Timberwolf Conveyor

To remove earth from basement max 1.5 feet large and 20 feet long ontario or quebec To remove earth from basement max 1.5 feet large and 20 feet long ontario or quebec

Looking for a sixteen foot belt conveyor to feed my mobile seed cleaner. I need a hopper on the bottom end of the conveyor and a hydraulic drive at top. I have tried using the conveyor that rolls up inside a six inch tube but have found that the belt...

This is the technology of choice in new engineered wood panel plants, but can also be used to replace aging equipment in existing plants where they can usually produce some combination of more production, better consistency, better quality and lower emissions.

Vertical and horizantal box spreaders are available to spread all types of solid materials homogeneusly. Tosun Tarim is the leader in innovative box spreaders, with almost 34 years of experience.

2018 Akron GTT4010

2009 Brandt 1545LP $16,402.00

All new bearings! Used Batco 1314 with 5 HP electic motor.

8,000 bph, 4 years old, 7.5hp 1ph motor included, winch included

Brandt Conveyor 2021LP, Like New

NEW, Batco 1590

2018 Akron EXG300

2018 Akron EXG300

Model 1545 Tube Conveyor (Shown) 1525, 1530, 1535, 1540, 1545 Tube Conveyor Capacity Up to 6,000 BPH* *Capacity depends on material, moisture, density, and angle Tubing 10” Diameter Tubes Belt 15” 2 Ply Chevron Belt Speed Standard 600 FPM Top Drive...

6000 BPH 10" Diameter, 14 Gauge Tubing Steel or Stainless steel avaialble

6000bu/hr pit conveyor

For use up to 40 degrees. Electric power 5hp. 30ft long Capacity varies depending on angle of use. Portable cleated belt conveyor.

#D140 Blackwell 15' Conveyor

2-ply belting with 3/16"x1/16" covers. • 35° x 5" dia. • 25hp electric motor drive with Leroy Somer 215 shaft mounted speed reducer. • 24" deep lattice frame construction with 3"x3"x1/4" chord angles.

6' receiving hopper with 6" rubber flashing. 2-ply belting with 3/16"x1/16" covers. 36" x 40' Channel Frame Specifications: 15 HP WorldWide industrial grade motor and Leroy Somers 307 shaft mount reducer.

30" x 80' Truss Frame w/Radial Stacking Carrier

13 1/2" Self-cleaning flat bar tail pulley with 1 15/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups. Belt speed approximately 320 FPM. Drive, nip, pinch-rail, tail pulley guards.

13 1/2" Self-cleaning flat bar tail pulley with 1 15/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups. Belt speed approximately 320 FPM. Drive, nip, pinch-rail, tail pulley guards.

• Drive, nip, pinch-rail, tail pulley guards. • 35° x 5" dia. • 15 HP electric motor drive with Leroy Somer 207 shaft mounted speed reducer. 6' receiving hopper with 6" rubber flashing.

13 1/2" Self-cleaning flat bar tail pulley with 1 15/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups. Belt speed approximately 320 FPM. Drive, nip, pinch-rail, tail pulley guards.

2-ply belting with 3/16"x1/16" covers. CEMA "C" troughing and return rollers. Drive, nip, pinch-rail, tail pulley guards. 36" x 60' Portable Conveyor Reconditioned Specifications: Portable straight axle under carriage 20hp electric motor drive with Leroy...