For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
Prevents blocks from twisting. Combine with the Buck Port-A-Wrap III for the ultimate lowering system. Complete with 50' of 1/2" braided BLUESTREAK rope. Stainless steel block and tackle with black Derlin sheaves! Stainless steel cam locks rope securely...
An integrated safety latch prevents accidental deployment during handling. This trigger attachment fits all 1-1/4-inch round utility-grade fiberglass poles. The quick, mid-pole attachment allows you to customize the mounting location.
Product Features
Product Benefits
Fits all round 1-1/4-inch utility-grade fiberglass poles: Product Features
The Footpro is a versatile accessory used with handled ascension devices during the "sit-stand" rope climb! The strap can be adjusted to proper length with the double back buckle and comes with a quick gate connector for attachment to the ascension device.
Product Features
Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into: Product Features
Length easily adjusted with the DoubleBack buckle: Product Features
Easy and safe lock-in or out! Adjustable 6 foot lanyard of 1/2 inch loose-lay filament nylon rope. Two top-quality 22SL safety snaps and thimble for freedom of movement. 5,000 lbs test.
Major Axis Break Strength 26KN (5845lb). Gate Opening .99". The high inward sleeve strength aids in security, while the large gate opening provides for quick attachment. Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried...
Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
And weighs 2.3 lbs. It acts as a false crotch using rigging lines and a friction device to lower cut material. 28,000 lb tensile, 2,800 lb working load. Blocks are commonly used for lowering heavy loads These are often attached under the area to be cut...
Not to be used with chainsaws over 15 lbs. Of force is applied! Buckingham's tear away bungee chain saw lanyard holds a chain saw if dropped to one's feet, but will pull apart if the chain saw gets hung up in a falling limb.
Specs
Measures up to 50 inches fully extended to provide ample reach when cutting: Specs
NOT TO BE USED WITH CHAIN SAWS EXCEEDING 15 LBS. IN WEIGHT: Specs
1 and 1/8 inch ring used to attach the lanyard to your saddle: Specs
6 inch nylon loop with twist half hitch to saw handle (Hi-Vis Yellow): Specs
This knot tying kit includes one PRO-KNOT Rope Knot Card, two hanks of high quality static line cord and a practice caribiner. This will allow you to practice those knots you need to know! Six cards are attached together in corner with a brass grommet.
SLH12 is rope and snaps only; no prusik. Add your favorite carabiner to the eye to complete the safety lanyard! A 2-in-1 safety lanyard utilizing 12ft Hy Vee 16-strand line which consists of tightly-plied polyester surrounding polyolefin cores, reducing...
Type: 3 Strand 10 ft Rope Lanyard with Safety Snaps
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard.
Product Features
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
Meets OSHA, ANSI and CSA requirements: Specs
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections: Product Features
Braided and twisted rope provides a secure system. The combination of braided rope and twisted rope offers the best combination for this application. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope.
Specs
Blue Streak 16-strand rope looped around a 3-strand twist nylon rope: Specs
Fully adjustable from 2"to 10'. Lanyard length adjusts with only one hand! And the adjustable cam is always in easy reach, no need to reach around the tree for that friction knot. Red core alerts you of excess wear.
Product Features
The red "wear indicator" tells you when it is time to replace it (not repair, replace): Product Benefits
Red core alerts you of excess wear: Product Features
With the LAD at the user's side, (where it's needed) no longer will the user have to hug the tree to adjust his lanyard.: Product Features
Snap version (HP26) features Buckingham's Steel Safety Snaps. HPE26 is eye-to-eye. Climbing line diameter must be equal or greater than the Blue Streak (12mm). Prusik devices are common for 2 in 1 safety lanyards and also as friction hitches for climbing...
Specs
26" x 12 mm: Specs
Available with a safety snap (HP26), or as an eye-to-eye (same as HP26 but no snap): Specs
We recommend using the Big Shot with at least 8ft of pole length to eliminate recoil and maximize launch distance of 3 to 20 ounce weights and line. Includes Big Shot head and 2- 4ft extension poles.
Product Features
Ship wt: 9 lb
One (1) FP400 Leonard 4-foot Orange Fiberglass Sectional Pole: Specs
Description: Includes head and two Leonard 4 ft poles
Launches throw-weights nearly 200 feet: Product Features
We recommend using two 4 foot poles together on the ground (included with the BIGKIT and BIGK kits) to eliminate recoil and maximize launch distance: Product Features
For anyone who wants to climb - for work or for fun - its easy if you have good training! Your teacher is Peter "Treeman" Jenkins, the father of recreational tree climbing and an ISA-certified arborist and former production climber.
Product Features
Basic tree climbing gear: Product Features
Tree selection and risk assessment: Product Features
Lightweight all aluminum construction! Petzl fixed-sided pulley - The ideal component of all pulley hauling systems, the Fixe pulley can easily be coupled with a rope clamp / grab to give an anti-return function.
Two safety snaps on either end for easy lock-in or out! A tough, flexible safety strap made of Nybuck - A filament nylon woven into neoprene-impregnated cloth. 5'8" length, 5,000 lb test.
Carabiner shown on sliding prusik not included with 11CV or 12CV. The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
Available in: SM - XL. Aluminum O-right attachment point and rope bridge allow for added lateral movement. Wide webbing across back reinforces the light back pad for increased back support.
A safety snap on either end with thimble on spliced end for freedom of movement! Heavy duty 1/2 inch Walthane coated, double braid polyester rope. Adjustable from 3 to 6 feet. 5,000 tensile strength.
The keylock system prevents snagging on your rope or bolts. A wide gate opening and high tensile strength! Kong manufactures this carabiner using high-quality carbon steel. They test each piece to ensure the utmost safety and manufacturing excellence.
Product Features
Specs
Reinforced auto block sleeve meets ANSI lateral stress guidelines: Product Features
Heavy-duty carbon steel construction: Product Features
