Designed with a unique Pull-Down & Twist Sleeve! It's intuitive and once you've tried it, you may never go back to a traditional action sleeve. Major Axis Break Strength 26KN (5845lb).
Specs
Major axis breaking strength 5845 lb ("major axis" is when the carabiner is pulled in both directions lengthwise): Specs
180 ft in length. Achieve higher throws with lighter weights, greater control due to low stretch, and ability to pull down "hangers" due to its high strength. Recommended for use with 10 oz throw bag.
Specs
Ship wt: .5 lb
Description: 400 lb Strength, 1.75 mm line
Extremely high strength, low stretch, and excellent abrasion resistance in a small diameter, light-weight throwing line: Specs
Carabiner shown on sliding prusik not included with 11CV or 12CV. The perfect work positioning lanyard! Provides the climber a means to stay continuously secured to the tree when climbing over obstructions.
Type: Eye-to-Eye Prusik, 10 ft Length. The perfect work positioning lanyard. Provides the climber a means to stay continuously secured to the tree when climbing over obstructions. The prusik is constructed of Blue Streak 16-strand rope, then looped around a 3-strand twist nylon rope. Braided and twisted rope provides a secure system. Carabiner not included with 11CV.
Easily shoots a throw bag and up to 200 feet of line through tree limbs! Simple to operate oversized sling-shot that quickly attaches to heavy duty fiberglass poles. We recommend using the Big Shot with at least 8ft of pole length to eliminate recoil...
Specs
Product Features
One (1) FP400 Leonard 4-foot Orange Fiberglass Sectional Pole: Specs
Launches throw-weights nearly 200 feet: Product Features
One (1) BIG1 Head: Specs
Works with 3 oz to 20 oz throw weights: Product Features
One (1) FP400B Leonard 4-foot Orange Fiberglass Base Pole: Specs
It has an aluminum wheel with a bushing axle (2-1/2 inch thread dia.) and stainless steel side plates. It acts as a false crotch using rigging lines and a friction device to lower cut material.
Rated to 310 lb, tensilestrength 5,000 lb. Provides temporary anchorage to overhead support beam for fall protection systems! 1 3/4" webbing cross-arm strap features a D-ring which slips through a web loop.
Product Features
Specs
1 and 3/4" webbing cross-arm strap features a D-ring which slips through a web loop: Product Features
6' length: Specs
Provides temporary anchorage to overhead support beam for fall protection systems: Product Features
No need for a twisted clevis or swivel. An easily adjustable rope lanyard with stiff handling characteristics of of a wire core flipline, without the steel cable! This 7/16"uniline rope lanyard comes with a BuckGrab adjuster for simple and quick length...
Overall length 8': Specs
Includes the Buckadjuster one-way cam: Product Features
Stainless steel block and tackle with black Derlin sheaves! Stainless steel cam locks rope securely in place while taking up slack in your rigging line. Prevents blocks from twisting.
The Notch Big Shot Trigger dramatically improves your launching accuracy and consistency with the Big Shot Launcher. An integrated safety latch prevents accidental deployment during handling.
Product Features
Customizable mounting location: Product Benefits
Integrated safety latch: Product Features
Fits all round 1-1/4-inch utility-grade fiberglass poles: Product Features
Use with your Notch Big Shot Launcher: Product Features
Choose 12-inch long strap with a 2 1/2 in. Ship wt 0.5 lbs. The snap allows the user to keep the saw attached during use, even at arm's length. Bright orange color. Ring can clip to saddle to keep saw close to your side when not using.
Both the 211CS-5O and the 213CS-5O have a 12 in. strap. The difference in length is the snap or the ring.: Specs
Note: Knots and bending used to secure the sling will reduce workload limit. Constructed from Samthane-coated stable braid spliced with a 6-inch eye on one end! Commonly used to secure around a tree trunk creating a secure point for a rigging block etc.
This makes the flipline completely adjustable. Fliplines utilizing steel cores provide additional protection from accidental contact with chainsaws! Fliplines are made of 1/4 inch galvanized cable wrapped with a 12 strand polyester braided cover.
Specs
Hi-Viz orange: Specs
Overall thickness: 1/2 inch, including the 1/4 inch cable and braided cover: Specs
The minimum breaking strength is 3,800 lbs. Aluminum pulley for arborist use! Uses a 1/2 inch rope. Has aluminum sideplates and aluminum sheave, and the sheave has a bearing in the axle.
Meets OSHA, ANSI and CSA requirements. Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections! Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the...
Product Features
Features lightweight, durable webbing and locking snap hooks for harness and anchorage connections: Product Features
Lanyards have a built-in woven inner core, which smoothly expands 3 1/2' to reduce fall arrest forces, while the outer jacket serves as a back-up web lanyard: Product Features
Aluminum wheel, 3" tread depth, 3/4" max rope diameter. Aluminum sheave and bushing. Stainless steel sideplates and axle. 40,000 lb tensile, 4,000 lb working load. Blocks are commonly used for lowering heavy loads tied under area to be cut with eye sling.
For efficient use, a micro pulley can be secured below the hitch, allowing one hand tending! Eye to eye tails secure to the climbing line with use of several different friction hitches and since both ends secure to a carabiner, the applied friction is...
Shot-filled weights; Cordura with 7/8-inch nickel-plated rings. Bottom loop weights allow quick attachment of carabiners/throw line. Dual colors of black and orange adds visibility in motion!
Specs
High visibility blank and orange adds visibility in motion: Specs
Weight: 8 oz
Bottom loop weights allow quick attachment of carabiners/throw line: Specs
Lightweight all aluminum construction! Petzl fixed-sided pulley - The ideal component of all pulley hauling systems, the Fixe pulley can easily be coupled with a rope clamp / grab to give an anti-return function.
If every tree were the same, one weight would do the job. Our weights have a tighter, more aerodynamic design than competition for higher throws with more accuracy and ease of flight through limbs and branches.
Aluminum waist and leg strap buckles are safe and secure, yet quick and easy to operate. Aluminum O-right attachment point and rope bridge allow for added lateral movement. Available in: SM - XL.
5' length available in contrasting colors to differentiate from climbing line. Made of 16 strand 1/2" rope whipped eye splice to provide maximum safety! Whipped end and eye insure for a secure split tail.
For tree cabling and bracing! Tree grip dead-ends wrap quickly around cable, ends time consuming splicing and clamping, maintains original breaking strength. Pictured with Galvanized Thimble sold separately.
