Agiseek home

Trailer Lighting Trailers Towing For Sale In Hampton

Become a Partner
Amber Light with Reflector - V114A
Prices start at : 4.39 USD

  •  15,000 hour long life bulb
  •  Built-in reflective optics
  •  Shipping Dimensions: Approximately 4.5 x 3.75 x 1.88 inches.
  •  Stud-mount light functions as side marker or clearance light
  •  Weight: Approximately: .17 pounds
  •  Just push stripped power into Quick Lock port to connect
New Brunswick
Hampton
Interior Light - V391C
Prices start at : 7.99 USD

  •  Mounts on 3-1/2 in. centers
  •  Bright 12V interior dome light used for general illumination
  •  Separate ground & lead wires supplied for electrical connection
  •  Lens attaches to metal base
  •  4-9/16 in. W x 2-1/2 in. H
  •  Nylon switch & polycarbonate lens
New Brunswick
Hampton
LED Submersible Trailer Light Kit
Prices start at : 44.99 USD

Everything works Have yet to install. Tested with a portable battery.
  •  Patent pending square trailer lights are DOT compliant and meet FMVSS 108 and CMVSS regulations for trailers under 80 in. wide
  •  All electronics are potted with water resistant resin for a second layer of defense
  •  Shipping Dimensions: Approximately 12.75 x 7.5 x 4 inches.
  •  This product cannot be shipped to: CA
  •  Life of an LED trailer light far exceeds traditional incandescent trailer lights
  •  Low amp draw and durability of an LED provides a maintenance-free light
New Brunswick
Hampton
Amber LED Clearance/Side Marker Light - V169KA
Prices start at : 5.59 USD

  •  Mounts on 3 in. centers
  •  Operates from 9-16 volts
  •  Sealed 2-diode LED light functions as clearance or side marker light
  •  Low cost LED alternative to traditional incandescent 154-series lights
  •  Weight: Approximately: .14 pounds
  •  Ground wire includes #10 ring terminal
New Brunswick
Hampton
7 In. LED Single Row Light Bar
Prices start at : 44.99 USD

Bought these for my duck boat. Compact, well made and bought that at a great price.
  •  Weight: Approximately: 2.13 pounds
  •  IP-67 standard rating water and dust
  •  Works with 12 to 24 volt systems
  •  (6) 3W high performance LEDs
  •  Includes light, (2) mounting feet, quick connect plug and mounting hardware
  •  Breather valve eliminates fogging inside the lens and vent fins help to dissipate heat quickly
New Brunswick
Hampton
High Strength Lens Repair - Amber
Prices start at : 6.99 USD

  •  This product cannot be shipped to: CA
  •  Weatherproof and airtight seal helps block rain, snow and dirt
  •  Weight: Approximately: .15 pounds
  •  Flexible film repairs flat or curved truck and car tail lights and signal lights
  •  Contains 1 sheet 3.75 in. x 7.75 in.
New Brunswick
Hampton
Red LED Clearance/Side Marker Light - V180R
Prices start at : 23.99 USD

  •  Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector
  •  6-diode, oval LED light perfect for light & medium duty applications
  •  Shipping Dimensions: Approximately 5.75 x 3 x 2 inches.
  •  Meets DOT lighting requirements
  •  Includes both lead & ground wire for mounting to all surfaces
New Brunswick
Hampton
Combo Tail Light - V440
Prices start at : 6.79 USD

  •  4-1/2 in. square x 2-7/8 in. high
  •  Shipping Dimensions: Approximately 8 x 6.44 x 3.19 inches.
  •  Mounts on 2 in. centers
  •  Grounds through 1/4 in. mounting studs
  •  Weight: Approximately: .63 pounds
  •  Comes with lead wire & mounting hardware
New Brunswick
Hampton
Universal Combination Tail Light - V445
Prices start at : 13.99 USD

  •  Shipping Dimensions: Approximately 8.94 x 8.5 x 4.5 inches.
  •  Three 1/4 in. diameter mounting studs with 2 in. triangular pattern
  •  Weight: Approximately: .58 pounds
  •  This product cannot be shipped to: CA
  •  Molded housing & wire-loom harness with three lead wires
New Brunswick
Hampton
Red Replacement Lens - 55-15R
Prices start at : 2.99 USD

  •  Fits old style 114A/R, 115A/R, 440/L, 441/L
  •  Weight: Approximately: .05 pounds
  •  Made in the USA
  •  Square clearance/side marker lens
New Brunswick
Hampton
16/4 Ga. 30 Ft. Trailer Cable Wire - Black
Prices start at : 28.49 USD

  •  Temperature rating of -55 degrees celcius to 80 degrees celcius
  •  This product cannot be shipped to: CA
  •  Rated at 60 volts or less
  •  Heavy-duty compact cable protects insulated conductors against weathering, chemicals & abrasion
  •  Color-coded conductors enable easy identification
New Brunswick
Hampton
Nightwatcher 100W Halogen Bulb - VH549
Prices start at : 3.79 USD

  •  For all halogen auxilliary lights using a H3 bulb
  •  Fits blade & bullet terminals
  •  Shipping Dimensions: Approximately 4.75 x 2.88 x 1 inches.
  •  Weight: Approximately: .08 pounds
New Brunswick
Hampton
Over 80 In. W Submersible Rear Lighting Kit - V544
Prices start at : 18.95 USD

  •  This product cannot be shipped to: CA
  •  Includes one each of 452/452L tail light, 25 ft. trailer harness, 48 in. trunk connector, license bracket, mounting hardware & installation instructions
  •  Front side marker/clearance lights, side reflectors & rear identification lights are necessary to meet all DOT requirements
  •  Weight: Approximately: 3.2 pounds
New Brunswick
Hampton
Amber Replacement Lens - 334-15A
Prices start at : 2.19 USD

  •  Fits 334-2 series S/T/T lights
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 8.5 x 6 x .75 inches.
  •  Weight: Approximately: .1 pounds
New Brunswick
Hampton
Universal Stop  Turn & Tail Light - V428
Prices start at : 6.39 USD

  •  Shipping Dimensions: Approximately 6.75 x 5.56 x 3.81 inches.
  •  Mounts with two 1/4 in. studs on 2 in. centers
  •  Weight: Approximately: .67 pounds
  •  Black plastic housing
  •  Wrap-over lens is retained by two screws
  •  Grounds through mounting hardware
New Brunswick
Hampton
Red Replacement Lens - 107-15R
Prices start at : 1.49 USD

  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 5 x 4.5 x .75 inches.
  •  Weight: Approximately: .1 pounds
New Brunswick
Hampton
Surface Mount Oval Stop/Turn/Tail Light V423XR-4
Prices start at : 13.59 USD

  •  Hardwired design with stripped leads eliminates the need for separate plug & reduces connection points
  •  Red
  •  10 diodes, oval LED stop, turn & tail light designed for horizontal installation
  •  This product cannot be shipped to: CA
  •  9-32 volt operating range
  •  Includes decorative snap-on chrome bezel
New Brunswick
Hampton
Red Replacement Lens - 138-15R
Prices start at : 1.79 USD

  •  Weight: Approximately: .06 pounds
  •  Shipping Dimensions: Approximately 5.5 x 4 x .5 inches.
  •  Double bullseye clearance marker lens
  •  Made in the USA
New Brunswick
Hampton
LED Stop/Turn/Tail Light w/License Light - V840L
Prices start at : 32.95 USD

  •  Exceeds all DOT rear lighting & reflex requirements for trailers less than 80 in. wide
  •  Solid state construction - no bulbs to break or burn out
  •  Shipping Dimensions: Approximately 8.25 x 6.25 x 3.5 inches.
  •  Weight: Approximately: .7 pounds
  •  Potted circuity protects against moisture, corrosion, & vibration
  •  Integral, dedicated side marker diode
New Brunswick
Hampton
Amber LED Clearance/Side Marker Light w/Reflex
Prices start at : 5.19 USD

I re-wired my utility trailer with LED lighting and these side marker lights are bright and they are easy to connect in to the tail light wiring.
  •  Operates from 9-16 volts
  •  Mfr. item # V170A
  •  Shipping Dimensions: Approximately 5.75 x 3 x 2 inches.
  •  2-diode LED light functions as clearance or side marker light
  •  This product cannot be shipped to: CA
  •  Ground wire includes #10 ring terminal
New Brunswick
Hampton
2.5 In. LED Red Clearance Light - V162KR
Prices start at : 2.19 USD

  •  Shipping Dimensions: Approximately 6.75 x 5.5 x 1 inches.
  •  Weight: Approximately: .31 pounds
  •  2.5 in. clearance/side-marker light
New Brunswick
Hampton
2.5 in to 2 in Receiver Tube Adapter
Prices start at : 19.59 USD

  •  High strength carbon steel construction
  •  Weight: Approximately: 3 pounds
  •  Protected by a highly durable carbide powder coat finish
  •  1-year limited manufacturer's warranty
  •  CNC-formed, robotically welded, and mechanically descaled for a perfect fit
  •  Model # 45405
New Brunswick
Hampton
Red Mini Light Bar - V107-3R
Prices start at : 9.79 USD

  •  Mounts on 16-1/8 in. centers
  •  Economical identification bar for over 80 in. applications
  •  Corrosion-resistant with powder-coat finish
  •  Shipping Dimensions: Approximately 18.75 x 2 x 1.63 inches.
  •  16.63 in. length of light bar
New Brunswick
Hampton
12 in Standard O-Track
Prices start at : 12.99 USD

  •  Use with single or double stud fittings
  •  4,000 lb break strength
  •  Ideal for securing cargo to trailers
  •  This product cannot be shipped to: CA
  •  Aluminum design will not rust
  •  Screw or bolt to surface
New Brunswick
Hampton
1-3/4 in Black Spring Tie Steel Plates - 2 Pc
Prices start at : 10.89 USD

  •  Fits 1-3/4 in spring width and 1/2 in U-bolts
  •  New and used trailer repair
  •  Includes 2 plates
  •  Shipping Dimensions: Approximately 9 x 6 x 3 inches.
  •  Weight: Approximately: 2 pounds
New Brunswick
Hampton
1-3/8 in Trailer Steel Axle Spindle Kit
Prices start at : 19.99 USD

  •  This product cannot be shipped to: CA
  •  Cold rolled steel construction
  •  Includes spindle, washer, cotter pin, and castle nut
  •  Model # A204
  •  For use with 3,500 lb axle
New Brunswick
Hampton
10 ft x 5 ft Black Multi-Purpose Utility Steel Trailer
Prices start at : 1249.99 USD

I use it for hauling my four wheeler , zero turn lawn mower and motor cycle. Fleet farm, needs to learn how to store there equipment. Saves wear and tear on my pickup. Well built and should last a long time.
  •  Trailer bed measures 10 ft L x 5 ft W x 12 in H
  •  This product cannot be shipped to: CA
  •  Solid steel 12 in sides
  •  Trailer includes two 15 in tires on silver rims
  •  Model # U51015ALBWFB1
  •  4 in x 2 in tongue with a 3 in x 2 in angle frame
New Brunswick
Hampton