Made of 16 strand 1/2" rope whipped eye splice to provide maximum safety! Whipped end and eye insure for a secure split tail. Eliminates the need to cut pieces from the end of the climbing line.
Slick shot - designed for accurate throwing! Complete with 14oz cordura nylon throw bag, 150' of 1/8" braided polyethylene snag resistant line, and a durable nylon storage bag.
Specs
150ft of 1/8in braided polyethylene snag resistant line: Specs
The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back buckle and comes with a quick gate connector for attachment to the ascension device.
Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Also, tricks of the trade, knots for the climber, equipment and supplies, skill performance sheets, and safety standards. Illustrated book is recommended for anyone who climbs and works in trees.
Bright high visibility colors enable easy identification. Shot-filled weights; Cordura with 7/8-inch nickel-plated rings. If every tree were the same, one weight would do the job. So you need options! Lower-throwing weights provide the highest entry,...
A myraid of uses, from tying off safety anchors to racking equipment "bandolier" style! Made from military-spec webbing. Safety load rated at 1,200 lb. Assorted colors.1" x 24
And weighs 2.3 lbs. It has an aluminum wheel with a bushing axle (2-1/2 inch thread dia.) and stainless steel side plates. It acts as a false crotch using rigging lines and a friction device to lower cut material.
Carabiner shown on sliding prusik not included with 11CV or 12CV. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. The perfect work positioning lanyard! Provides the climber a means to stay continuously...
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
For even more efficient use, a micro pulley can be secured below the hitch, allowing one hand tending. Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure...
This makes the flipline completely adjustable. A galvanized thimble is installed on one end with a safety locking snap with swivel on the other. Fliplines utilizing steel cores provide additional protection from accidental contact with chainsaws! Fliplines...
Specs
Overall thickness: 1/2 inch, including the 1/4 inch cable and braided cover: Specs
Easy and safe lock-in or out! Adjustable 6 foot lanyard of 1/2 inch loose-lay filament nylon rope. Two top-quality 22SL safety snaps and thimble for freedom of movement. 5,000 lbs test.
This duffel bag is spacious AND durable! Whether you take it out into the field, or just use it for storing those "have to have on hand" products, this arborist tote bag gets an A+! Spacious, durable, and easy to carry, the ATB will be number one in your...
A myriad of uses, but commonly used for one handed advance of friction hitches along the climbing line! Tensile: 7,000 lb WLL: 700 lb Sheave: Alum. Sheave Dia: 1-1/4"Side Plate: Alum.
Do so by tightening the tension bolt until both halves securely join. This attachment also reduces arm fatigue caused by repetitive use. An integrated safety latch prevents accidental deployment during handling.
Product Features
Product Benefits
Integrated safety latch: Product Features
Reduces arm fatigue: Product Benefits
Use with your Notch Big Shot Launcher: Product Features
Improves launch accuracy and consistency: Product Benefits
Ship weight .5 lb. Fits virtually all gaffs. Velcro on and off quickly! Protect your expensive spurs as well as your gear bag with these leather gaff guards. Helps you to be complient with OSHA 1910.268(g)(3)(i) ".
Specs
Steer hide leather: Specs
Nickel plated rivets: Specs
Hook-and-loop (Velcro) straps hold it to the stirrup: Product Features
Ten holes for perfect adjustment and nickel plated hardware. Weather resistant neoprene impregnated nylon. Riveted for extra strength! Upper straps are necessary to secure spur sets to the climber's leg.
Polyester material maximizes tensile strength, while offering an enhanced ability to absorb shock. The braid is tight to prevent snagging, but supple enough for good handling. Solid braid line eliminates milking.
5'8" length, 5,000 lb test. Two safety snaps on either end for easy lock-in or out! A tough, flexible safety strap made of Nybuck - A filament nylon woven into neoprene-impregnated cloth.
Specs
Made of filament nylon woven into neoprene-impregnated cloth: Specs
Full 1/2" size diameter for easier grip. Work load 650 lb. 16-strand, treated polyester with a stabilized nylon core for durability. Wt 7.7 lb per 100 ft. Work load 810 lb. Soft, strong and spliceable! Maximum firmness for better "Footlock" climbing.
Specs
Average tensile strength:: Specs
Firm, low stretch rope holds knots well: Specs
Weight: 10 lbs.
Maximum firmness, which is good for climbing: Specs
Double layered leather palm, breathable stretch nylon back. Protect your hands when you belay/rappel and still have the dexterity needed to tie knots and work with hardware! Low-profile neoprene cuff with a reinforced carabiner hole to attach to your...
Product Features
Size: MD
Ergonomic cut for great dexterity without being too tight: Product Features
Neoprene cuff with Velcro closure: Product Features
Made of high quality leather for the perfect balance of durability and dexterity: Product Features
Compatible with Buckingham titanium/steel and Bashlin aluminum climbers. Buckingham combines their popular Big Buck and Cinch Velcro pad, to create the ultimate climber pad! Adjustable velcro pad with increased surface area and cushion creates superior...
Specs
Compatible with Buckingham titanium/steel and Bashlin aluminum climbers (Bashlin is not a brand we sell, however, these pads will work with them if you have a pair): Specs
For enhanced torso movement. Classic traverse saddle comes with two sliding suspension Dee rings and a batten seat design. Interlocking leg buckles and tongue buckle waist.
11.7mm (0.5 in) diameter. This design provides a rope with good feel that works very well with mechanical ascension devices. Great for advanced and traditional techniques. Smoothest cover for mechanical ascension; low elongation with minimal bounce.
