The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Different color thimbles to easily distinguish each end of the lanyard.
Specs
Different color thimbles to easily distinguish each end of the lanyard: Specs
For even more efficient use, a micro pulley can be secured below the hitch, allowing one hand tending. Made from Samson Tenex rope! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure...
5,000 lbs test. Two top-quality 22SL safety snaps and thimble for freedom of movement. Easy and safe lock-in or out! Adjustable 6 foot lanyard of 1/2 inch loose-lay filament nylon rope.
Climbing line diameter must be equal or greater than the Blue Streak (12mm). Snap version (HP26) features Buckingham's Steel Safety Snaps. Both models are 26-inch. Prusik devices are common for 2 in 1 safety lanyards and also as friction hitches for climbing...
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
Note: Knots and bending used to secure the sling will reduce workload limit. For best results, a cow hitch is typically used to secure in place. Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure...
5' length available in contrasting colors to differentiate from climbing line. Eliminates the need to cut pieces from the end of the climbing line. Made of 16 strand 1/2" rope whipped eye splice to provide maximum safety! Whipped end and eye insure for...
Slick shot - designed for accurate throwing! Complete with 14oz cordura nylon throw bag, 150' of 1/8" braided polyethylene snag resistant line, and a durable nylon storage bag.
Specs
Durable nylon storage bag: Specs
150ft of 1/8in braided polyethylene snag resistant line: Specs
Aluminum frame with chrome plated steel cams. Use with rope diameters 8 to 13 mm. The handle openings are large allowing easy use, even with gloved hands. The Petzl Ascentree double handled ascender allows for a comfortable double rope climb! The improved...
Product Features
Toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes): Product Features
Upper holes through which a carabiner attaches the device to the rope (useful for back-up belays or hauling): Product Features
Allows you to launch nearly straight up which is nearly impossible to do by hand. We recommend using the Big Shot with at least 8ft of pole length to eliminate recoil and maximize launch distance of 3 to 20 ounce weights and line.
Specs
Product Features
One (1) FP400B Leonard 4-foot Orange Fiberglass Base Pole: Specs
One (1) FP400 Leonard 4-foot Orange Fiberglass Sectional Pole: Specs
We recommend using two 4 foot poles together on the ground (included with the BIGKIT and BIGK kits) to eliminate recoil and maximize launch distance: Product Features
Launches throw-weights nearly 200 feet: Product Features
For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
A galvanized thimble is installed on one end with a safety locking snap with swivel on the other. This makes the flipline completely adjustable. The flipline is 10 feet in length but can be made adjustable by using a cam ascender (item XXRE) or a prusik...
Specs
Overall thickness: 1/2 inch, including the 1/4 inch cable and braided cover: Specs
Unique rope grab with 90 twist eliminates need for swivel or twisted clevis. Fully adjustable from 2"to 10'. Red core alerts you of excess wear. Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach...
Product Features
Fully adjustable from 2" to 10': Specs
Red core alerts you of excess wear: Product Features
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
Contains detailed chapters about: Tree selection and risk assessment General rules for safe climbing Basic tree climbing gear Setting your climbing ropes Tree climbing knots Climbing techniques Tree climbing ethics Run Time: 1 hr 45 min.
Product Features
Run time: 1 hour 45 min: Specs
Tree climbing ethics: Product Features
Climbing techniques: Product Features
Tree selection and risk assessment: Product Features
Double layered leather palm, breathable stretch nylon back. Protect your hands when you belay/rappel and still have the dexterity needed to tie knots and work with hardware! Low-profile neoprene cuff with a reinforced carabiner hole to attach to your...
Product Features
Back made of breathable stretch nylon for excellent fit and ventilation: Product Features
Neoprene cuff with Velcro closure: Product Features
Carabiner hole to attach gloves to harness: Product Features
Ergonomic cut for great dexterity without being too tight: Product Features
Durable double layer of leather in high-wear areas: fingertips, palm, between thumb and index finger: Product Features
Although the wire stop is only 1 1/4 inches long, it holds close to 100 percent of the breaking strength of the strand itself, which is more than 15,000 pounds (if using 3/8-inch EHS strand).
This carabiner features a reinforced auto block sleeve. Kong also equipped this carabiner with a keylock system. When you are ready to disconnect, the unique sleeve design opens easily, even if you are wearing gloves!
5'8" length, 5,000 lb test. Two safety snaps on either end for easy lock-in or out! A tough, flexible safety strap made of Nybuck - A filament nylon woven into neoprene-impregnated cloth.
Arborists commonly use Stable Braid in combination with block pulleys and slings for a strong, wear resistant method of controlled lowering of tree limbs. 1/2-inch, 5/8-inch, and 3/4-inch in orange 9/16-inch in yellow
For price and performance there isn't a better three-strand rigging rope in the marketplace. Spun fiber on the surface offers excellent grip and knot holding. Holds its shape even with heavy use! Pro-Master 3-strand twisted rigging line.
Aluminum sheave and bushing. Aluminum wheel, 3" tread depth, 3/4" max rope diameter. 40,000 lb tensile, 4,000 lb working load. Stainless steel sideplates and axle. Blocks are commonly used for lowering heavy loads tied under area to be cut with eye sling.
Specs
Sheave (pulley wheel) is 1.125" wide x 3.455" high.: Specs
Also, tricks of the trade, knots for the climber, equipment and supplies, skill performance sheets, and safety standards. By Jeff Jepson, Certified Arborist and climbing champion. Includes: P.E.P. - a systematic approach to tree climbing.
Specs
Written by Jeff Jepson, copyright 1997: Specs
Knots for Tree Climbers: Attachment Knots, Friction Hitches, Mid-Line Knots, Bends (End-to-End Tie-Offs): Specs
Works very well with mechanical ascension devices. The 24-strand Tite-Braid cover virtually eliminates cover milking and the polyester core creates a firm rope that stays flexible, without work hardening, throughout its service life.