A myraid of uses, from tying off safety anchors to racking equipment "bandolier" style! Made from military-spec webbing. Safety load rated at 1,200 lb. Assorted colors.1" x 24
Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure around a tree trunk creating a secure point for a rigging block etc. For best results, a cow hitch is typically used to secure in place.
The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back buckle and comes with a quick gate connector for attachment to the ascension device.
Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
SLH12 is rope and snaps only; no prusik. Add your favorite carabiner to the eye to complete the safety lanyard! A 2-in-1 safety lanyard utilizing 12ft Hy Vee 16-strand line which consists of tightly-plied polyester surrounding polyolefin cores, reducing...
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
Never pull the Big Shot pouch below the trigger position. The Notch Big Shot Trigger dramatically improves your launching accuracy and consistency with the Big Shot Launcher. This attachment also reduces arm fatigue caused by repetitive use.
Product Features
Product Benefits
Fits all round 1-1/4-inch utility-grade fiberglass poles: Product Features
Reduces arm fatigue: Product Benefits
Integrated safety latch: Product Features
Use with your Notch Big Shot Launcher: Product Features
Improves launch accuracy and consistency: Product Benefits
Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is more evenly distributed for improved performance.
Ring can clip to saddle to keep saw close to your side when not using. Choose 12-inch long strap with a 2 1/2 in. The snap allows the user to keep the saw attached during use, even at arm's length.
Type: 16-inch overall length lanyard with snap
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
For added safety, a formed rope retention bar has been added. Accepts up to 3/4" rope. Lbf., 2,000 WLL.. Rated to 18,000 lb. Stronger, more durable construction. Used correctly this can prevent the limb from coming in contact with a house or power line.
This makes the flipline completely adjustable. Fliplines utilizing steel cores provide additional protection from accidental contact with chainsaws! Fliplines are made of 1/4 inch galvanized cable wrapped with a 12 strand polyester braided cover.
Carabiner shown on sliding prusik not included with 11CV or 12CV. The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
Two safety snaps on either end for easy lock-in or out! A tough, flexible safety strap made of Nybuck - A filament nylon woven into neoprene-impregnated cloth. 5'8" length, 5,000 lb test.
Specs
Made of filament nylon woven into neoprene-impregnated cloth: Specs
Shot-filled weights; Cordura with 7/8-inch nickel-plated rings. If every tree were the same, one weight would do the job. Our weights have a tighter, more aerodynamic design than competition for higher throws with more accuracy and ease of flight through...
Slick shot - designed for accurate throwing! Complete with 14oz cordura nylon throw bag, 150' of 1/8" braided polyethylene snag resistant line, and a durable nylon storage bag.
Specs
Throw bag made of 14oz cordura nylon: Specs
150ft of 1/8in braided polyethylene snag resistant line: Specs
Fully adjustable from 2"to 10'. Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach around the tree for that friction knot. Unique rope grab with 90 twist eliminates need for swivel or twisted clevis.
Product Features
Fully adjustable from 2" to 10': Specs
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
Red core alerts you of excess wear: Product Features
Aluminum sheave and bushing. Blocks are commonly used for lowering heavy loads tied under area to be cut with eye sling. Acts as a false crotch using rigging lines and friction device to lower cut material.
Specs
Minimum breaking strength 40,000 lbs.: Specs
Takes 3/4" rope.: Specs
Aluminum sheave and bushing.: Specs
Sheave (pulley wheel) is 1.125" wide x 3.455" high.: Specs
HPE26 is eye-to-eye. Prusik devices are common for 2 in 1 safety lanyards and also as friction hitches for climbing lines, only when an added wrap or other proper hitch is used. Snap version (HP26) features Buckingham's Steel Safety Snaps.
Specs
26" x 12 mm: Specs
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
A myriad of uses, but commonly used for one handed advance of friction hitches along the climbing line! Tensile: 7,000 lb WLL: 700 lb Sheave: Alum. Sheave Dia: 1-1/4"Side Plate: Alum.
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied! Pressing the Grillon lever will release the line even under load, for quick positioning.
Product Features
Reinforced eyes on each end for carabiners (carabiners are not included): Product Features
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied. Pressing the Grillon lever will release line even under load, for quick positioning: Product Features
Ship wt: 2 lbs.
The rope is lightweight, flexible, abrasion resistant nylon and includes a protective sleeve for reduced contact to abrasive surfaces: Product Features
Connects to the side or waist attachment points of a harness with carabiners (sold separately): Product Features
A complete guide to successful tree felling and wood cutting methods! Loaded with practical information that is essential to the safety and success of any tree-felling and wood cutting operation.
It has an aluminum wheel with a bushing axle (2-1/2 inch thread dia.) and stainless steel side plates. 28,000 lb tensile, 2,800 lb working load. 5/8 inch max rope dia. It acts as a false crotch using rigging lines and a friction device to lower cut material.
A safety snap on either end with thimble on spliced end for freedom of movement! Heavy duty 1/2 inch Walthane coated, double braid polyester rope. Adjustable from 3 to 6 feet. 5,000 tensile strength.
One application lasts up to 12 months! Fertilize and forget it! One application will feed those trees up to 12 months! High quality, slow release micronutrient supplements in easy to use spikes! Spikes contain sulphur which aids in the uptake of all macro-...
Specs
Quantity: 10 Spikes
Availabel in boxes of 10 spikes or 40 spikes: Specs
Ship Wt: 3.5 lb
Place one spike for every 1 inch of trunk diameter in a circle around the tree dripline: Specs
