Snow Removal Parts Accessories Snow Removal Equipment For Sale In Norwalk

• ✓ For use with Toro power clear and CCR single-stage snowblowers model years 2014 and newer
• ✓ All necessary hardware for replacement included
• ✓ Kit includes 2 extended life replacement paddles (Part # 125-1128)

• Part/Accessory Type: Skid Shoe/Mat
• Manufacturer Warranty: 1-year

• ✓ High quality belt lasts for years
• ✓ To maintain throwing power, belt will need to be tightened over time
• ✓ Snowblower Auger Belt is a replacement auger belt for PowerSmart 2-stage gas snowblowers

• Returnable: 90-Day
• Fits Brands: Powersmart
• Part/Accessory Type: Drive Belt

• ✓ Meets API TC specification
• ✓ Weight: Approximately: 2 pounds
• ✓ High performance formula
• ✓ View stripe for easy Mixing

• ✓ Includes 2 skid shoes and mounting hardware
• ✓ Can be adjusted for different clearing depths
• ✓ Orange powder coated steel for corrosion resistance

• Part/Accessory Type: Skid Shoe/Mat
• Fits Models: All Ariens Compact, Deluxe and Professional model snow blowers.
• Product Width (in.): 6 in

• ✓ Includes 2 plates
• ✓ Shipping Dimensions: Approximately 8.25 x 5 x 1.75 inches.
• ✓ Weight: Approximately: 1 pounds
• ✓ Snow blower skid height adjuster

• ✓ Color: black
• ✓ Helps protect blower against damage
• ✓ Original wide-tip design gives maximum float over gravel and grass

• Product Height (in.): 3.25
• Fits Models: Any machine that as a bolt pattern 2.5" or 5" center to center
• Returnable: 90-Day

• ✓ 23x10.50x12
• ✓ Fits the following tire sizes
• ✓ Shipping Dimensions: Approximately 6.75 x 5 x 4.75 inches.
• ✓ This product cannot be shipped to: CA
• ✓ 23x10x12
• ✓ 22x11x10

• ✓ Original wide-tip design gives maximum float over gravel and grass
• ✓ Designed to lift snow blowers up over sidewalk cracks or bumps
• ✓ Set of 2 matching skids

• Part/Accessory Type: Skid Shoe/Mat
• Fits Brands: Any that have a 2 in. or 4.75 in. mounting bolt pattern.
• Remote Access: No Remote Access

• ✓ This product cannot be shipped to: CA
• ✓ Kevlar belts are oil, heat, and crack resistant
• ✓ Weight: Approximately: .15 pounds
• ✓ Replacement drive belt also fits 24 in width snow blowers built between 1990-2001
• ✓ Replacement drive belt for Toro/Wheel Horse snow blower models 38190, 38195, 38196, 924 Powershift, CCR138400, and CCR138191
• ✓ Shipping Dimensions: Approximately 15.25 x 4.25 x .63 inches.

• ✓ Replaces OE #738-04124
• ✓ For MTD 300/500/600-series 2-stage snow blowers made in 2005 and later
• ✓ Easy to install

• Part/Accessory Type: Shear Pin
• Product Width (in.): 2.75
• Product Height (in.): 6.5

• ✓ This product cannot be shipped to: CA
• ✓ One pair - 4-link spacing
• ✓ 20x10.50x12
• ✓ Weight: Approximately: 7 pounds
• ✓ 23x9.50x12
• ✓ 24x8.50x12

• ✓ Powder-coated hardened steel cutting edge stands up to the toughest conditions
• ✓ Easy installation
• ✓ No warranty - wear item
• ✓ Can be reversed to gain longer wear life

• Returnable: 30-Day
• Product Width (in.): 50

• ✓ Item assembled measures 6 in L x 6 in W x 10 in H
• ✓ The shear bolts and nuts are specifically made for Ariens compact and Sno-Tek models
• ✓ Snow jet is an aerosol spray that helps prevent snow from sticking to the metal housing, impeller, and auger
• ✓ Ariens fuel stabilizer keeps fuel fresh for up to 1 yr and helps prevent carburetor varnish caused by ethanol fuel
• ✓ Ariens Sno-Thro Maintenance Kit for compact and Sno-Tek models include an assortment of items to perform routine maintenance on your compatible snow blower
• ✓ For use on compact Sno-Thro's and Sno-Tek snow blowers to keep them in top running condition

• ✓ This product cannot be shipped to: CA
• ✓ One pair - 2-link spacing
• ✓ Fits tire sizes 4.8x12, 4x4.80x8

• ✓ For use with Ariens Sno-Thro engines
• ✓ Ariens OEM recommended

• Product Depth (in.): 12
• Fits Models: Ariens Sno-Thro's with 120V Electric Start
• Fits Brands: Ariens
• Manufacturer Warranty: 30 Days

• ✓ Includes one 20 in replacement belt
• ✓ This product cannot be shipped to: CA
• ✓ Tested under rigorous operation conditions
• ✓ For use on Ariens compact 20 in Sno-Thro and Sno-Tek models
• ✓ Ariens Replacement Impeller Belt has been designed and tested with exacting standards to keep your snow blower in top running condition
• ✓ Genuine Ariens OEM parts are designed to handle the same exacting standards used on Ariens OEM equipment

• ✓ Also can be used to remove snow from Auger housing
• ✓ Genuine factory part
• ✓ Black in color
• ✓ Replaces O.E. # 931-2643

• Manufacturer Warranty: None
• Part/Accessory Type: Clean-Out Tool

• ✓ Easy snap-out, snap-in change procedure allows you to make the headlight assembly exchange with ease
• ✓ with this headlight assembly, removing snow is both safer and easier no matter what the lighting conditions
• ✓ Complete replacement assembly includes everything you need to easily and suCCessfully replace the headlight on your Stanley or Beast snow blower

• Part/Accessory Type: Light
• Manufacturer Warranty: All sales are final.
• Returnable: 30-Day

• ✓ This product cannot be shipped to: CA
• ✓ 6.4 lbs.
• ✓ Slot is 3/16 in. W x 1/4 in. deep
• ✓ Slotted shaft end

• ✓ Electrically powered with one-button in-cab controller makes it safer and easier to plow snow than ever before
• ✓ Integrated caster wheels allow the user to effortlessly remove the plow in less than a minute and then maneuver the plow for storage when not in use

• Snow Equipment Product Type: Vehicle Snow Plow
• Used With Equipment Type: Car
• Product Width (in.): 80
• Returnable: 30-Day

• ✓ 1 in. steel post with washers & zinc lynch pin
• ✓ 6 in. base
• ✓ Weight: Approximately: 7.74 pounds
• ✓ Replacement snow plow part
• ✓ Replaces Western 49067

• ✓ Shipping Dimensions: Approximately 4.88 x 4.13 x 1 inches.
• ✓ Weight: Approximately: .45 pounds
• ✓ This product cannot be shipped to: CA
• ✓ Complete kit fits Meyers E-47/E-60 hydraulic units

8

• ✓ Designed for use with 82 in., 84 in. and 88 in. DK2 snow plows
• ✓ All installation hardware and instructions included
• ✓ Custom designed mounts fit most trucks and SUV's

• Fits Brands: Nissan
• Product Height (in.): 8
• Product Depth (in.): 8

• ✓ Helps keep your snowblower operating efficiently over time
• ✓ Includes 1 replacement scraper (part # 75-8780)
• ✓ All necessary replacement hardware included
• ✓ Compatible with Toro Powerlite and CCR Powerlite Snowblowers

• Returnable: 90-Day
• Manufacturer Warranty: 1-year for residential use

• ✓ Mount can stay fastened to vehicle year round not just in plowing season
• ✓ Designed for use with 82 in., 84 in. and 88 in. DK2 snow plows
• ✓ Specially designed to bolt into existing holes in the vehicle frame requiring no drilling or welding

• Product Depth (in.): 8
• Product Width (in.): 24
• Manufacturer Warranty: 1 Year Limited

• ✓ Please consult the custom mount guide to determine the correct mount kit number to order
• ✓ Specially designed to bolt into existing holes in the vehicle frame requiring no drilling or welding
• ✓ Custom designed mounts fit most trucks and SUV's

• Product Depth (in.): 8
• Product Width (in.): 24
• Fits Brands: Chevrolet;GMC Canyon

• ✓ 2-stage design for heavy weight snow and larger jobs
• ✓ Steel chute and deflector system with wide opening for optimum snow flow

• Refurbished: No
• Ideal Snow Depth (In.): 27
• Chute Turning Radius (Degrees): 180
• Auger Material: Steel