The handle openings are large allowing easy use, even with gloved hands. Use with rope diameters 8 to 13 mm. This ascender makes a great companion to the Pantin foot ascenders or can be used with the old-fashioned "footlock".
Product Features
Lower holes for connecting a lanyard: Product Features
Weighs 1 lb: Specs
Upper holes through which a carabiner attaches the device to the rope (useful for back-up belays or hauling): Product Features
Measures up to 50 inches fully extended, when relaxed measures 32 inches. 1 and 3/4 inch ring for saw suspension on saddle when not in use and 1 and 1/8 inch ring for saddle attachment.
Specs
6 inch nylon loop with twist half hitch to saw handle (Hi-Vis Yellow): Specs
NOT TO BE USED WITH CHAIN SAWS EXCEEDING 15 LBS. IN WEIGHT: Specs
Measures 32 inches when relaxed: Specs
1 and 3/4 inch ring for saw suspension on saddle when not in use: Specs
Half twist helps keep equipment hanging straight! 1-inch wide nylon webbing, ends heat-sealed to prevent fraying. All straps are double box-stitched for added strength. Ring or 12-inch long strap with a 4 in.
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
Assorted colors.1" x 24 Safety load rated at 1,200 lb. A myraid of uses, from tying off safety anchors to racking equipment "bandolier" style! Made from military-spec webbing.
Note: Knots and bending used to secure the sling will reduce workload limit. For best results, a cow hitch is typically used to secure in place. Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure...
Meets OSHA, ANSI and CSA requirements. 6' length, single leg. Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest...
Product Features
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections: Product Features
Meets OSHA, ANSI and CSA requirements: Specs
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
Major Axis Break Strength 26KN (5845lb). The high inward sleeve strength aids in security, while the large gate opening provides for quick attachment. Gate Opening .99". Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried...
Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
Convenient knurled knobs allow for easy rigging of the upper bushing. The upper bushing will accommodate slings up th 3/4" in diameter. Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength...
Lightweight all aluminum construction! Petzl fixed-sided pulley - The ideal component of all pulley hauling systems, the Fixe pulley can easily be coupled with a rope clamp / grab to give an anti-return function.
SLH12 is rope and snaps only; no prusik. Add your favorite carabiner to the eye to complete the safety lanyard! A 2-in-1 safety lanyard utilizing 12ft Hy Vee 16-strand line which consists of tightly-plied polyester surrounding polyolefin cores, reducing...
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
Blue Moon combines the lightweight characteristics of 11mm ropes and the more conventional size of the 1/2-inch climbing line. The 24-strand Tite-Braid cover viturally eliminates cover milking and the polyester core creates a firm rope that stays flexible,...
Improves the accuracy of your Big Shot Launcher! SherrillTree designed the Notch Big Shot Trigger for use with their Big Shot Launchers . This trigger attachment fits all 1-1/4-inch round utility-grade fiberglass poles.
Product Features
Quick, mid-pole attachment: Product Features
Weight (pounds): 0.70: Specs
Integrated safety latch: Product Features
Use with your Notch Big Shot Launcher: Product Features
Fits all round 1-1/4-inch utility-grade fiberglass poles: Product Features
5'8" length, 5,000 lb test. Two safety snaps on either end for easy lock-in or out! A tough, flexible safety strap made of Nybuck - A filament nylon woven into neoprene-impregnated cloth.
Safe working load of 2,250 lb. Prevents blocks from twisting. Complete with 50' of 1/2" braided BLUESTREAK rope. Combine with the Buck Port-A-Wrap III for the ultimate lowering system.
Velocity Cool is green, blue and white and Velocity Hot is orange, red and white. Samsons proprietary Sure Grip technology gives Velocity a fully broken-in feel right out of the bag when its new.
Specs
Weight: 8 lbs.
7/16" diameter: Specs
Premium grade climbing line designed to offer tree care professionals quick and easy access to the tree tops: Product Features
6000 lb breaking strength, 10 to 1 working load: Specs
24-strand braided polyester construction with stabilized nylon core: Specs
Fits all Weaver saddles listed except 3114. 2" elastic suspenders attach to climbing saddles, distributing weight of attached gear. Adjustable in height. Nickel plated snaps connect to saddles that are equipped with four small dees.
Specs
2" wide straps: Specs
Metal clips ("D-rings") on the ends of the straps, four total: Specs
Interlocking leg buckles and tongue buckle waist. Classic traverse saddle comes with two sliding suspension Dee rings and a batten seat design. For enhanced torso movement.
Pick up a Big Shot Trigger and improve accuracy and reduce arm fatigue! We recommend using the Big Shot with at least 8ft of pole length to eliminate recoil and maximize launch distance of 3 to 20 ounce weights and line.
Specs
One (1) FP400 Leonard 4-foot Orange Fiberglass Sectional Pole: Specs
One (1) FP400B Leonard 4-foot Orange Fiberglass Base Pole: Specs
Works with 3 oz to 20 oz throw weights: Product Features
Top grain leather. 1/2"thick felt cushions the leg. Nickel plated rivets. Pads have a double layer of leather and are lock stitched and riveted for durability! A climber tunnel is built in to maximize stability.
These Climbers also feature a dual purpose "Grip Strip" on the bottom of the climber. Unlike one piece climbers, the CTB Climbers utilize an aluminum lower "J" portion that is precision milled to exact tolerances, then tailor-matched to an aerospace quality...
Product Features
: Product Features
2-5/8 in spike (overall length is 4-1/2 in, usable length is 2-5/8 in): Specs
Clear coat anodized for added wear resistance: Product Features
