This improved accuracy allows you to get your weight and line where it needs to go on the first shot. Improves the accuracy of your Big Shot Launcher! SherrillTree designed the Notch Big Shot Trigger for use with their Big Shot Launchers .
Our weights have a tighter, more aerodynamic design than competition for higher throws with more accuracy and ease of flight through limbs and branches. Shot-filled weights; Cordura with 7/8-inch nickel-plated rings.
Specs
Shot-filled weight: Specs
High visibility blank and orange adds visibility in motion: Specs
Bottom loop weights allow quick attachment of carabiners/throw line: Specs
Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach around the tree for that friction knot. Red core alerts you of excess wear.
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
Fully adjustable from 2" to 10': Specs
The red "wear indicator" tells you when it is time to replace it (not repair, replace): Product Benefits
A myriad of uses, but commonly used for one handed advance of friction hitches along the climbing line! Tensile: 7,000 lb WLL: 700 lb Sheave: Alum. Rope Dia: 1/2"Weight: 2.4 oz Sheave Dia: 1-1/4"Side Plate: Alum.
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied! Pressing the Grillon lever will release the line even under load, for quick positioning.
Product Features
Connects to the side or waist attachment points of a harness with carabiners (sold separately): Product Features
Ship wt: 2 lbs.
Available in a 9ft. or 15ft. lanyard: Specs
Reinforced eyes on each end for carabiners (carabiners are not included): Product Features
A mechanical device lanyard, which allows easy flow of line through the cam, but locks when load is applied. Pressing the Grillon lever will release line even under load, for quick positioning: Product Features
Allows you to launch nearly straight up which is nearly impossible to do by hand. We recommend using the Big Shot with at least 8ft of pole length to eliminate recoil and maximize launch distance of 3 to 20 ounce weights and line.
Product Features
One (1) BIG1 Head: Specs
Description: Includes head and two Leonard 4 ft poles
We recommend using two 4 foot poles together on the ground (included with the BIGKIT and BIGK kits) to eliminate recoil and maximize launch distance: Product Features
Ship wt: 9 lb
Works with 3 oz to 20 oz throw weights: Product Features
Designed for use in false crotch systems to save wear and tear on bull ropes! Upper bushing maximizes sling strength and wide side plates protect the rope from contact with rough bark.
The ergonomic molded handle allows for a comfortable yet powerful grip. The toothed cam has a self-cleaning slot to optimize performance even with dirty or frozen ropes. There is a safety catch integrated into the body of the rope clamp to help prevent...
Product Features
Wide lower hole allows the carabiners of the "progress: lanyard and or footloop to be easily attached: Product Features
Wide opening allows the handle to be easily grasped, even with gloves: Product Features
Toothed cam with self-cleaning slot optimizes performance even with dirty or frozen ropes: Product Features
Upper hole for clipping a carabiner around the rope: Product Features
Type: Right Handle
Safety catch is integrated into the body of the rope clamp to help prevent snagging: Product Features
40,000 lb tensile, 4,000 lb working load. Aluminum wheel, 3" tread depth, 3/4" max rope diameter. Acts as a false crotch using rigging lines and friction device to lower cut material.
Fliplines utilizing steel cores provide additional protection from accidental contact with chainsaws! Fliplines are made of 1/4 inch galvanized cable wrapped with a 12 strand polyester braided cover.
Specs
Overall thickness: 1/2 inch, including the 1/4 inch cable and braided cover: Specs
Ring or 12-inch long strap with a 4 in. Half twist helps keep equipment hanging straight! 1-inch wide nylon webbing, ends heat-sealed to prevent fraying. Or choose the 48-inch long 2-in-1 snap.
Type: 16-inch overall length lanyard with snap
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
The high inward sleeve strength aids in security, while the large gate opening provides for quick attachment. Major Axis Break Strength 26KN (5845lb). Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried it, you may never...
Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
The International Society of Arboriculture gives this book their "thumbs up"! Teaches methods of climbing and working safely in trees with a minimum of unnecessary effort and maximum productivity.
Specs
Tools of the Trade: Micro Pulley: Specs
Tools of the Trade:Figure-8 Device: Specs
Knots for Tree Climbers: Attachment Knots, Friction Hitches, Mid-Line Knots, Bends (End-to-End Tie-Offs): Specs
Aluminum pulley for arborist use! Uses a 1/2 inch rope. The minimum breaking strength is 3,800 lbs. Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle.
Complete with 50' of 1/2" braided BLUESTREAK rope. Prevents blocks from twisting. Stainless steel block and tackle with black Derlin sheaves! Stainless steel cam locks rope securely in place while taking up slack in your rigging line.
This duffel bag is spacious AND durable! Whether you take it out into the field, or just use it for storing those "have to have on hand" products, this arborist tote bag gets an A+! Spacious, durable, and easy to carry, the ATB will be number one in your...
Kong designed their extra-large carabiners with a wide gate opening and a high tensile strength. They develop and produce each part in their home country of Italy. When you are ready to disconnect, the unique sleeve design opens easily, even if you are...
Popular Steel Tree Climber Set with 3 & 1/2" permanent gaff! Contoured shank accommodates the ankle bone and the offset stirrup sits in the center of the foot. High quality 3/4" cushion leather pads with 3 loops and tunnel design to keep climbers stationary.
The long gaff is good for thick-bark trees: Product Features
Consists of our CSR312 climbers, leather pads, and nylon leg & foot straps: Specs
CMI engineered this tool to be small and light. This small profile makes it easy to transport — even for a climber! CMI designed the Rope Jack for one-handed operation by one person.
For tree cabling and bracing! Tree grip dead-ends wrap quickly around cable, ends time consuming splicing and clamping, maintains original breaking strength. Pictured with Galvanized Thimble sold separately.
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard.
Specs
Six foot long: Specs
Meets OSHA, ANSI and CSA requirements: Specs
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
The Standard System: is best used to avoid failure of weak branch unions; to avoid excess movement; to maintain structural integrity of trees; to secure large horizontal branches prone to heavy loading; and for guying large transplants.
