Their convex striking faces resist cracking, chipping, and splitting. Our Dead Blow Hammers increase your striking force by up to 40%. The poly material resists damage caused by certain chemicals.
Product Benefits
Specs
Weight: 2-4/5 Pounds
Convex surface resists cracking, chipping, and splitting: Product Benefits
Made in the USA!: Product Features
Head length (inches): Varies - see product page: Specs
Resists chemical damage and corrosion: Product Benefits
Overall length (inches): Varies - see product page: Specs
Reduced shock and vibration. Great for many one-handed tasks ranging from demolition to driving stakes. This club hammer features Fiskars' patented Isocore shock control system to reduce shock and vibration by 2 times.
Pick length is 3 and 3/4". Pick end side digs and breaks up soil for removal. Weight is almost 2 lb. 16" fiberglass handle. Mattock measures 3" W x 4" L. This little tool is great for getting in tight spots for planting and more! Unique, fully forged...
Specs
16" fiberglass handle: Specs
Mattock part is a "scoop" shape that helps remove soil: Product Features
Mattock measures 3" W x 4" L. Pick length is 3 and 3/4". Ovarall head length is 9 and 1/2: Specs
All-purpose demolition and construction tool 4-lb double-face sledgehammer with a 16-in. Fiberglass handle. This tool is ideal for use with chisels, as well as driving stakes and wedges.
Product Features
4-pound double faced forged steel head: Product Features
16-inch shock-absorbing Fiberpro fiberglass handle: Product Features
16" straight grain hickory handle with comfort grip. Comfort, balance, superb finish, and a head that begs to be used to dig, make this the right tool for planting! Ideal for working in confined areas, shallow planting, clearing ground cover, digging...
With a long list of uses, Halders simplex mallets have become a hardscaping must. This versatile mallet is a hardscaping must! Simplex 7-pound wall mallet with 80mm replaceable faces.
Choose from either a black face for dirtier jobs or a white face for clean, non-marring work. Replacement face for the Vaughan VRRM Replace the face of your Vaughan 24-Oz Rubber Mallet.
Made from American hickory for added strength! Seymour designed this 36-inch American Hickory handle for their Michigan Single Bit Axes. Click HERE to find them! These contractor-grade axe handles feature a curved grip.
This simple tool saves your back! These ergonomic handles help you avoid serious bodily injury from over-exertion. Save your back and turn work into exercise! Ecoturf Midwest designed their HEFT ergonomic handles with no moving parts.
Fits Shaft Diameters: 1-1/5 inches to 1-1/3 inches
Made in the USA. Head with large smooth striking face, traction bars for reduced slippage and improved control when prying, as well as magnetic nail holder. Designed for driving, prying, splitting and pulling! Featuring a 24 oz.
Specs
Handle is flared on the end for better grip: Product Features
The perfect one-hand tool for confined areas! Ideal for breaking up hardened surface soil in dry weather, removing weeds, ground cover, or shaping the ground for detailed landscaping.
Vaughan designed the iron head of this hammer for uniform clamping pressure to both the hardwood handle and its 2 in. Rawhide faces for uniform wear and increased durability. You can also rotate the 2 in.
Product Features
Hardwood handle: Product Features
Rawhide faces are 2 in. in diameter: Product Features
Use this tool when working with 3-inch or smaller potted planting beds. Dig holes faster and easier with our Power Planter Bulb Auger & Bedding Tool! This auger bit features a 3/8-inch non-slip hex drive, so it fits into most cordless or electric drills.
Specs
3/8-inch non-slip hex drive: Specs
Drill not included: Specs
3in W x 7in L: Specs
Made in the USA: Specs
Additional uses for our bulb auger include mixing fertilizer in small beds, mixing paints or small batches of cement and mortar, tilling small planter boxes, and mixing polymers in soil.: Product Features
Threaded faces allow for fast and easy replacement! Nupla makes these Quick-Change replacement tip for use with their Quick-Change Dead Blow Hammer - SPI-256 . These faces measure 2-1/2 inches in diameter.
MILES of twine. It is certainly within the pull I plan on pulling even with gloves on. Both rolls together this is 15.1515... Customer for life but I doubt I will ever be able to use up just one roll.
✓ Extra-long fibers for consistent trouble free baling, uniformity, and true length
✓ Weight: Approximately: 26 pounds
✓ This product cannot be shipped to: CA
✓ Shipping Dimensions: Approximately 21 x 12 x 8 inches.
✓ Jaguar offers maximum baling productivity for people who demand the toughest, maximum designed twine in the industry
Overall length: 19-3/4 inches Ship weight: 6 ounces Keep your knife within reach! This leather sheath fits 4042T - Leonard Wavy Edge Stainless Steel Cut-All Knife or other similar tanto knives with blade lengths of 13 inches or less.
Product Features
Fits 4042T Leonard Wavy Edge Stainless Steel Cut-All Knife: Product Features
Flip so the leg posts are securely on the floor for reaching high places or for stationary sitting. The step size is 14 inches x 9 inches. Seat size is 14 inches x 7 7/8 inches. Multi-purpose creeper seat and step stool combo for your needs in the shop!...
Both handles are made of sturdy hickory wood. For Halder Simplex 80mm Mallets Choose from either a 16-inch standard style or a 28-inch sledge-style replacement handle for simplex 80mm mallets.
Crescent Brand Compact Tools Sets are Tough Enough to Meet the New ANSI and ASME Strength Specifications. Save Time and Money When You Keep These Tools Handy for On the Spot Repairs! Compare these Crescent brand tools sets to any others and you'll see...
Specs
Also available in 148 and 170 piece tool sets. See item #'s CTK148MP and CTK170MP: Specs
