The handle openings are large allowing easy use, even with gloved hands. Use with rope diameters 8 to 13 mm. The Petzl Ascentree double handled ascender allows for a comfortable double rope climb! The improved dual-density material provides a wide bottom...
Product Features
Lower holes for connecting a lanyard: Product Features
For ropes between 5/16" to 1/2": Specs
Upper holes through which a carabiner attaches the device to the rope (useful for back-up belays or hauling): Product Features
Braided and twisted rope provides a secure system. The combination of braided rope and twisted rope offers the best combination for this application. Different color thimbles to easily distinguish each end of the lanyard.
Specs
Blue Streak 16-strand rope looped around a 3-strand twist nylon rope: Specs
Different color thimbles to easily distinguish each end of the lanyard: Specs
SLH12 is rope and snaps only; no prusik. Add your favorite carabiner to the eye to complete the safety lanyard! A 2-in-1 safety lanyard utilizing 12ft Hy Vee 16-strand line which consists of tightly-plied polyester surrounding polyolefin cores, reducing...
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
Snap version (HP26) features Buckingham's Steel Safety Snaps. HPE26 is eye-to-eye. Both models are 26-inch. Climbing line diameter must be equal or greater than the Blue Streak (12mm).
Fully adjustable from 2"to 10'. Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach around the tree for that friction knot. Unique rope grab with 90 twist eliminates need for swivel or twisted clevis.
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
The red "wear indicator" tells you when it is time to replace it (not repair, replace): Product Benefits
Lightweight all aluminum construction! Petzl fixed-sided pulley - The ideal component of all pulley hauling systems, the Fixe pulley can easily be coupled with a rope clamp / grab to give an anti-return function.
Note: Knots and bending used to secure the sling will reduce workload limit. For best results, a cow hitch is typically used to secure in place. Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure...
40,000 lb tensile, 4,000 lb working load. Aluminum sheave and bushing. Aluminum wheel, 3" tread depth, 3/4" max rope diameter. Acts as a false crotch using rigging lines and friction device to lower cut material.
Specs
Aluminum sheave and bushing.: Specs
Takes 3/4" rope.: Specs
Sheave (pulley wheel) is 1.125" wide x 3.455" high.: Specs
Wide webbing across back reinforces the light back pad for increased back support. 3 accessory loops, ring and snap. The Glide Lite saddle emphasizes safety and versatility, all in a light weight 3.6 lb package.
Choose 12-inch long strap with a 2 1/2 in. Bright orange color. Or choose the 48-inch long 2-in-1 snap. Ring or 12-inch long strap with a 4 in. Ring can clip to saddle to keep saw close to your side when not using.
Type: 16-inch overall length lanyard with snap
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
High quality 3/4" cushion leather pads with 3 loops and tunnel design to keep climbers stationary. Complete with nylon leg straps and foot straps for added durability. Popular Steel Tree Climber Set with 3 & 1/2" permanent gaff! Contoured shank accommodates...
The long gaff is good for thick-bark trees: Product Features
Velcro climbing pads have a double back cinch loop that provides a snug fit to the leg! Steel insert keeps the climber stationary and is compatible with Buckingham titanium/steel and Bashlin aluminum climbers.
Specs
Compatible with Buckingham titanium/steel and Bashlin aluminum climbers (we don't sell the Bashlin brand but if you own a pair it will work: Specs
Top grain leather. Nickel plated rivets. 1/2"thick felt cushions the leg. Pads have a double layer of leather and are lock stitched and riveted for durability! A climber tunnel is built in to maximize stability.
Contains detailed chapters about: Tree selection and risk assessment General rules for safe climbing Basic tree climbing gear Setting your climbing ropes Tree climbing knots Climbing techniques Tree climbing ethics Run Time: 1 hr 45 min.
5,000 tensile strength. Adjustable from 3 to 6 feet. A safety snap on either end with thimble on spliced end for freedom of movement! Heavy duty 1/2 inch Walthane coated, double braid polyester rope.
Rope Dia: 1/2"Weight: 2.4 oz Sheave Dia: 1-1/4"Side Plate: Alum. A myriad of uses, but commonly used for one handed advance of friction hitches along the climbing line! Tensile: 7,000 lb WLL: 700 lb Sheave: Alum.
The D shape is particularly suited for connection to equipment such as descenders or positioning lanyards. It can be connected to the CAPTIV bar to favor positioning of the carabiner along the major axis, to limit the risk of it flipping and to keep it...
Specs
Certification(s): CE EN 362, EAC, NFPA 1983 Technical Use: Specs
These Climbers also feature a dual purpose "Grip Strip" on the bottom of the climber. The (patent pending) grip strip provides added traction while walking on tree limbs, and doubles as a wear strip to inform you when it is time to replace your "J" Hooks.
Product Features
Clear coat anodized for added wear resistance: Product Features
Aluminum alloy: Specs
Tempered for hardness and strength: Product Features
Ship Wt. .5 lb. A height adjustable elastic keeps the foot in the loop, regardless of shoe type.. The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with...
Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Riveted for extra strength. Overall length is 26". Yellow top grain Latigo steer hide leather! Lower straps are necessary to secure spur sets to the climber's leg. Ten holes for perfect adjustment and nickel plated hardware.
