Agiseek home

Snow Removal Parts Accessories Snow Removal Equipment For Sale In Cleveland

Become a Partner
Path Pro Skid Shoe Kit
Prices start at : 59.99 USD / each

It is common for the edge to run 1/2 in. Shoes come per each quantity 1 and include all mounting hardware for easy installation. In addition, the mushroom design is convenient for back-dragging applications.
  •  Mushroom shoe design rotates 360 to eliminate catching unwanted objects
  •  Fits the path pro model 29000 and model 29100 ATV plows
  •  1 year limited warranty
  • Returnable: 30-Day
  • Product Height (in.): 7.69
  • Product Depth (in.): 3
Ohio
Cleveland
Drift Cutters for Snow Blower
Prices start at : 34.02 USD / pair

Simple to install, these drift cutters will help your Beast or Stanley snow blower operate at peak efficiency and help you remove the snow blocking your safe passage more quickly and more completely.
  •  Cut into snow drifts and direct snow into the snow blower for more complete removal
  •  Help push away snow too high to enter the auger housing
  •  Easily installed on either side of the auger
  • Fits Models: 30SBM16, 36SBM16, 45SBM16, 30SDM16, 36SDM16, 45SDM16
  • Manufacturer Warranty: All sales are final.
  • Part/Accessory Type: Drift Cutter
Ohio
Cleveland
Shear Bolt Kit
Prices start at : 4.69 USD

  •  Shear bolt kit connects the auger to the rotating drive shaft and when it hits a foreign object or packed snow the bolt will shear or break protecting your transmission and motor from damage
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 6.5 x 2.75 x 1.5 inches.
  •  Constructed of a soft metal material so it will purposely shear or break when required
  •  Protects your snow blower from damage when the impeller comes into contact with a solid object
  •  Item measures 6.75 in L x 2.75 in W x 1.5 in H
Ohio
Cleveland
Trip Spring - Meyer
Prices start at : 13.99 USD

  •  Replaces Meyer 07017
  •  Replacement snow plow part
  •  Made in the USA
  •  Weight: Approximately: 6 pounds
Ohio
Cleveland
Replacement Snow Blower Center Paddle Kit for SnowMaster Models
Prices start at : 26.99 USD / each

This Paddle and Hardware kit helps ensure optimum performance on your Toro SnowMaster. Over time, if skid shoes or scrapers are not replaced as needed on your SnowMaster your snowblower paddles could contact asphalt or concrete and will wear down and...
  •  Kit contains 2 paddles, 6 screws and nut locks needed for complete replacement
  •  For use with all Toro SnowMaster models
  • Returnable: 90-Day
  • Fits Models: 36001, 36002 and 36003
  • Part/Accessory Type: Snow Plow Kit
Ohio
Cleveland
Compact Drift Cutters for Compact Sno-Thro Snow Blowers
Prices start at : 29.3 USD / pair

Chop through heavy snow drifts with the Ariens Compact Drift Cutters made for Sno-Thro Snow Blowers. The cutters rotate down for regular use and go into the auger housing to discharge snow quickly.
  •  5 in. W x 5 in. H x 25 in. D
  •  Rotate the drift cutter's bars down and out of the way for regular use
  •  Allows you to easily tackle heavy snow drifts
  •  Directs heavy snow drifts into your snow blower's auger housing (not included) to discharge quickly
  • Fits Brands: Ariens
  • Returnable: 30-Day
Ohio
Cleveland
New Style 1306325 Snow Plow Motor 4-1/2 In.
Prices start at : 129.95 USD

  •  12 volts
  •  Shipping Dimensions: Approximately 10 x 6.75 x 5.5 inches.
  •  Weight: Approximately: 19.5 pounds
  •  This product cannot be shipped to: CA
Ohio
Cleveland
84 in. Deflector Kit
Prices start at : 116.00 USD / each

We strive to create products with innovative features that make our customer's recreational and outdoor working lifestyles easier. Is the leading North American manufacturer of personal and light commercial snowplows and related accessories.
  •  Will help prevent salt and road debris from damaging vehicle grill and /or hood
  •  Includes: 84 in. rubber deflector, mounting bar and hardware
  •  Made of rugged material for long lasting usage
  •  Snow deflector reduces spray and increases visibility
  • Returnable: 90-Day
  • Fits Models: 84 in. SNOWBEAR snowplows
Ohio
Cleveland
Blade Guide Kit - Red
Prices start at : 12.69 USD

  •  Made in the USA
  •  Weight: Approximately: 1.2 pounds
  •  27 inches tall
  •  One pair red guides
  •  Replacement snow plow parts
Ohio
Cleveland
Snow Blower/Garden Tractor Tire Chains - 1063055
Prices start at : 36.99 USD

  •  21x10.50x12
  •  23x9.50x12
  •  20x10.50x12
  •  21x11x8
  •  Shipping Dimensions: Approximately 7 x 5 x 5 inches.
  •  24x8.50x12
Ohio
Cleveland
Heavy Duty Cast Iron Skid Shoes for Toro 2-Stage Snow Blowers
Prices start at : 40.48 USD / each

The skids are reversible for double the life. Toro's Cast Iron Skid Shoes are extra wide providing for maximum life and durability. The kit contains 2 skids and the hardware necessary to complete the installation task.
  •  All necessary hardware for replacement included
  •  Made of heavy cast iron for maximum life
  • Manufacturer Warranty: 1-year
  • Part/Accessory Type: Skid Shoe/Mat
  • Product Width (in.): 6
  • Fits Models: Toro Power Max and Power Max HD snowblowers (models 2013 and later)
Ohio
Cleveland
High Pressure Hose
Prices start at : 12.95 USD

  •  Shipping Dimensions: Approximately 12 x 9 x 1 inches.
  •  1/4 in. x 38 in. angle cylinder hose
  •  Made in the USA
  •  Weight: Approximately: .34 pounds
Ohio
Cleveland
Deluxe Arched Snow Blower Cab
Prices start at : 79.99 USD / each

Of interior room, the cab is lightweight and easy to install/assemble. High visibility reflective piping allows the cab to be seen while working in low light conditions. The deluxe arched snow blower cab is roomy, rugged, and protects against the worst...
  •  Modular clamping system provides a variety of mounting options and securely holds cab in place
  •  Freeze-resistant, super-clear vinyl windows
  • Part/Accessory Type: Enclosure
  • Product Depth (in.): 31.9
  • Number of sides: 3
  • Storage pockets: No
Ohio
Cleveland
Snowblower Wire Lock Fastener
Prices start at : 12.95 USD

  •  Shipping Dimensions: Approximately 3.456 x 1 x 1 inches.
  •  Weight: Approximately: .08 pounds
  •  Made in the USA
  •  Side chain fastener
  •  Mfr. item number - 2032030
Ohio
Cleveland
Pro Series Heavy Duty Snow Blower Skid Shoes Fits 2 in. and 4 3/4 in. Slot Spacing (Set of 2)
Prices start at : 59.99 USD / each

Note that due to size of skid there may be clearance issues with other bolts or protrusions on the snow blower. Made with American Steel. Long, and are CNC cut from 1/2 in. For every bump the skid encounters, it has more than twice the distance to lift...
  •  Original wide-tip design gives maximum float over gravel and grass
  •  Made from 1/2 in. T plate steel (bottom runner)
  •  1/2 inch thick steel bottom runner for longer life
  •  New narrow-tip design penetrates snow and ice and lets you get down to the pavement
  • Returnable: 90-Day
  • Product Height (in.): 3.5
Ohio
Cleveland
Snow Plow Switch Angle E-47 - 1306075
Prices start at : 13.95 USD

  •  Aftermarket Meyer angle toggle switch for E47 power pack
  •  Weight: Approximately: .1 pounds
  •  Note - For raise toggle switch use part #M21919
Ohio
Cleveland
Shoe Assembly - Western
Prices start at : 19.95 USD

However, I mis measured and ordered the wrong size because of a bit of confusion with the catalog. The product presents as a quality product. I will try to reorder the correct size at a later time.
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 8.25 x 6 x 6 inches.
  •  1 in. steel post with washers & zinc lynch pin
  •  Replacement snow plow part
  •  Black powder-coated cast shoe
Ohio
Cleveland
Motor
Prices start at : 159.95 USD

  •  Weight: Approximately: 14.8 pounds
  •  Replacement snow plow part
  •  This product cannot be shipped to: CA
  •  Replaces Meyer 15841/15727
Ohio
Cleveland
Shave Plate for Single-Stage Snow Throwers
Prices start at : 23.39 USD / each

The only way to ensure the best performance of your power equipment is to use genuine parts, accessories and attachments. We design and engineer these quality parts to exacting standards to provide reliability, safety and top performance.
  •  To adjust shave plate tip the snow thrower back so that it rests on the handle, loosen the 4 lock nuts and bolts which secure the shave plate to the housing, move the shave plate to the desired position and retighten the nuts and bolts securely
  •  Replaces original manufacturer equipment parts starting with 931-08171*(_) / 731-08171(_)
  •  Scrapes snow off pathway and driveway
  •  Fits MTD branded single-stage snow throwers
  • Returnable: 90-Day
  • Product Depth (in.): 23.5
Ohio
Cleveland
Non Abrasive Skid Shoe
Prices start at : 34.98 USD / box

Constructed of durable polyurethane material. The Ariens Non-Abrasive Skid Shoes resist wear while providing protection from scratching and marring of decorative surfaces.
  •  Product is 8.25 in. x 1.5 in. x 6.13 in.
  •  Fits all Ariens snow blowers
  •  Skid shoes are reversible for longer wear life
  •  Contains 2 skid shoes, 1 for each side of the snow blower
  • Returnable: 90-Day
  • Product Depth (in.): 8.25 in
Ohio
Cleveland
Deluxe Drive Belt for 2-Stage Snow Blower
Prices start at : 11.99 USD

  •  Model # 70706500
  •  Perfectly fits and is compatible with deluxe snow blower models 921005, 921006, and 926027
  •  Rugged and durable design to handle high horsepower
  •  Ariens' 28 in Deluxe Drive Belt is an important piece of equipment keeping your snow blower running in top condition
  •  Item assembled measures 16 in L x 4 in W x 0.63 in H
  •  Offers a direct replacement for old and worn drive belts
Ohio
Cleveland
Snow Thrower Slide Shoes - 2 Pk
Prices start at : 7.49 USD

Material also good as original. Perfect fit the same as original.
  •  Model # OEM-784-5580
  •  Weight: Approximately: 1.47 pounds
  •  Includes 2 slide shoes
  •  This product cannot be shipped to: CA
Ohio
Cleveland
Universal Snow Blower Key Set
Prices start at : 6.95 USD

  •  Arnold is well known for premium quality replacement parts for lawn and garden equipment
  •  Indak key fits most key-turn ignition system snow engines
  •  Keys fit many MTD, Briggs & Stratton, Craftsman, and Tecumseh snow blower models
  •  Weight: Approximately: .05 pounds
  •  Key marked 'B' is compatible with Briggs & Stratton snow engines
  •  Item assembled measures 6.75 in L x 2.75 in W x 1.25 in H
Ohio
Cleveland
Hitch Pin with Cotter
Prices start at : 4.99 USD

  •  Replaces Western 93028
  •  Weight: Approximately: 1.5 pounds
  •  Replacement snow plow parts
  •  This product cannot be shipped to: CA
Ohio
Cleveland
Snow Plow Solenoid Type A 3/8 In. Stem - 1306015
Prices start at : 79.99 USD

Solenoids are the devices which convert energy into motion, getting your snow plow moving.
  •  Weight: Approximately: .44 pounds
  •  Shipping Dimensions: Approximately 5.5 x 4.75 x 1.38 inches.
  •  This item is a type A solenoid coil and valve 3/8 In. stem for use with your Meyer or Diamond snowplows
Ohio
Cleveland
Snow Plow Coil Type A 5/8 In. Hole - 1306025
Prices start at : 32.95 USD

  •  1.50 x 4.10 x 5 inches
  •  0.28 lbs.
  •  Weight: Approximately: .48 pounds
  •  Shipping Dimensions: Approximately 4.88 x 4.13 x 1.38 inches.
Ohio
Cleveland
Snow Blower Cold Weather Cab
Prices start at : 187.00 USD / each

Versatile Honda walk behind 2 stage snow blower cab kit. The cab protects you from the blowing, swirling snow and sleet while performing snow removal. This nylon reinforced, rip stop vinyl material enclosure will protect you from the weather.
  •  Fits Honda HS624, HS724, HS828, HS928, HS928K1,
  •  Cold weather cab frame is constructed of 16-Gauge 3/4 in. steel tube construction
  •  HS1132 and HS1332 snow blowers
  • Product Depth (in.): 20.5
  • Product Width (in.): 25.5
  • Fits Brands: HONDA
Ohio
Cleveland