Used Equipment Air Seeders Air Carts For Sale In Pleasant Valley

Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. 160219, black transflow hose, and 90 degree elbow. Use with a standard automotive-type filter. With dusty conditions there is only one way to guarantee that pulsators get the clean...

Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. 160218, black transflow hose, 90 degree elbow and one pulsator cover no.160222. Use with a standard automotive-type filter.

Our low-cost, quick-mount Fresh Air Filter is attached directly to 3” PVC pipe and can handle six pulsators. Features green plastic body with replaceable foam filter.

Claw window tool is inserted into a nipple on the claw, guided to the window then turned to push the window out. For bottom-unloading claws.

Inflation Removal Tool also easily removes air tubes from forks. Inflations are sometimes hard to remove from the claw nipples. Stainless steel.

Molded with extra strength reinforcement at both ends, specially formulated air tubes last longer and give better service. 1/4" ID x 9" long for Bou-Matic and DeLaval

9"x 9/32" ID Air Tube for DeLaval

Stainless Steel Twin Air Fork for alternating pulsation, front to rear, 9/32" ID.

Molded with extra strength reinforcement at both ends, specially formulated air tubes last longer and give better service. 9/32" ID x 9" long for DeLaval

100% welded Stainless Steel chain is used for various models of detachers.

Clear Transflow tm Air Tubes, 9/32" I.D. X 9 for DeLaval. Packed 100 in a box.

Stainless Steel Twin Air Fork for alternating pulsation, front to rear,9/32" ID (for use with #183605 Top Unloading Claw)

Molded with extra strength reinforcement at both ends, specially formulated air tubes last longer and give better service. 3/16" ID x 8" long for Surge

Molded with extra strength reinforcement at both ends, specially formulated air tubes last longer and give better service. 1/4" ID x 6-1/2" long for Universal & Choreboy

Stainless Steel Twin Air Fork for alternating pulsation, side to side, 1/4" ID.

Tubes are 5/16" (8mm) ID by 9" long. Reinforced spiral threads at both ends of this deluxe blue rubber air tube means increased flexibility and strength. Sold individually.

Twin Stainless Steel Air Fork, front to rear, works with Surge claws. 3/8" OD for alternating pulsation.

Molded with extra strength reinforcement at both ends, specially formulated air tubes last longer and give better service. 1/4" ID x 7-1/2" long for Bou-Matic, Westfalia & Perfection

Tubes are 5/8" (8mm) ID by 8" long. Reinforced spiral threads at both ends of this deluxe blue rubber air tube means increased flexibility and strength. Sold individually.

Single Stainless Steel Air Fork for single pulsation 1/4" ID.

Simply attach one tube to each claw nipple with a small piece of Transflow tubing to accomodate the extra width. Featuring all Stainless Steel construction with smooth finish, SS Cluster Extenders are for use with any claw when milking widely uddered...

Stainless Steel Air Fork for single pulsation, 1/4" ID.

Stainless Steel Twin Air Fork for alternating pulsation, front to rear, 1/4" ID.

Molded with extra strength reinforcement at both ends, specially formulated air tubes last longer and give better service. 9/32" ID x 7-1/2" long for DeLaval and NuPulse

Plastic Twin Air Fork for alternating pulsation, front to rear, 1/4" ID.

Intake orifice is 1-1/2". Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

JD Rate Controller