Agiseek home

Snow Removal Parts Accessories Snow Removal Equipment For Sale In Idaho

Become a Partner
Steel Skid Shoes for Ariens Snow Blowers (2-Pack)
Prices start at : 24.98 USD / each

Includes two shoes and mounting hardware. They are an OEM replacement for rusted or worn shoes. The Ariens Steel Skid Shoes for Ariens snow blowers help prevent wear and tear of the auger and auger housing.
  •  Includes 2 skid shoes and mounting hardware
  •  Shoes are adjustable for different clearing heights
  •  Designed to fit Ariens compact, deluxe and professional series Sno-Thro models
  • Product Width (in.): 6 in
  • Manufacturer Warranty: 30 Days
  • Product Depth (in.): 10.25 in
United States
Idaho
Universal Slide Shoe Set
Prices start at : 29.98 USD / each

Made of a high-strength polymer, the Arnold Universal Slide Shoe Set is designed to protect driveways, walkways, garages and porches from scratches created by traditional slide shoes.
  •  Non-abrasive material helps prevent scratches
  •  High-strength polymer material resists rust
  • Returnable: 90-Day
  • Fits Brands: Universal
  • Product Height (in.): 1.75
  • Fits Models: Fits most two-stage snow throwers
United States
Idaho
6 ft. x 8 in. Replacement Urethane Cutting Edge
Prices start at : 308.99 USD / each

Includes all mounting hardware. Pre-drilled, ready for installation. Home Plow Urethane Cutting Edge Provides the rigidity of steel edges, and the noise reduction of rubber edges, while protecting sensitive surfaces.
  • OEM Original part: Yes
  • Fits Models: 24000, 25000, 26000
  • Fits Brands: Home Plow by Meyer
  • Product Width (in.): 96
  • Product Depth (in.): 1
  • Part/Accessory Type: Drift Cutter
United States
Idaho
Snow Plow Solenoid Type A 3/8 In. Stem - 1306015
Prices start at : 79.99 USD

Solenoids are the devices which convert energy into motion, getting your snow plow moving.
  •  This item is a type A solenoid coil and valve 3/8 In. stem for use with your Meyer or Diamond snowplows
  •  Shipping Dimensions: Approximately 5.5 x 4.75 x 1.38 inches.
  •  This product cannot be shipped to: CA
United States
Idaho
Snow Plow Switch Angle E-47 - 1306075
Prices start at : 13.95 USD

  •  Shipping Dimensions: Approximately 4.88 x 4.13 x 1 inches.
  •  Aftermarket Meyer angle toggle switch for E47 power pack
  •  This product cannot be shipped to: CA
United States
Idaho
Snow Blower/Garden Tractor Tire Chains - 1061756
Prices start at : 31.79 USD

  •  One pair - 2-link spacing
  •  Fits tire sizes 14x5.50x5, 15x5x6, 15x6x6
  •  Weight: Approximately: 7 pounds
United States
Idaho
Trip Spring - Western
Prices start at : 13.99 USD

The online sale was seamless. Thanks for offering this option.
  •  Trip springs for Western plow
  •  Replaces Western 23039
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 15 x 2.25 x 2.25 inches.
United States
Idaho
Quick Coupler
Prices start at : 13.99 USD

  •  This product cannot be shipped to: CA
  •  Made in the USA
  •  Replacement snow plow part
  •  Shipping Dimensions: Approximately 6.25 x 2.5 x 1 inches.
United States
Idaho
Shoe Assembly - Meyer
Prices start at : 24.99 USD

  •  Weight: Approximately: 10 pounds
  •  Thick cast runner with black powder-coat finish
  •  This product cannot be shipped to: CA
  •  Replacement snow plow parts
  •  3 in. x 8-1/4 in. x 11/16 in.
United States
Idaho
Clean-Out Spaded Tool for Snow Blower
Prices start at : 21.00 USD / each

Includes a contoured handle that offers a firm, secure grip even with gloves on. If there is built-up snow and ice on the discharge chute and impeller of your Ariens Sno-Thro, the Clean-Out Spaded Tool is the perfect accessory to help remove it.
  •  Durable design is constructed of polymer for a lasting use
  •  Mounting bracket included for installation
  •  Made of durable polymer
  •  Safety tool to remove ice and snow from discharge chute and impeller
  •  Versatile design doubles as both a scraper and shovel
  • Fits Brands: Ariens
United States
Idaho
Replacement Drive Belt for Sno-Tek Compact Self-Propelled Snow Blowers
Prices start at : 10.99 USD

  •  Belt fits Ariens Compact 22 in and 24 in snow blowers
  •  Ariens 40-3/4 in snow blower replacement drive belt is an OEM part for Ariens Compact and Sno-Tek 24 in and 28 in snow blowers
  •  Shipping Dimensions: Approximately 15.25 x .5 x .25 inches.
  •  Replacement drive belt connects snow blower engine to the wheels
  •  Item assembled measures 17.75 in x 4.75 in W x 0.63 in H
  •  This product cannot be shipped to: CA
United States
Idaho
6 ft. 8 in. Deflector Kit
Prices start at : 129.99 USD / each

Home Plow Deflector Kit made from pliable poly the Home Plow by Meyer deflector kit keeps snow plumes down and away from your vehcile windshield. The Home Plow by Meyer moldboard is pre-drilled and everything to need to mount the Home Plow by Meyer deflector...
  •  Poly construction
  •  80 in. W x 10 in. H
  • Returnable: 30-Day
  • Fits Models: 24000, 25000, 26000
  • Fits Brands: Home Plow by Meyer
  • Product Depth (in.): 1
United States
Idaho
Snow Plow Connecting Pin - 1302330
Prices start at : 11.99 USD

  •  Shipping Dimensions: Approximately 8 x 5.5 x 1.25 inches.
  •  Used to attach older style plow frame of truck
  •  Weight: Approximately: 1.8 pounds
  •  This product cannot be shipped to: CA
  •  7-1/8 In.
United States
Idaho
Deluxe Drive Belt for 2-Stage Snow Blower
Prices start at : 11.99 USD

  •  Offers a direct replacement for old and worn drive belts
  •  Includes one 16 in replacement belt
  •  Perfectly fits and is compatible with deluxe snow blower models 921005, 921006, and 926027
  •  Rugged and durable design to handle high horsepower
  •  Weight: Approximately: .5 pounds
  •  This product cannot be shipped to: CA
United States
Idaho
30 in. x 36 in. Heavy Duty Floor Protective Mat
Prices start at : 34.95 USD / each

It is made out of textured recycled materials and has a raised edge to keep melting snow contained. You can store your snow blower with peace of mind knowing that this durable rubber mat is under your equipment.
  •  Constructed from recycled materials
  •  Rinse with water to clean
  • Product Height (in.): 1 in
  • Product Depth (in.): 36
  • Product Width (in.): 30
  • Fits Brands: Ariens
United States
Idaho
Snow Shovel Replacement Belt for 324E Snow Shovel
Prices start at : 9.92 USD / each

This Snow Joe belt is designed specifically for your Snow Joe snow shovel. Since your snow blower belt can wear or break, it is essential to replace when it begins to show wear. Your snow blower belt must be in good condition for it to run efficiently.
  •  Ribbed design
  •  Includes 1 replacement belt
  •  Fits 324E electric snow shovel
  • Returnable: 90-Day
  • Part/Accessory Type: Drive Belt
United States
Idaho
Shoe Assembly - Western
Prices start at : 19.95 USD

However, I mis measured and ordered the wrong size because of a bit of confusion with the catalog. The product presents as a quality product. Very well designed and built. I will try to reorder the correct size at a later time.
  •  Shipping Dimensions: Approximately 8.25 x 6 x 6 inches.
  •  This product cannot be shipped to: CA
  •  Replacement snow plow part
  •  1 in. steel post with washers & zinc lynch pin
  •  6 in. base
United States
Idaho
2-Cycle Oil for Air Cooled Engines 50-1 - 2.6 Oz.
Prices start at : 0.99 USD

  •  Meets API TC specification
  •  Recommended for chain saws, lawn mowers, string trimmers, leaf blowers, snow throwers, ice augers, portable pumps, generators, motorcycles, mopeds, scooters, ATV's, golf carts plus many other 2-cycle engines
  •  50-1 Gas - Oil Ratio
  •  Weight: Approximately: .56 pounds
United States
Idaho
Shear Pins 1-3/4 in.
Prices start at : 5.98 USD / each

(four-pack) Shear Pins are for MTD 900 Series 2-Stage Snow Blowers. The MTD Genuine Factory Parts 1/4 in. They will help prevent damage when the impeller comes in contact with solid objects.
  •  Use to help protect snow blowers from damage when the impeller comes in contact with a solid object
  •  Quick installation
  • Fits Models: MTD 900 series two-stage snow throwers, 2007 and after
  • Fits Brands: Arnold
  • Returnable: 90-Day
  • Product Width (in.): 2.75
United States
Idaho
Replacement Spring Kit for 84 in. Snow Plow
Prices start at : 59.99 USD / each

SNOWBEAR Snowplows come loaded with features to make the job much easier. Spring Kit is the ideal accessory for your SNOWBEAR Snow Plow. We strive to create products with innovative features that make our customer's recreational and outdoor working lifestyles...
  •  Replace stretched and worn springs to keep trip feature of blade working correctly
  •  For 84 in. SNOWBEAR plow
  •  Includes locking bolt
  •  Includes pair of springs
  • Returnable: 90-Day
  • Product Depth (in.): 4
United States
Idaho
7 ft. 6 in. Replacement Steel Cutting Edge
Prices start at : 129.00 USD / each

When the need arises to replace your exisiting cutting edge, the replacement steel cutting edge for the Home Plow by Meyer makes the task quick and easy. The custom designed cutting edge is specially designed to allow for maximum snow clearing performance.
  •  Powder-coated hardened steel cutting edge stands up to the toughest conditions
  •  Complete kits including attaching hardware and edge
  • Fits Models: 26500
  • Part/Accessory Type: Drift Cutter
  • Product Width (in.): 0.375
  • Product Depth (in.): 90
United States
Idaho
Snow Thrower Impeller Belt
Prices start at : 9.99 USD

  •  Replace old and worn snow thrower belts with Poulan Pro Snow Thrower Impeller Belts
  •  Easily installs on your snow thrower
  •  Engineered to meet the stringent demands of snow throwers in harsh winters
  •  This product cannot be shipped to: CA
  •  Fits all Poulan Pro snow throwers
United States
Idaho
2-Cycle Motor Oil for Air Cooled Engines - 1 Qt.
Prices start at : 4.99 USD

  •  Weight: Approximately: 2 pounds
  •  Meets API TC specification
  •  Shipping Dimensions: Approximately 9 x 4.25 x 2.25 inches.
  •  View stripe for easy Mixing
United States
Idaho
Avalanche Series 82 in. x 19 in. Universal Mount Snow Plow for Trucks and SUVs
Prices start at : 1699.00 USD / each

Wireless electric winch. The DK2 Avalanche Snow Plow allows you to quickly and effectively remove snow from your driveway or small parking lot. The Avalanche simply slides into a 2 in.
  •  Features Universal Mount System
  •  Ships in a single carton on a standard size pallet
  •  Powder coated all-steel construction with UV protected paint
  • Product Weight (lb.): 265lb
  • Manufacturer Warranty: 1 Year Limited
  • Returnable: 30-Day
United States
Idaho
80 in. x 22 in. Residential Snow Plow with Patented Auto Angle Feature
Prices start at : 2599.00 USD / each

Front receiver hitch (receiver hitch sold separately). The Home Plow comes completely assembled and includes a one-button controller for easy, in-cab operation. The Home Plow by Meyer Hydraulically-Powered snow plow is perfect for clearing long driveways...
  •  Mounts using a class 3, 2 in. front receiver hitch-sold separately
  •  Hydraulically-powered with one-button in-cab controller makes it safer and easier to plow snow than ever before
  •  1-year warranty
  •  Compatible with most of today's leading utility vehicles (UTV's) requires 2 in. front receiver hitch
  • Manufacturer Warranty: 1 Year
  • Product Depth (in.): 42
United States
Idaho
Clean-Out Tool with Brush for Snow Blower
Prices start at : 24.95 USD / each

A contoured handle allows for a comfortable, secure grip as you work. The Ariens Clean-Out Tool cleans snow and ice from the discharge chute and impeller of your Ariens Sno-Thro. Its versatile design repurposes as a combined brush, scraper and shovel...
  •  Long reach and durable construction keep hands away while cleaning the most tightly packed snow
  •  Can be mounted to most other manufacturers' snow blowers as an enhancement
  •  Contoured handle prevents hands from losing their grip even in gloves or mittens
  • Part/Accessory Type: Clean-Out Tool
  • Manufacturer Warranty: 30 Days
  • Returnable: 30-Day
United States
Idaho
Snow Plow Custom Mount for Chevy Silverado and Sierra 2003-2004
Prices start at : 252.46 USD / each

Please note that some mounting kits can fit multiple vehicle makes and models. Tips for new snow plow owners are incorporated into our DK2 Snow Plow Owner's Manual. Included in your mount kit are left hand and right hand bolt-on mount brackets, the cross...
  •  Please consult the custom mount guide to determine the correct mount kit number to order
  •  Custom designed mounts fit most trucks and SUV's
  •  Designed for the rampage II, storm II or summit II snow plows
  •  Specially designed to bolt into existing holes in the vehicle frame requiring no drilling or welding
  • Product Height (in.): 8
  • Fits Brands: Chevrolet;Cadillac Escalade;GMC Sierra;GMC Yukon
United States
Idaho