For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried it, you may never go back to a traditional action sleeve. The high inward sleeve strength aids in security, while the large gate opening provides for quick attachment.
400 lb strength, 1.75 mm. Recommended for use with 10 oz throw bag. Achieve higher throws with lighter weights, greater control due to low stretch, and ability to pull down "hangers" due to its high strength.
Specs
Extremely high strength, low stretch, and excellent abrasion resistance in a small diameter, light-weight throwing line: Specs
Zing-it line is available in 1.75 mm or 2.2 mm thickness: Specs
5/8 inch max rope dia. And weighs 2.3 lbs. It acts as a false crotch using rigging lines and a friction device to lower cut material. It has an aluminum wheel with a bushing axle (2-1/2 inch thread dia.) and stainless steel side plates.
This will allow you to practice those knots you need to know! Six cards are attached together in corner with a brass grommet. 20 essential knots cover most any rope tying situation: Bowline, Square Knot, Water Knot, Rolling Hitch, Sheet Bend (Doubled...
90 degree twist in the adjuster aligns a carabiner perfectly to your saddle. No need for a twisted clevis or swivel. An easily adjustable rope lanyard with stiff handling characteristics of of a wire core flipline, without the steel cable! This 7/16"uniline...
Includes the Buckadjuster one-way cam: Product Features
SLH12 is rope and snaps only; no prusik. Cover yarns treated to enhance abrasion resistance. The 12CV is combined with Tenex eye-to-eye tail for prusik or other friction hitch use.
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
1 and 3/4 inch ring for saw suspension on saddle when not in use and 1 and 1/8 inch ring for saddle attachment. Not to be used with chainsaws over 15 lbs. Of force is applied! Buckingham's tear away bungee chain saw lanyard holds a chain saw if dropped...
Specs
Measures 32 inches when relaxed: Specs
6 inch nylon loop with twist half hitch to saw handle (Hi-Vis Yellow): Specs
1 and 3/4 inch ring for saw suspension on saddle when not in use: Specs
1 and 1/8 inch ring used to attach the lanyard to your saddle: Specs
Here Treeman shares his experience as a tree-climbing teacher and his knowledge of trees to show how you, too, can get high in the treetops using doubled-rope technique. Contains detailed chapters about: Tree selection and risk assessment General rules...
Carabiner shown on sliding prusik not included with 11CV or 12CV. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
The upper bushing will accommodate slings up th 3/4" in diameter. Convenient knurled knobs allow for easy rigging of the upper bushing. Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength...
40,000 lb tensile, 4,000 lb working load. Stainless steel sideplates and axle. Aluminum sheave and bushing. Acts as a false crotch using rigging lines and friction device to lower cut material.
Specs
Sheave (pulley wheel) is 1.125" wide x 3.455" high.: Specs
Adjustable from 3 to 6 feet. 5,000 tensile strength. A safety snap on either end with thimble on spliced end for freedom of movement! Heavy duty 1/2 inch Walthane coated, double braid polyester rope.
A height adjustable elastic keeps the foot in the loop, regardless of shoe type.. Ship Wt. .5 lb. The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with...
Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Use with rope diameters 8 to 13 mm. This ascender makes a great companion to the Pantin foot ascenders or can be used with the old-fashioned "footlock". Aluminum frame with chrome plated steel cams.
Product Features
Upper holes through which a carabiner attaches the device to the rope (useful for back-up belays or hauling): Product Features
Weighs 1 lb: Specs
Lower holes for connecting a lanyard: Product Features
For best results, a cow hitch is typically used to secure in place. Note: Knots and bending used to secure the sling will reduce workload limit. Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure...
The wide lower hole allows the carabiners lanyard and/or footloop to be easily attached. Upper hole for clipping a carabiner around the rope. The wide opening allows the handle to be easily grasped, even with gloves.
Product Features
Product Benefits
Wide lower hole allows the carabiners of the "progress: lanyard and or footloop to be easily attached: Product Features
Type: Right Handle
Aluminum and chrome-plated steel contruction: Specs
Wide opening allows the handle to be easily grasped, even with gloves: Product Features
Better grip on wet ropes is safer: Product Benefits
Less hand fatigue when ascending ropes: Product Benefits
Prusik devices are common for 2 in 1 safety lanyards and also as friction hitches for climbing lines, only when an added wrap or other proper hitch is used. Both models are 26-inch.
Specs
26" x 12 mm: Specs
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
Sheave Dia: 1-1/4"Side Plate: Alum. Rope Dia: 1/2"Weight: 2.4 oz A myriad of uses, but commonly used for one handed advance of friction hitches along the climbing line! Tensile: 7,000 lb WLL: 700 lb Sheave: Alum.
Dual colors of black and orange adds visibility in motion! Our weights have a tighter, more aerodynamic design than competition for higher throws with more accuracy and ease of flight through limbs and branches.
Specs
Weight: 8 oz
High visibility blank and orange adds visibility in motion: Specs
Cordura with 7/8-inch nickel-plated rings.: Specs
Bottom loop weights allow quick attachment of carabiners/throw line: Specs
Safety load rated at 1,200 lb. Assorted colors.1" x 24 A myraid of uses, from tying off safety anchors to racking equipment "bandolier" style! Made from military-spec webbing.
For even more efficient use, a micro pulley can be secured below the hitch, allowing one hand tending. Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure...
Fully adjustable from 2"to 10'. Unique rope grab with 90 twist eliminates need for swivel or twisted clevis. Red core alerts you of excess wear. Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach...
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
The red "wear indicator" tells you when it is time to replace it (not repair, replace): Product Benefits
Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle. The minimum breaking strength is 3,800 lbs. Aluminum pulley for arborist use! Uses a 1/2 inch rope.
