Supplies Grow Lights For Sale In Minnesota

Features: • Super lightweight (3.4 lbs) • Priced to fit any budget • European made high performance specular aluminum • Wide and bright light delivery • 5-year warranty on reflective materials Size: 12-1/2″ x 19-3/4″ x 6-1/2″ Instruction...

Perfect for greenhouses that use crop rotation or crop zoning. The low-heat lamps remove the need for fans or temperature control, but provide a complete spectrum across a large canopy space.

Features: • Internal RF protection • Only ballast on the market designed for vertical operation • Dimmable — saves energy in 3 low light situations • Runs both MH & HPS bulbs • Dual voltage – 120/ 240 volt (also generator ready!) • 3-year...

Product Specifications (PDF) Grower's Tip: This setup uses 40-50% less energy than comparable HID systems, saving you money without sacrificing power or production. If so, California Lightworks SolarFlare Full Cycle is for you.

And with a whisper-quiet low RPM high CFM 80mm axial fan, you'll never know it's there. Product Specifications (PDF) Grower's Tip: The specially-designed power outlet plug allows up to 10 fixtures to be connected together for maximum coverage using only...

Our 240 Volt Power Cords (BACD6, 8ft and BACD61620, 20ft) are required with all ballasts using a 240v power supply. Available in 8-ft and 20-ft sizes. We offer a full range of power supply cords as well as plug adapters to switch from Hydrofarm ballasts...

The exclusive chemistry in these bulbs provides ratios of red, blue and green spectral energy that better meet the needs of plants compared to other brands. It is used by experienced growers to produce compact, bushy plants with extremely tight internodal...

Over time magnetics become louder, produce less light, emit more heat and use more electricity. Purchase a 240v power cord (sold separately) if using a 240 volt power supply. More light equals more yield! The Lumatek Ballast produces up to 30% more light...

Power cord) • ONE Philips CMh Lamp (315W, 3100K) (33,000 Rated Initial Lumens) • ONE Waterproof Lock & Seal Cord Set (15 ft. We don't need no stinking reflector! Our discounted ceramic metal halide grow light kit is a favorite with indoor gardeners...

Try them with your next grow — you'll be happy you did! Benefits: • Maintains results after multiple growth cycles — saves you money! • High quality construction from a brand you trust • Produces noticeably bigger, fuller flowers and heavier...

Simply put, you get more “sun” for your money. Use to provide coverage over a 5 ft. Power cord) • ONE Radiant 6 AC Reflector (21″ x 25″ x 9-3/8″) (Includes fully-sealed lens system with built-in socket and lock & seal cord set) • Hangers,...

It also has supplemental UVB bulbs that offer an optimal finishing environment for a robust, fully developed crop. Energy savings, growing efficiency and high yields equal huge benefits for growers using this sophisticated product.

BLOWOUT SALE! The best in the business! Packed with numerous features, the Daystar Reflector by Hydrofarm is cool running, compact and lightweight for the ultimate growing experience.

Need to change the timers? This 120v lighting controller allows you to control as many as 24 1,000-watt lights in 6 separate zones. Setup is simple because the unit can be wired directly into your main power source, and then hung on a wall for easy access.

May be used in a horizontal or vertical position – inside or outside the plant canopy. Features: • Lightweight (less than 10 lbs.) • 8-foot grounded power cord • Easy to hang • Convenient on/ off switch • Accepts Compact Fluorescent Bulbs...

Includes a built in socket and cord set and a completely sealed lens system, which is hinged for easy bulb exchange. The XtraSun 6 Air Cooled Reflector by Hydrofarm offers very good performance at a cost effective price.

Easy to install. A full 12-band light spectrum and selectable switch for 2 growth stages adds to the amazing performance of these units. Size: 19”l x 9”w x 3”h. The difference is the PAR or Photosynthetic Active Radiation (the measurement of the...

Grower's Tip: For maximum production, stack two or more layers of grow trays and mount these lights vertically. Lightweight and energy efficient, its slim design provides the maximum volumetric area for plant growth.

Features: • Coolest running • Ultra-quiet with ISO-mount silencer • Rugged and durable • North American brand components • 8 year warranty • Compatible with all Hydrofarm reflectors and most others Size: 8″ x 9″ x 12″ tall Multi-volt...

MLC-8X Instruction Manual (PDF) MLC-8XT Instruction Manual (PDF) MLC-8DX Instruction Manual (PDF) Grower's Tip: Although these Master Lighting Controllers can be wired for 120v operation and used in conjunction with 120v ballasts, this is NOT an ideal...

High efficiency design with a premium European specular insert means more light from one of the coolest running fixtures on the market. Features: • Available with 8 in.flanges for super cool-ability • Includes a built-in socket and 15-foot pre-wired...

Note that 120V systems can safely use half of the outlets (6 in this case) compared to 240V systems. Make lighting management one step easier with the Autopilot Commercial High Power 12 Light HID Controller (APCLC12DX).

Features: • Engineered to the American National Standards Institute (ANSI) specifications • Designed to drive MH or HPS bulbs properly with separate wire leads • Simple switch converts from sodium to halide power • Compatible with all Hydrofarm...

Includes: • ONE Standard High Intensity Bulb ( Metal Halide MH or High Pressure Sodium HPS — select from drop down menu) • ONE XtraSun Switchable Ballast (5-3/4″ x 7-3/4″ x 13″) (Dual voltage, 120V/240V with 8 ft.

Features: • Initial Luminous Flux (lm): 60,000 • Luminous Efficiency (lm/W): 136 • Color Temperature (K): 2,050 • PAR (umol/s): 713 • Photo Flux (phyto-lm):128,000 Grower's Tip: Many high pressure sodium lamps, including the 600w Hortilux, have...

Each of the outlets in these timer boxes are wired directly to 120/240V power, and controlled by one 120V trigger cable. Features: • Four 120/240v outlets for running ballasts — no need to change out power cords! • Maximum wattage: 4000W (1000W/...

Footprint: 3′ x 4' Input Voltage: 100-240V AC Power Input Output Voltage: UL Standard Output Voltage – Less than 76V DC Setup & Operation (PDF) Grower's Tip: The quality of light absorption and photosynthesis this system allows creates an increase...