This duffel bag is spacious AND durable! Whether you take it out into the field, or just use it for storing those "have to have on hand" products, this arborist tote bag gets an A+! Spacious, durable, and easy to carry, the ATB will be number one in your...
For even more efficient use, a micro pulley can be secured below the hitch, allowing one hand tending. Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure...
The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back buckle and comes with a quick gate connector for attachment to the ascension device.
Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Gate Opening .99". The high inward sleeve strength aids in security, while the large gate opening provides for quick attachment. Major Axis Break Strength 26KN (5845lb). Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried...
Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
Lightweight all aluminum construction! Petzl fixed-sided pulley - The ideal component of all pulley hauling systems, the Fixe pulley can easily be coupled with a rope clamp / grab to give an anti-return function.
28,000 lb tensile, 2,800 lb working load. And weighs 2.3 lbs. It has an aluminum wheel with a bushing axle (2-1/2 inch thread dia.) and stainless steel side plates. Blocks are commonly used for lowering heavy loads These are often attached under the area...
Aluminum pulley for arborist use! Uses a 1/2 inch rope. Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle. The minimum breaking strength is 3,800 lbs.
Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure around a tree trunk creating a secure point for a rigging block etc. For best results, a cow hitch is typically used to secure in place.
This knot tying kit includes one PRO-KNOT Rope Knot Card, two hanks of high quality static line cord and a practice caribiner. This will allow you to practice those knots you need to know! Six cards are attached together in corner with a brass grommet.
For anyone who wants to climb - for work or for fun - its easy if you have good training! Your teacher is Peter "Treeman" Jenkins, the father of recreational tree climbing and an ISA-certified arborist and former production climber.
Product Features
Tree climbing ethics: Product Features
Tree selection and risk assessment: Product Features
Pick up a Big Shot Trigger and improve accuracy and reduce arm fatigue! Includes Big Shot head and 2- 4ft extension poles. Allows you to launch nearly straight up which is nearly impossible to do by hand.
Product Features
Ship wt: 9 lb
Description: Includes head and two Leonard 4 ft poles
Works with 3 oz to 20 oz throw weights: Product Features
Two (2) Jameson 4-foot Fiberglass Poles: Specs
Launches throw-weights nearly 200 feet: Product Features
Measures up to 50 inches fully extended, when relaxed measures 32 inches. Not to be used with chainsaws over 15 lbs. Hi-Vis yellow with a 6 inch nylon loop and twist half hitch. Constructed with a tear away safety pack that activates when 200 lbs.
Specs
1 and 3/4 inch ring for saw suspension on saddle when not in use: Specs
Measures up to 50 inches fully extended to provide ample reach when cutting: Specs
1 and 1/8 inch ring used to attach the lanyard to your saddle: Specs
6 inch nylon loop with twist half hitch to saw handle (Hi-Vis Yellow): Specs
The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. Carabiner shown on sliding prusik not included with 11CV or 12CV.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
Safe working load of 2,250 lb. Combine with the Buck Port-A-Wrap III for the ultimate lowering system. Complete with 50' of 1/2" braided BLUESTREAK rope. Prevents blocks from twisting.
Both models are 26-inch. HPE26 is eye-to-eye. Climbing line diameter must be equal or greater than the Blue Streak (12mm). Snap version (HP26) features Buckingham's Steel Safety Snaps.
Type: 26-inch Blue Streak Prusik, Steel Snap
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
The cotton webbing is reinforced with nylon providing comfort and strength. 1" neoprene leg straps keep the seat strap in place during use. Thick Cotton Saddle with Four D-rings for more stability.
Specs
Waist Size: 30-34 inches (20-inch Dee to Dee)
Four D-rings, cotton webbing reinforced with nylon: Specs
Suspension system features a medium Dee-ring and six connection loops. Classic master saddle that features a step-in waist belt and two side-mounted friction buckles and individual leg straps with interlock buckles.
Commercial strength rubber supports promote root development and installs in just minutes! Tree Saver stakes are good for root development because the straps are flexible allowing the tree to slightly sway naturally.
Full 1/2" size diameter for easier grip. Average tensile strength: Unspliced : 8100 lb. Wt 7.7 lb per 100 ft. Low stretch, with excellent knot-heat resistance. Work load 650 lb. Spliced : 6500 lb.
Specs
High visibility in trees, helps identify which rope is yours: Specs
Ground gripper anchors are strong, versatile, and easy to use! Anchor almost anything, with ready-made, instant holding power. Retrievable and reusable. Priced per anchor.
Blaze is an innovative, lightweight 11mm spliceable double-braided rope that boasts a smooth 24-strand braided cover. 11mm (0.5in) diameter. Works very well with mechanical ascension devices.
Expansion inserts rest around the limb to broaden the support. The "growth loop" allows for tree growth without girdling and can be inspected from the ground. Anti-friction sleeves eliminate abrasion and shock absorbers allow for free movement, reducing...
