Snow Removal Parts Accessories Snow Removal Equipment For Sale In Plano

• ✓ Easily bolts onto existing holes on top of blade
• ✓ For use on 88 in. SNOWBEAR snowplows
• ✓ Made of rugged material for long lasting usage
• ✓ Includes: 88 in. rubber deflector, mounting bar and hardware

• Manufacturer Warranty: 1 Year Limited
• Returnable: 90-Day

• ✓ Reversible for longer life
• ✓ Non-abrasive material helps prevent scratches

• Returnable: 90-Day
• Fits Models: Fits most two-stage snow throwers
• Product Depth (in.): 13.5
• Fits Brands: Universal

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 4.88 x 4.13 x .88 inches.
• ✓ 3/4 in. x 3-1/2 in.
• ✓ Weight: Approximately: .54 pounds

• Returnable: 90-Day
• Fits Brands: Snow Joe
• Manufacturer Warranty: Satisfaction Guaranteed
• Easy installation with quick assembly guide: Yes
• Part/Accessory Type: Drift Cutter

• ✓ Weight: Approximately: 9.04 pounds
• ✓ One pair - 2-link spacing
• ✓ Fits tire sizes 13x5x6, 14x4x6
• ✓ Shipping Dimensions: Approximately 6.75 x 5 x 4.75 inches.

• ✓ Meets API TC specification
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: .56 pounds
• ✓ Shipping Dimensions: Approximately 5.13 x 2.75 x 1.75 inches.

• ✓ 3/4 in. x 4 in.
• ✓ Replacement snow plow part
• ✓ Replaces Western 93061
• ✓ Weight: Approximately: .54 pounds

• ✓ Store in a clean dry place. Never store a wet cab in an enclosed area as it can develop mildew
• ✓ Open front for easy chute control access
• ✓ Installation is easy with a special clamp for quick assembly and requires no drilling to install

• Features: No Additional Features
• Manufacturer Warranty: 2 year consumer warranty.
• Part/Accessory Type: Enclosure

• ✓ This product cannot be shipped to: CA
• ✓ Replaces Western 23039
• ✓ Trip springs for Western plow
• ✓ Made in the USA

• ✓ Made from 1018 steel
• ✓ Each spacer is 4 3.8 in. W
• ✓ Horizontal slot is 3-3/4 in. W, enough to handle 3 in. bolt spacing for Ariens machines
• ✓ Each spacer is 1/8 in. thick

• Fits Brands: Ariens and any machines that need spacers that have a bolt pattern up to 3" on center max.
• Part/Accessory Type: Skid Shoe/Mat

• ✓ Includes convenient storage pouch
• ✓ Storage pockets
• ✓ Snow blower not included

• Returnable: 30-Day
• Number of sides: 3
• Manufacturer Warranty: None

• ✓ Shipping Dimensions: Approximately 14.5 x 4 x 1 inches.
• ✓ Weight: Approximately: .21 pounds
• ✓ Fits all Poulan Pro snow throwers
• ✓ Replace old and worn snow thrower belts with Poulan Pro Snow Thrower Impeller Belts
• ✓ This product cannot be shipped to: CA

• ✓ 90 degree swivel elbow
• ✓ Weight: Approximately: .3 pounds
• ✓ Replaces Meyer 21855
• ✓ This product cannot be shipped to: CA

• ✓ Type A old style coil 3/8 in. bore for use with Meyer or Diamond snowplow
• ✓ Weight: Approximately: .21 pounds
• ✓ 3/8 in. bore
• ✓ This product cannot be shipped to: CA

• ✓ Recommended for use in air-cooled, 2-cycle applications where an API TC, JASO FD, FC or ISO-EGD product is preferred
• ✓ Formulated with premium base oils & low additive package that provides excellent lubricity & detergency performance
• ✓ NOTE - Do not use in engines requiring an NMMA TC-W3, TC-WII or TC-W product
• ✓ Shipping Dimensions: Approximately 4.47 x 2.05 x 1.43 inches to 14 x 11 x 9 inches depending on size selected.
• ✓ Weight: Approximately: .28 to 25 pounds depending on selected size
• ✓ Synthetic blend formula

• ✓ Installs in approximately 1 hour using only a wrench
• ✓ 13 cu. ft. of interior room
• ✓ Works with Ariens, Toro, Cub Cadet, Honda, Husqvarna and other snow thrower models

• Product Depth (in.): 24.5 in
• Product Height (in.): 56 in
• Fits Brands: Ariens, Toro, Cub Cadet, Honda, Husqvarna, etc.

• ✓ Complete kit fits Meyers E-47/E-60 hydraulic units
• ✓ Replaces OEM part number 15606
• ✓ Weight: Approximately: .45 pounds
• ✓ Designed for use with the Meyer line of snowplows

• ✓ Shipping Dimensions: Approximately 6.75 x 4.75 x 3.5 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Weight: Approximately: 7.18 pounds

• ✓ 3/4 in. diameter with 1/8 in. wall
• ✓ Made of low temp nylon
• ✓ Weight: Approximately: .8 to 1 pounds depending on selected size
• ✓ One pair fluorescent orange rods
• ✓ Shipping Dimensions: Approximately 33 x 2.5 x 1 inches to 40 x 2.5 x 1 inches depending on size selected.

• ✓ Color: black
• ✓ Original wide-tip design gives maximum float over gravel and grass
• ✓ Tip is designed to penetrate snow and ice down to the pavement

• Product Depth (in.): 12
• Fits Models: Any that have a 3.5 in. and 5.75 in. Slot Spacing mounting bolt pattern.
• Fits Brands: Any that have a 3.5 in. and 5.75 in. mounting bolt pattern.

• ✓ Weight: Approximately: .31 pounds
• ✓ Protects your snow blower from damage when the impeller comes into contact with a solid object
• ✓ 1.5 in long shear bolt
• ✓ includes 4 shear bolts and 4 hex nuts
• ✓ Item measures 6.75 in L x 2.75 in W x 1.5 in H
• ✓ Designed for use with MTD 2 stage snow blower models manufactured in 2004 and prior except for the 33 in model # E9931

• ✓ All mounting hardware included
• ✓ 1-year warranty

• Returnable: 90-Day
• Fits Brands: Home Plow by Meyer
• Product Depth (in.): 12
• Product Height (in.): 6

• ✓ Durable resin construction
• ✓ Weight: Approximately: 1.4 pounds
• ✓ Shipping Dimensions: Approximately 18.5 x 15.8 x 10 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Great for applying ice melt, sand or salt to walks & driveways

6

• Returnable: 30-Day
• Product Height (in.): 6
• Designed especially to protect your cleared surfaces as well as the snow blower itself: Yes
• Fits Brands: Gxi
• Product Width (in.): 6
• Fits Models: 30SBM16, 36SBM16, 45SBM16, 30SDM16, 36SDM16, 45SDM16

• ✓ Shipping Dimensions: Approximately 6.75 x 5 x 4.75 inches.
• ✓ 22x11x10
• ✓ Weight: Approximately: 10.13 pounds
• ✓ 23x10.50x12
• ✓ 22x11x8
• ✓ 24x9.50x12

• ✓ This product cannot be shipped to: CA
• ✓ Very high quality and durable replacement part
• ✓ Includes 1 shear bolt and 1 nut per poly bag
• ✓ Shipping Dimensions: Approximately 6.5 x 4 x .25 inches.
• ✓ Item assembled measures 0.25 in L x 0.25 in W x 2 in H
• ✓ Ariens Shear Bolt and Nuts for their Compact and Sno-Tek Snow Blowers are designed specifically to handle their load limits preventing ruptures and damage

• ✓ Fits Snow Joe models 323E + iON13SS
• ✓ 2-blade replacement paddle auger
• ✓ Easy installation with quick assembly guide

• Fits Brands: Snow Joe
• Returnable: 90-Day