Agiseek home

Snow Removal Parts Accessories Snow Removal Equipment For Sale In Bakersfield

Become a Partner
Snow Blower Skid Height
Prices start at : 13.99 USD

  •  Model # 322288MA
  •  Item assembled measures 8.25 in L x 5 in W x 1.75 in H
  •  This product cannot be shipped to: CA
  •  Includes 2 plates
California
Bakersfield
Snow Shovel Replacement Belt for 324E Snow Shovel
Prices start at : 9.92 USD / each

Your snow blower belt must be in good condition for it to run efficiently. This Snow Joe belt is designed specifically for your Snow Joe snow shovel. Since your snow blower belt can wear or break, it is essential to replace when it begins to show wear.
  •  Snow Joe product
  •  Ribbed design
  • Fits Brands: Snow Joe
  • Returnable: 90-Day
  • Part/Accessory Type: Drive Belt
California
Bakersfield
Snow Thrower Impeller Belt
Prices start at : 9.99 USD

  •  Shipping Dimensions: Approximately 16 x 4 x 1 inches.
  •  Fits all Poulan Pro snow throwers
  •  Easily installs on your snow thrower
  •  Weight: Approximately: .41 pounds
  •  Item measures 16 in L x 4 in W x 1 in H
California
Bakersfield
120-Volt Electric Start Power Cord
Prices start at : 14.95 USD / each

Designed for use with outdoor appliances. This 120-Volt Electric Start Power Cord can be used with Ariens Sno-Thro engines with 120-Volt starters. It measures 10 ft. Long which offers an extended, hassle-free use your Sno-Thro engine.
  • Manufacturer Warranty: 30 Days
  • Suitable for use with outdoor appliances: Yes
  • Product Width (in.): 9.5
  • Returnable: 90-Day
  • Fits Brands: Ariens
  • Product Depth (in.): 12
California
Bakersfield
Replacement Spring Kit for 60 in., 72 in. and 82 in. Snow Plows
Prices start at : 59.99 USD / each

Is the leading North American manufacturer of personal and light commercial snowplows and related accessories. SNOWBEAR Plows Inc. This SNOWBEAR Spring Kit is the ideal accessory for 60 in., 72 in.
  •  For 60 in., 72 in. and 82 in. SNOWBEAR plows
  •  Snow plow fits most trucks and full size SUV's
  •  Includes pair of springs
  •  Snow deflector reduces spray and increases visibility
  •  Includes locking bolt
  • Product Width (in.): 5
California
Bakersfield
6 ft. x 8 in. Replacement Rubber Cutting Edge
Prices start at : 234.59 USD / each

Home Plow Rubber Cutting Edge helps eliminate noise and potential surface damage when plowing a surface. Kits includes all mounting hardware. Reversible to extend life and pre-drilled for easy installation.
  • Product Depth (in.): 6
  • 1 in. Thick edge-helps to reduce noise when plowing: Yes
  • Product Height (in.): 1
  • Fits Brands: Home Plow by Meyer
  • Manufacturer Warranty: No Warranty--wear item
  • Fits Models: 24000, 25000, 26000
California
Bakersfield
Snow Thrower Traction Belt
Prices start at : 9.99 USD

  •  Shipping Dimensions: Approximately 14.5 x 4 x 1 inches.
  •  Engineered to meet the stringent demands of snow throwers in harsh winters
  •  This product cannot be shipped to: CA
  •  Replace old and worn snow thrower belts with Poulan Pro Snow Thrower Impeller Belts
  •  Easily installs on your snow thrower
California
Bakersfield
Shear Bolts
Prices start at : 4.98 USD / each

The MTD Genuine Factory Parts Snow Blower Shear Bolts are designed to protect your snow blower from damage when the impeller comes into contact with a solid object. These shear bolts fit MTD 2-stage snow blower models manufactured in 2004 and prior (except...
  •  Protects snow blowers from damage
  •  Replaces shear bolts for model 710-0890
  • Manufacturer Warranty: None
  • Product Width (in.): 2.75
  • Fits Brands: Arnold
  • Fits Models: Two-stage snow thrower models, 2004 and prior (except 33" model E993I)
California
Bakersfield
Black Universal Snow Blower Cab
Prices start at : 79.99 USD

  •  Weather-X fabric won't shrink or stretch and resists both water and snow
  •  Rugged and powder-coated steel tube frame
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 25.2 x 7.5 x 6.5 inches.
  •  Quick and easy to assemble with its lightweight design
  •  Item assembled measures 3.5 in L x 7.5 in W x 25.2 in H
California
Bakersfield
Rear Work Light Kit (Halogen Bulb) for the Meyer BL 240/BL 400
Prices start at : 124.43 USD / each

Halogen light plugs into standard trailer hitch power cord. The Meyer Rear Halogen Work and LED Brake Light kit conveniently mounts to any rear location and brightens up the rear of the truck during spreading or maintenance operations.
  •  Works with the Home Plow by Meyer
  •  OEM Original equipment
  • Product Width (in.): 13
  • Product Depth (in.): 8
  • Returnable: 90-Day
  • Product Height (in.): 5
California
Bakersfield
88 in. Poly Scraper Kit
Prices start at : 174.00 USD / each

SNOWBEAR Plows Inc. We pride ourselves on the quality of our products, as well as the superior service and support we provide to our customers. We strive to create products with innovative features that make our customer's recreational and outdoor working...
  •  Double use poly scraper bar allows you to plow delicate and expensive surfaces such as stamped concrete, natural stone or new asphalt laneways or lots without fear of damage or scars sometimes associated with metal scrapers
  •  For use on 88 in. SNOWBEAR snowplows
  •  Reversible blade for 2nd usage once the first blade is worn
  •  Measures 88 in. wide by 19 in. high
  • Fits Brands: SNOWBEAR
  • Returnable: 90-Day
California
Bakersfield
Rivet
Prices start at : 4.49 USD

  •  Replacement snow plow part
  •  This product cannot be shipped to: CA
  •  Made in the USA
  •  3/4 in. x 4 in.
California
Bakersfield
Replacement Spring Kit for 84 in. Snow Plow
Prices start at : 59.99 USD / each

SNOWBEAR Plows Inc. We pride ourselves on the quality of our products, as well as the superior service and support we provide to our customers. We strive to create products with innovative features that make our customer's recreational and outdoor working...
  •  For 84 in. SNOWBEAR plow
  •  Includes pair of springs
  •  Contains 2 springs, 2 eye bolts and 2 lock nut
  • Product Depth (in.): 4
  • Product Width (in.): 6
  • Manufacturer Warranty: 1 Year Limited
California
Bakersfield
Snow Blower/Garden Tractor Tire Chains - 1062055
Prices start at : 29.99 USD

  •  Weight: Approximately: 6.2 pounds
  •  This product cannot be shipped to: CA
  •  Fits tire sizes 16x5.50x8, 16x6.50x8, 5x5.70x8
California
Bakersfield
Snow Blower/Garden Tractor Tire Chains - 1062655
Prices start at : 29.99 USD

I bought these for my Cub Cadet lawn tractor when I push snow with my snow blade paired up with a 70 lb sand tube on the back the traction is great these are the cheapest I found in my area but very good quality I would recommend them.
  •  Fits the following tire sizes
  •  This product cannot be shipped to: CA
  •  20x8x10
  •  One pair - 4-link spacing
  •  20x9x8
  •  Shipping Dimensions: Approximately 7 x 5 x 5 inches.
California
Bakersfield
Shave Plate for Single-Stage Snow Throwers
Prices start at : 23.39 USD / each

The only way to ensure the best performance of your power equipment is to use genuine parts, accessories and attachments. To protect your investment, specify and use only Genuine Parts.
  •  Includes: (4) 710-0134 bolts and (4) 712-04064
  •  Scrapes snow off pathway and driveway
  •  Shave plate is attached to the bottom of the augerhousing and is subject to wear, it should be checkedperiodically, there are 2 wearing edges and the shave plate can be reversed
  •  Snow thrower shave plates are subject to wear and damage, for your safety protection, frequently check all components and replace with original equipment manufacturers (OEM) parts only, use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety
  •  A worn out shave plate allows snow will be left behind
  • Part/Accessory Type: Snow Plow Kit
California
Bakersfield
Replacement Snowplow Blade Guide Kit
Prices start at : 16.95 USD

  •  One pair of guides
  •  22 inches tall
  •  Shipping Dimensions: Approximately 27.38 x 2.63 x .5 inches.
  •  This product cannot be shipped to: CA
  •  Replacement snow plow parts for Fisher plows
California
Bakersfield
7 ft. 6 in. Replacement Rubber Cutting Edge
Prices start at : 229.00 USD / each

Home Plow Rubber Cutting Edge helps eliminate noise and potential surface damage when plowing a surface. Kits includes all mounting hardware. Reversible to extend life and pre-drilled for easy installation.
  • Part/Accessory Type: Drift Cutter
  • Returnable: 30-Day
  • Fits Models: 26500
  • Product Depth (in.): 90
  • Fits Brands: Home Plow by Meyer
  • OEM original part: Yes
California
Bakersfield
Replacement Paddle and Hardware Kit for Power Clear 18 Models
Prices start at : 63.82 USD / each

Genuine Toro Parts are designed specifically for your machine and offer quality, performance and value. This Paddle and Hardware kit helps ensure optimum performance on your Toro Power Clear or Powerlite Snowblower.
  • Fits Brands: Toro
  • Fits Models: Toro Power Clear and Powerlite snowblowers (models 2010 and newer)
  • Part/Accessory Type: Skid Shoe/Mat
  • Manufacturer Warranty: 1-year warranty for residential use
  • For use with Toro power clear and powerlite snowblowers model years 2010 and newer: Yes
California
Bakersfield
Shear Bolt Kit
Prices start at : 4.69 USD

  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 6.5 x 2.75 x 1.5 inches.
  •  1.5 in long shear bolt
  •  Item measures 6.75 in L x 2.75 in W x 1.5 in H
  •  includes 4 shear bolts and 4 hex nuts
  •  Protects your snow blower from damage when the impeller comes into contact with a solid object
California
Bakersfield
Deluxe Sno-Thro Maintenance Kit for Platinum & Professional Models
Prices start at : 24.97 USD

Had everything I needed to get my snowblower ready for Winter!
  •  LE shear bolts are also designed to protect the engine from damage caused by the auger jamming due to ice chunks or other solid objects
  •  To keep your snow blower operating in top condition perform routine maintenance with the Ariens Deluxe Maintenance Kit
  •  This product cannot be shipped to: CA
  •  LE shear bolts are specially designed for Ariens deluxe, platinum, and professional models
  •  Model # 72101300
  •  Ariens Ultra Fresh fuel stabilizer keeps fuel fresh for up to 1 year, especially important when using gas produced with ethanol
California
Bakersfield
Snow Blower/Garden Tractor Tire Chains - 1065556
Prices start at : 36.99 USD

  •  Weight: Approximately: 9.04 pounds
  •  4/0 cross chain for deep lug tires
  •  This product cannot be shipped to: CA
  •  Fits tire sizes 13x5x6, 14x4x6
California
Bakersfield
Heavy Duty Snow Blower Skid Shoes Fits 2 in. and 4 3/4 in. Slot Spacing (Set of 2)
Prices start at : 39.99 USD / each

Note that due to size of skid there may be clearance issues with other bolts or protrusions on the snow blower. Slots are designed to have a slightly loose fit on a 3/8 bolt. Long, and are CNC cut from 1/4 in.
  •  Original wide-tip design gives maximum float over gravel and grass
  •  Lifts snow blower up over cracks and bumps
  •  Set of 2 matching skids
  •  Color: black
  • Manufacturer Warranty: 5 year warranty against bending or breakage.
  • Product Width (in.): 1.12
California
Bakersfield
Hose with Swivel
Prices start at : 14.95 USD

  •  This product cannot be shipped to: CA
  •  Made in the USA
  •  Weight: Approximately: .5 pounds
  •  Replacement snow plow parts
California
Bakersfield
Universal Snow Blower Key Set
Prices start at : 6.95 USD

  •  Item assembled measures 6.75 in L x 2.75 in W x 1.25 in H
  •  Arnold is well known for premium quality replacement parts for lawn and garden equipment
  •  Shipping Dimensions: Approximately 6.75 x 2.75 x 1.25 inches.
  •  Indak key fits most key-turn ignition system snow engines
  •  Keys fit many MTD, Briggs & Stratton, Craftsman, and Tecumseh snow blower models
  •  Key marked 'ST1' is compatible with many MTD and Craftsman snow engines
California
Bakersfield
Replacement Drive Belt for Sno-Tek Compact Self-Propelled Snow Blowers
Prices start at : 10.99 USD

  •  Replacement drive belt connects snow blower engine to the wheels
  •  Belt fits Sno-Tek self propelled 22 in, 24 in, 26 in, and 28 in snow blowers
  •  Includes one 40.75 in replacement belt
  •  This product cannot be shipped to: CA
  •  Rugged and durable design to handle high horsepower
  •  Item assembled measures 17.75 in x 4.75 in W x 0.63 in H
California
Bakersfield
Nylon Sight Rods
Prices start at : 17.95 USD

  •  This product cannot be shipped to: CA
  •  Made of low temp nylon
  •  One pair fluorescent orange rods
  •  3/4 in. diameter with 1/8 in. wall
  •  Made in the USA
California
Bakersfield