Snow Removal Parts Accessories Snow Removal Equipment For Sale In Abilene

• ✓ For plowing over gravel or uneven terrain
• ✓ Quick and easy to install
• ✓ Skid Shoes will increase the life of the scraper blade
• ✓ Includes: 2 steel skid shoes, 2 set of angling plates and hardware

• Manufacturer Warranty: 1 Year Limited
• Product Depth (in.): 4

• ✓ Cold weather cab frame is constructed of 16-Gauge 3/4 in. steel tube construction
• ✓ The cab material is nylon reinforced, rip stop vinyl material

• Fits Brands: HONDA
• Product Height (in.): 46.50
• Product Width (in.): 21.25
• Fits Models: HSS724A, HSS928A and HSS1332A

• ✓ One pair - 2-link spacing
• ✓ 12.25x3.50
• ✓ This product cannot be shipped to: CA
• ✓ 4.1x3.50x8
• ✓ 11x4x4
• ✓ 12x4x6

• ✓ Includes pair of springs
• ✓ Replace stretched and worn springs to keep trip feature of blade working correctly
• ✓ For 88 in. SNOWBEAR plow

• Manufacturer Warranty: 1 Year Limited
• Returnable: 90-Day
• Product Depth (in.): 4

• ✓ Fits tire sizes 16x4.80x8, 4x4.80x8
• ✓ This product cannot be shipped to: CA
• ✓ One pair - 2-link spacing
• ✓ Shipping Dimensions: Approximately 7 x 7 x 5 inches.

• ✓ Help push away snow too high to enter the auger housing
• ✓ Easily installed on either side of the auger
• ✓ Rotate downward, out of the way, when not needed

• Returnable: 30-Day
• Product Width (in.): 2
• Part/Accessory Type: Drift Cutter

• ✓ Pre-drilled for easy installation
• ✓ OEM Orginal part

• Fits Models: 24000, 25000, 26000
• Returnable: 30-Day
• Product Width (in.): 80
• Manufacturer Warranty: No warranty--wear item

• ✓ Assembly of approximately 60 min required
• ✓ If the shear bolt is broken the auger will be unable to turn
• ✓ This product cannot be shipped to: CA
• ✓ For use with Murray 2-stage snow blowers
• ✓ Connect the auger to the rotating drive shaft
• ✓ Includes 4 shear bolts and 4 hex nuts

• ✓ Weight: Approximately: 1.5 pounds
• ✓ Shipping Dimensions: Approximately 8.25 x 6.25 x 1.75 inches.
• ✓ Replaces Western 93028
• ✓ Replacement snow plow parts

• ✓ Weight: Approximately: .7 pounds
• ✓ Replacement snow plow part
• ✓ Ground connection applied to center terminal activates solenoid
• ✓ Shipping Dimensions: Approximately 3.13 x 3.13 x 3 inches.
• ✓ Intermittent duty

• ✓ Includes deflectors, skid shoes and plow marker kit
• ✓ Easily bolts onto existing holes on top of blade
• ✓ For use on 82 in. SNOWBEAR snowplows
• ✓ Includes: 82 in. rubber deflector, mounting bar and hardware

• Fits Models: 82 in. SNOWBEAR snowplows
• Manufacturer Warranty: 1 Year Limited

• ✓ Weight: Approximately: .21 pounds
• ✓ Shipping Dimensions: Approximately 14.5 x 4 x 1 inches.
• ✓ Replace old and worn snow thrower belts with Poulan Pro Snow Thrower Impeller Belts
• ✓ Engineered to meet the stringent demands of snow throwers in harsh winters
• ✓ Item measures 14.5 in L x 4 in W x 1 in H

• Product Height (in.): 6
• Powder-coated hardened steel cutting edge stands up to the toughest conditions: Yes
• Returnable: 30-Day
• Fits Models: 26500
• Product Width (in.): 0.375
• Fits Brands: Home Plow by Meyer

• ✓ Black powder coated finish
• ✓ Offers a ski-like glide over uneven terrain like gravel driveways
• ✓ 1/2 inch thick steel bottom runner for long life

• Product Depth (in.): 12
• Requires Hub?: No Hub Required
• Part/Accessory Type: Skid Shoe/Mat

• ✓ HS1132 and HS1332 snow blowers
• ✓ Adjustable height and position
• ✓ The cab material is nylon reinforced, rip stop vinyl material

• Manufacturer Warranty: 1 year residential and 90 days commercial
• Product Width (in.): 25.5
• Returnable: 90-Day

• ✓ Safely and easily cleans snow and ice from snow blower discharge chutes
• ✓ Can be used to remove snow from chute
• ✓ Keeps operator safe while removing blocked snow
• ✓ Can be used on single and 2-stage snow blowers

Universal

• Fits Brands: Universal
• Fits Models: Universal

• ✓ Non-abrasive material helps prevent scratches
• ✓ Fits most two-stage snow throwers

• Product Width (in.): 3.5
• Part/Accessory Type: Skid Shoe/Mat
• Fits Models: Fits most two-stage snow throwers
• Manufacturer Warranty: None

• ✓ Serves as a combined scraper, brush and shovel
• ✓ Brush feature allows user to clean off snow from outside of the sno-thro after use without damaging finish
• ✓ Helps remove built-up snow and ice from the chute and impeller
• ✓ Durable design is constructed of polymer for a lasting use
• ✓ Comes complete with mounting bracket and hardware for easy installation

• Returnable: 30-Day

• ✓ Size, 2-1/2 In.
• ✓ Shipping Dimensions: Approximately 8.5 x 8 x 5.63 inches.
• ✓ Replacement parts for Western plows
• ✓ Voltage, 12 volt

• ✓ Installation hardware included
• ✓ Product is 8.25 in. x 1.5 in. x 6.13 in.
• ✓ Composite shoes don't leave skid marks on the pavement like metal shoes can do
• ✓ Protects the decorative surfaces outside of your home

• Part/Accessory Type: Skid Shoe/Mat
• Product Depth (in.): 8.25 in

• Poly construction: Yes
• Fits Brands: Path Pro by Meyer
• Product Height (in.): 5
• Manufacturer Warranty: No warranty - wear part
• Returnable: 30-Day
• Product Width (in.): 50

• ✓ Fits tire sizes 13x5x6, 14x4x6
• ✓ One pair - 2-link spacing
• ✓ Weight: Approximately: 9.04 pounds
• ✓ Shipping Dimensions: Approximately 6.75 x 5 x 4.75 inches.

• ✓ Replacement snow plow parts
• ✓ Shipping Dimensions: Approximately 33 x 2.5 x 1 inches to 40 x 2.5 x 1 inches depending on size selected.
• ✓ One pair fluorescent orange rods
• ✓ 3/4 in. diameter with 1/8 in. wall
• ✓ Made of low temp nylon

• Returnable: 30-Day
• Includes 1 replacement scraper (Part # 108-4884): Yes
• Manufacturer Warranty: 1-year warranty for residential use
• Part/Accessory Type: Snow Plow Kit
• Fits Brands: Toro

• Fits Brands: HONDA
• Product Width (in.): 1.0
• Manufacturer Warranty: 1 year residential/90 days commercial.
• For when the snow is higher than the blower housing: Yes
• Product Height (in.): .25
• Product Depth (in.): 21.625

• ✓ Shipping Dimensions: Approximately 15.25 x .5 x .25 inches.
• ✓ Belt fits Sno-Tek self propelled 22 in, 24 in, 26 in, and 28 in snow blowers
• ✓ Belt fits Ariens Compact 22 in and 24 in snow blowers
• ✓ This product cannot be shipped to: CA
• ✓ Includes one 40.75 in replacement belt
• ✓ Weight: Approximately: .5 pounds

• ✓ Toro SnowMaster's are designed so that the paddles should not come in contact with the ground but it scrapers or skid shoes are not properly maintained the paddle could need to be replaced
• ✓ Kit contains 2 paddles, 6 screws and nut locks needed for complete replacement

• Returnable: 90-Day
• Fits Brands: Toro
• Fits Models: 36001, 36002 and 36003