Allows you to launch nearly straight up which is nearly impossible to do by hand. Includes Big Shot head and 2- 4ft extension poles. Pick up a Big Shot Trigger and improve accuracy and reduce arm fatigue!
Specs
Product Features
Ship wt: 9 lb
Two (2) Jameson 4-foot Fiberglass Poles: Specs
Launches throw-weights nearly 200 feet: Product Features
One (1) FP400B Leonard 4-foot Orange Fiberglass Base Pole: Specs
Works with 3 oz to 20 oz throw weights: Product Features
Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure around a tree trunk creating a secure point for a rigging block etc. For best results, a cow hitch is typically used to secure in place.
Braided and twisted rope provides a secure system. The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
5/8 inch max rope dia. Blocks are commonly used for lowering heavy loads These are often attached under the area to be cut with an eye sling. 28,000 lb tensile, 2,800 lb working load.
This knot tying kit includes one PRO-KNOT Rope Knot Card, two hanks of high quality static line cord and a practice caribiner. This will allow you to practice those knots you need to know! Six cards are attached together in corner with a brass grommet.
Climbing line diameter must be equal or greater than the Blue Streak (12mm). HPE26 is eye-to-eye. Both models are 26-inch. Snap version (HP26) features Buckingham's Steel Safety Snaps.
A myriad of uses, but commonly used for one handed advance of friction hitches along the climbing line! Tensile: 7,000 lb WLL: 700 lb Sheave: Alum. Sheave Dia: 1-1/4"Side Plate: Alum.
Lightweight all aluminum construction! Petzl fixed-sided pulley - The ideal component of all pulley hauling systems, the Fixe pulley can easily be coupled with a rope clamp / grab to give an anti-return function.
For even more efficient use, a micro pulley can be secured below the hitch, allowing one hand tending. Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure...
Use with rope diameters 8 to 13 mm. The Petzl Ascentree double handled ascender allows for a comfortable double rope climb! The improved dual-density material provides a wide bottom support surface and an excellent rubberized grip.
Specs
Toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes): Product Features
Provides temporary anchorage to overhead support beam for fall protection systems! 1 3/4" webbing cross-arm strap features a D-ring which slips through a web loop. Rated to 310 lb, tensilestrength 5,000 lb.
Specs
Provides temporary anchorage to overhead support beam for fall protection systems: Product Features
A second eye allows the user to attach a block and tackle, using an ascender and your rigging line, and hoist up a limb. Used correctly this can prevent the limb from coming in contact with a house or power line.
The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back buckle and comes with a quick gate connector for attachment to the ascension device.
Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Red core alerts you of excess wear. Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach around the tree for that friction knot.
Product Features
Fully adjustable from 2" to 10': Specs
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
Red core alerts you of excess wear: Product Features
This construction keeps a firm, round shape that provides an extra measure of safety. Smoothest cover runs well through cammed devices; tightest cover in the industry. XTC Fire was specifically designed for the demanding needs of the professional arborist.
Popular Steel Tree Climber Set with 3 & 1/2" permanent gaff! Contoured shank accommodates the ankle bone and the offset stirrup sits in the center of the foot. Complete with nylon leg straps and foot straps for added durability.
3 & 1/2" fixed gaff (spike): Specs
The long gaff is good for thick-bark trees: Product Features
A wide gate opening and high tensile strength! Kong manufactures this carabiner using high-quality carbon steel. Kong designed their extra-large carabiners with a wide gate opening and a high tensile strength.
Product Features
Specs
Open gate load (kN): 20: Specs
D-shape prevents rotation and distributes load along major axis: Product Features
Keylock system prevents snagging: Product Features
It is durable with excellent abrasion and UV resistance. A firm polyester double braided rope with high strength, low stretch and excellent resistance to wear! Added coating provides additional abrasion resistance.
Made of 16 strand 1/2" rope whipped eye splice to provide maximum safety! Whipped end and eye insure for a secure split tail. Eliminates the need to cut pieces from the end of the climbing line.
