New ergonomic design makes it easy to open the snap with a gloved hand! In two styles: order with or without a nylon rope thimble to reduce wear. Drop forged steel, 5,000 lb tensile strength.
Specs
Double latch locking system stops hooks from opening by accident: Specs
Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure around a tree trunk creating a secure point for a rigging block etc. For best results, a cow hitch is typically used to secure in place.
Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach around the tree for that friction knot. Red core alerts you of excess wear.
Product Features
Red core alerts you of excess wear: Product Features
Fully adjustable from 2" to 10': Specs
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied! Pressing the Grillon lever will release the line even under load, for quick positioning.
Specs
Reinforced eyes on each end for carabiners (carabiners are not included): Product Features
Provides temporary anchorage to overhead support beam for fall protection systems! 1 3/4" webbing cross-arm strap features a D-ring which slips through a web loop. Rated to 310 lb, tensilestrength 5,000 lb.
Specs
6' length: Specs
Rated to 310 lb: Specs
1 and 3/4" wide webbing: Specs
1 and 3/4" webbing cross-arm strap features a D-ring which slips through a web loop: Product Features
Prevents blocks from twisting. Safe working load of 2,250 lb. Complete with 50' of 1/2" braided BLUESTREAK rope. Combine with the Buck Port-A-Wrap III for the ultimate lowering system.
Aluminum wheel, 3" tread depth, 3/4" max rope diameter. Blocks are commonly used for lowering heavy loads tied under area to be cut with eye sling. Aluminum sheave and bushing. Acts as a false crotch using rigging lines and friction device to lower cut...
Specs
Minimum breaking strength 40,000 lbs.: Specs
Aluminum sheave and bushing.: Specs
Sheave (pulley wheel) is 1.125" wide x 3.455" high.: Specs
An easily adjustable rope lanyard with stiff handling characteristics of of a wire core flipline, without the steel cable! This 7/16"uniline rope lanyard comes with a BuckGrab adjuster for simple and quick length adjustment.
Includes the Buckadjuster one-way cam: Product Features
Aluminum pulley for arborist use! Uses a 1/2 inch rope. Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle. The minimum breaking strength is 3,800 lbs.
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard.
Specs
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
Made of 16 strand 1/2" rope whipped eye splice to provide maximum safety! Whipped end and eye insure for a secure split tail. Eliminates the need to cut pieces from the end of the climbing line.
Ten holes for perfect adjustment and nickel plated hardware. Overall length is 26". Lower straps feature split rings which makes securing the stirrup to your foot fast and easy. Durable, weather resistant neoprene impregnated nylon.
Ten holes for perfect adjustment and nickel plated hardware. Overall length is 26". Riveted for extra strength. Lower straps feature split rings which makes securing the stirrup to your foot fast and easy.
The more pressure that is applied, the deeper into the block the strand and taper are pulled. It also requires less than half the parts (13) required in a traditional system installation (31).
Works very well with mechanical ascension devices. The 24-strand Tite-Braid cover virtually eliminates cover milking and the polyester core creates a firm rope that stays flexible, without work hardening, throughout its service life.
The convenient drawstring top closure provides quick and easy access. Measure 12" in diameter x 14" high and holds 150' of 1/2" or 9/16" rope. A scissor snap offers easy attachment to belt.
Easy and safe lock-in or out! Adjustable 6 foot lanyard of 1/2 inch loose-lay filament nylon rope. Two top-quality 22SL safety snaps and thimble for freedom of movement. 5,000 lbs test.
Lightweight, high strength 12-strand climbing line, and the most widely used rigging line in the arborist industry! It resists snags and has excellent knot-holding ability. As well liked now as when it was first introduced, it is widely known and trusted...
This duffel bag is spacious AND durable! Whether you take it out into the field, or just use it for storing those "have to have on hand" products, this arborist tote bag gets an A+! Spacious, durable, and easy to carry, the ATB will be number one in your...
Lightweight all aluminum construction! Petzl fixed-sided pulley - The ideal component of all pulley hauling systems, the Fixe pulley can easily be coupled with a rope clamp / grab to give an anti-return function.
When you are ready to disconnect, the unique sleeve design opens easily, even if you are wearing gloves! This shape also distributes the load along the major axis of the part. Kong also equipped this carabiner with a keylock system.
Product Features
Specs
Reinforced auto block sleeve meets ANSI lateral stress guidelines: Product Features
Heavy-duty carbon steel construction: Product Features
This design provides a rope with good feel that works very well with mechanical ascension devices. The 24-strand Tite-Braid cover viturally eliminates cover milking and the polyester core creates a firm rope that stays flexible, without work hardening,...
