would have to order from factory. And MORE! These units are Not a stock item for our yard.

New tack distributor 10GPM pump, Honda 5.5 hp gas engine, 250 gallon capacity, 5 ft spray wand with 40 ft hose, 10" filler lid, hose reel, electric brakes, trailer mounted, propane heat, flushing tank.

This unit is Not a stock item for our yard. We would have to order from factory. Random concrete router 27 hp Kohler gas engine, dual element air cleaning system with pre-cleaner, water attachment.

NEW walk behind crack sealer. 10 gallon capacity, hand agitation, leak free trigger controlled dispensing valve, 80,000 BTU propane torch w/hose & regulator, steel rear wheels, steel front caster wheel, temperature thermometer, hinged lid.

10 gallon capacity, full wrap around oil jacket, manual full sweep agitation, single 80,000 BTU vapor burner with flame out protection, oil temperature gauge, material temperature gauge, front caster wheel, two rubber tread rear wheels, heated 1" discharge...

A variety of engine options, horsepower and handle configurations provide versatility to meet individual preferences and job site conditions. Blade pitch up to 30° for better concrete burnishing.

Variable speeds: Low speeds for floating, high speeds for burnishing. Blade pitch up to 30° for better concrete burnishing. Patented dynamically balanced trowels (when blades are turning) offer nearly effortless operation and maximum control at all speeds...

A variety of engine options, horsepower and handle configurations provide versatility to meet individual preferences and job site conditions. Blade pitch up to 30° for better concrete burnishing.

Variable speeds: Low speeds for floating, high speeds for burnishing. Blade pitch up to 30° for better concrete burnishing. Patented dynamically balanced trowels (when blades are turning) offer nearly effortless operation and maximum control at all speeds...

A variety of engine options, horsepower and handle configurations provide versatility to meet individual preferences and job site conditions. Blade pitch up to 30° for better concrete burnishing.

Hydrostatic drive; Isuzu diesel engine; 7.5 tns hopper cap; Hydraulic screed; 8'-13' width; 60% Screed; Manual crown adjustment; Conveyors & Augers Good Condition; Automatics Work Except the Auger Sensor need to be replaced; Only other need is for the...

NEW! Wacker Neuson CRT 48 with Power Steering Ride-On Trowel. Electro hydraulic control concept offers true power steering Very precise operation, Virtually fatigue-free operation possible, Choice of two control modes, Ideal for large pours where the...

Dimensions L x W x H Shipping 130.5 x 67.5 x 65 in. L x W x H Operating 127 x 65 x 57 in Weight Shipping weight 2,985 lb Operating weight 2,480 lb Blades and finishing data Troweling diameter 59 in Quantity of blades 12 Blades (Combination) 23 x 8 in...

1996 CMI TR6004/450B 2 Lane 25 ft Autograde w/ loading Conveyor! 1996 CMI TR6004/450B 2 Lane 25 ft Autograde , Cat Diesel, Hydramation grade automation. Simple unit to use. Decent machine, Just not using it Has very low hours, has performed well over...

Truck has 192,293 miles. This is a one-owner sealcoating machine that is only a few years old. Neal 550 Gallon sealcoating machine that is 550 gallon, Honda Engine with spray wand, Pump replaced This machine comes mounted on a 1996 Chevrolet 3500HD flatbed...

10' Screed with Hydraulic Extentions, 173hp Deere Dsl., 31,000 LBS, Track Paver.

1448 Power Box 8' wide extends out to 12', runs and operates good

Screed, new extensions, runs good Buyer to confirm year