Used Equipment Aggregate Mining Equipment For Sale In North East

2 Deck,Hyd Pump,Low Hour,Mounted on shop built adjustable portable stand,Nice Clean Unit, Pulleys can run from either side,

Once we finish the build the machine will be $150,000 Diesel Powered Portable Impact Crusher Universal Impactor mounted on Tri Axle Chassis, Detroit Diesel powers impact rotor and Generator, Generator powers discharge conveyor and vibrating feeder, All...

SUPERIOR 5' X 10' DEWATERING SCREEN AS PER BELOW: UNIT SPECIFICATIONS: - SIZE 5' X 10' - CONSTRUCTION RIGID WELDED FRAME CONSTRUCTED OF 1/2" A36 STEEL - SUPPORT FRAME PORTABLE CHASSIS WITH UNDER SCREEN COLLECTING FLUME WITH DISCHARGE FLANGE AND INTEGRAL...

Max discharge height line fraction 7’5” Dimensions ? Feeding width 5’6” ? Max discharge height coarse fraction 8’0” ? Dependent on material up to 220 Diesel generator 59.5 Material Feeding ?

EAGLE 36" X 18' SINGLE COARSE MATERIAL SCREW EQUIPPED WITH: - DRIVE ASSEMBLY WITH 30 HP MOTOR - WASHER SUPPORTS - DISCHARGE CHUTE - TRASH REMOVER - 6 SETS OF PADDLES VS STD 4 SETS - SKID MOUNTED - ELECTRICAL SWITCHGEAR PANEL WITH 100' OF POWER CORD -...

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

IT IS THE RESPONSIBILITY OF THE END USER TO HAVE THEM CHECKED BY A LOCAL INSPECTOR - 75' OF POWER CORD WITH CORD GRIPS WITH 20 AMP HUBBELL PLUG - STAND AES 36" X 20' CHANNEL FRAME SAND REJECT CONVEYOR EQUIPPED AS: - FLAT ROLLERS, DESIGNED TO SLIDE IN...

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

SUPERIOR 30" X 70' PORTABLE RADIAL STACKING CONVEYOR, EQUIPPED WITH: CONVEYOR FRAME: - MAIN FRAME: 24" DEEP TRUSS - CHORD ANGLES: 3" X 3" X 1/4" - LATTICE MEMBERS: 1 1/2" X 1 1/2" X 3/16" DRIVE SPECIFICATIONS: - DRIVE: CLASS I HEAD END -GEAR REDUCER:...

KOLBERG 47-3670 ROLL-AWAY STACKABLE 3-PACK CONVEYORS, EQUIPPED WITH: - FRAME - 30" DEEP HEAVY DUTY LATTICE TYPE FRAME DESIGNED WITH RECESSED RECEIVING TROUGH; TROUGHING AND RETURN IDLERS TO ALLOW FOR STACKING ONE ON ANOTHER FOR EASEOF TRANSPORTATION -...

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

RIM AND TIRE - PINTLY TYPE HITCH - 3 PLY 3/16" X 1/16" 330 PIW BELTING - VULCANIZED BELT SPLICE - SUPERIOR CEMA C TROUGHING AND RETURN ROLLERS - SUPERIOR 14" LAGGED HEAD PULLEY - SUPERIOR 12" WINGED TAIL PULLEY - GUARDING FOR DRIVE AND TAIL PULLEYS, V-BELT...

SUPERIOR 30" X 70' PORTABLE RADIAL STACKING CONVEYOR, EQUIPPED WITH: CONVEYOR FRAME: - MAIN FRAME: 24" DEEP TRUSS - CHORD ANGLES: 3" X 3" X 1/4" - LATTICE MEMBERS: 1 1/2" X 1 1/2" X 3/16" DRIVE SPECIFICATIONS: - DRIVE: CLASS I HEAD END - GEAR REDUCER:...

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

SUPERIOR 42" X 70' PORTABLE RADIAL STACKING CONVEYOR, EQUIPPED WITH: CONVEYOR FRAME: - MAIN FRAME: 30" DEEP TRUSS - CHORD ANGLES: 3" X 3" X 1/4" - LATTICE MEMBERS: 1 1/2" X 1 1/2" X 3/16" - EXTRA CHORD ANGLE: NOT INCLUDED DRIVE SPECIFICATIONS: - DRIVE:...

IT IS THE RESPONSIBILITY OF THE END USER TO HAVE THEM CHECKED BY A LOCAL INSPECTOR - ELECTRICAL SWITCHGEAR WITH 250' POWER CORD SUPERIOR 36" X 80' PORTABLE RADIAL STACKING CONVEYOR, EQUIPPED WITH: - 30" DEEP TRUSS MAIN FRAME - CLASS I HEAD END DRIVE -...

2013 Vibroscreen SCM-27 Box Screener.

More are always welcome to our family. I am the owner of the company my name is Christopher Wilson. I want good looking beast of a workhorse to build my construction company. We are trying forcast use the infomation at hand predict how we'll grow and...

White & red 1994 international mobile home moving toter truck in great condition 6 way hitch new clutch call 1994 international toter truck for mobilr home moving. This has 6way hiych grate truck for more info call

Truck is in good shape and ready for over the road hauling, has been maintained well, new front tires, has detachable Peterbilt sleeper and airfoil for cab Combination with 35 ton hydraulic detachable gooseneck trailer with capabilites to add 3rd axle...

Rhino Liner, Four Door, Automatic, Power Doors and Windows, 4WD on the Fly, Diesel, Leather Interior, Overdrive, ABS, Electric Trailer Brakes, Gooseneck, Straight pull, Custom Wheels, Newer Tires, Mud Flaps, Recent Brakes, Heated Seats, Back Up Sensor,...

Ready to go to work. Price has been reduced to 20,000 1994 international toter truck , with 6 way hitch, 9 speed, percision built. Price has been reduced to 20,000 for more detailed info.

1995 F-250 SuperCab, Longbed, XLT, V8 7.5 liter engine, automatic, 2-wheel drive, 139,000 miles, air conditioning, power- steering, windows, doors, tilt wheel, cruise control, AM/FM cassette, sliding rear window, bed liner, dual fuel tanks, towing package,...

In good working condition. Both hold 20 frames. Pics available. 1 Stainless Steel, 1 galvanized honey extractor. We also have a table mounted uncapping knife if your interested. 2 great working extractors, we upgraded to a 40 frame and these are taking...

84" Low Profile Bucket