Sprayer Pressure Regulator

Too much pressure can expand the emitters or cause drip line failure, leaving you with a costly and time-intensive repair. Use to replace a damaged or worn unit or to create your own drip irrigation system with our other irrigation components.

The Flora Flow Pressure Regulator brings down your garden hose water pressure to 10 psi and reduces the water flow to less than 8 gallons per hour. This helps prevent both damage to the water emitters in the drip tape and over watering.

Too much pressure can expand the emitters or cause drip line failure, leaving you with a costly and time-intensive repair. Use to replace a damaged or worn unit or to create your own drip irrigation system with our other irrigation components.

Low Volume Vineyard/Orchard Sprayer. Low Volume means 200lit. Tank trailed, Sprayer aggregate on tree-point-hich 25% less spray product. No power transmission between tractor and tank, allows for tight turns.

This is $15,000 worth of equipment selling for only $6000.00 OBO Don\'t be afraid to make an offer. All equipment must go. 3 Inda Gro Pro Lights 10 Hydra Farm Lights 2 CO2 machines Lots of pots, soil, food Big incubator for babies! Moving out of state...

DIG's hose thread preset pressure regulators reduce and regulate the incoming pressure of the household's water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI.

Used to reduce and regulate the water pressure entering a low volume irrigation system, the 30 psi preset pressure regulator can lower the incoming pressure from as high as 150 psi to a downstream pressure of 30 psi at a flow range of 0.5 to 12 GPM.

The Orbit 25 psi Faucet Regulator keeps water pressure to 25 psi. For outdoor use with cold water only. This reduces high pressure damage and drip system failure.

The Orbit 25 psi Faucet Regulator keeps water pressure to 25 psi. For outdoor use with cold water only. This reduces high pressure damage and drip system failure.

Our LED Grow Light included below products: 12W LED Grow Light, 50W LED Grow Light, 90W LED Grow Light, 120W LED Grow Light, 150W LED Grow Light, 200W LED Grow Light, 250W LED Grow Light, 300W LED Grow Light, 600W LED Grow Light, 1200W LED Grow Light,

LIGHTING:1000watt hilux hps bulb, 1000watt Hydrofarm ballast and Valubrite reflective air coolable hood with 4 inch flanges. Everything is pretty much brand new, I used it all for one harvest (2-3 months) and now I don't have the place to use it.

This female inlet - female pipe thread outlet regulator allows for adjusting the pressure of your system from 28 -60 PSI. Use the pressure regulator on any irrigation system that needs a lower pressure.

DIG's pipe thread preset pressure regulators reduce and regulate the incoming pressure of the household's water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI.

Used to reduce and regulate the water pressure entering a low-volume irrigation system, the 30 psi preset pressure regulator can lower the incoming pressure from as high as 150 psi to a downstream pressure of 30 psi at a flow range of 0.5 to 12 GPM.

FHT 25 psi Regulator is designed to connect to a standard hose bib. This regulator helps maintain optimum pressure and water flow to the drip line and emitters. Featuring a capacity of 20 GPM.

This Pro Series pressure regulator maintains water pressure to 25 psi. Designed for above or below ground installation. This reduces high pressure damage and drip system failure.

The DIG D54 combines a 155 mesh screen filter with a 25 psi preset pressure regulator in one product for the protection of a drip irrigation systems and components. Fewer parts and fittings reduce the chances of leaks occurring at threaded connections.

We have found a good sale in 62 countries and regions, such as Southeast Asia, The middle-east, Africa, Europe and America etc., and our products have been widely appreciated for providing reliable performance and received good evaluation from the users.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability.

Overall dimensions 5" in diameter and 12" high. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability.

The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.