Snow Blower Parts Snow Removal Parts Accessories For Sale In Portland

• ✓ Toro SnowMaster's are designed so that the paddles should not come in contact with the ground but it scrapers or skid shoes are not properly maintained the paddle could need to be replaced
• ✓ For use with all Toro SnowMaster models

• Manufacturer Warranty: 1 Year
• Fits Brands: Toro
• Returnable: 90-Day

• Part/Accessory Type: Drive Belt
• Manufacturer Warranty: Satisfaction Guaranteed
• Includes 1 replacement belt: Yes
• Fits Models: 323E
• Returnable: 90-Day

• ✓ Helps protect blower against damage
• ✓ Set of 2 matching skids
• ✓ Original wide-tip design gives maximum float over gravel, grass and dirt, narrow-tip design penetrates snow and ice and lets you get down to the pavement
• ✓ Skid shoes fit uneven or cracked sidewalks and driveways

• Fits Brands: Any machine that as a bolt pattern 2.5" or 5" center to center
• Product Height (in.): 3.25

• Fits Brands: Stanley, Beast
• Part/Accessory Type: Light
• with this headlight assembly, removing snow is both safer and easier no matter what the lighting conditions: Yes
• Product Width (in.): 6
• Product Height (in.): 4
• Manufacturer Warranty: All sales are final.

• ✓ 2-blade replacement paddle auger
• ✓ Cuts 13 in. (33 cm) wide x 6 in. (15 cm) deep
• ✓ Fits Snow Joe models 323E + iON13SS

• Fits Models: 323E; iON13SS
• Returnable: 90-Day

• ✓ Drop kit allows plows to work on lifted trucks
• ✓ Compatible with all 2013+ SNOWBEAR Plows
• ✓ Made to work on all 2013 and newer SNOWBEAR plow models
• ✓ Provides an additional 4 in. of drop in frame to maintain correct plowing angle

• Returnable: 90-Day
• Product Depth (in.): 3

• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 3.13 x 3.13 x 3 inches.
• ✓ Intermittent duty
• ✓ Replacement motor solenoid for Meyer snowplows, replaces OEM 15370
• ✓ 5/16-24 thread terminals

2

• Includes a complete set of 2 steel bars: Yes
• Product Depth (in.): 2
• Product Height (in.): 19
• Returnable: 30-Day
• Product Width (in.): 2
• Fits Brands: Stanley;Beast

• Cutting-edge 4-speed digital drive system (3-speed XPORT for rapid return at the end of a snow-clearing run): Yes
• Engine Make: OEM Branded
• Type of Snow: Heavy
• Ideal Snow Depth (In.): 13
• Charger Included: Charger Included
• Battery Power Type: Lithium Ion

• ✓ Up to 20 ft. discharge
• ✓ Battery compatible with multiple tools for complete lawn care system

• Maximum Throwing Distance (ft.): 25
• Engine Make: OEM Branded
• Voltage (volts): 40
• Terrain Type: Flat with Obstacles

• ✓ One pair - 2-link spacing
• ✓ Fits tire sizes 16x4.80x8, 4x4.80x8
• ✓ This product cannot be shipped to: CA
• ✓ Shipping Dimensions: Approximately 7 x 7 x 5 inches.

• ✓ Lifts snow blower up over cracks and bumps
• ✓ Skid shoes fit uneven or cracked sidewalks and driveways
• ✓ Original wide-tip design gives maximum float over gravel and grass
• ✓ New dual tip design: narrow-tip on one end , and wide-tip on the other end
• ✓ Protects snow blower from damage

• Fits Models: Any that have a 2.25 in. or 4.25 in. mounting bolt pattern.

• ✓ 3-year limited warranty, lower chute and deflector guaranteed for life warranty
• ✓ Helical Auger technology features an innovative, all-steel design that can break up heavy, wet snow and throw it up and out of the chute

• Stage Type: Single-Stage Snow Blower
• Chute Material: Plastic
• Refurbished: No
• Tire Height (in.): 11

• Start Type: Electric
• Ideal Snow Depth (In.): 10
• Engine Make: OEM Branded
• Voltage (v): No Voltage
• Scraper blade easily removes snow from driveways and walkways: Yes
• Manufacturer Warranty: 90 days

• ✓ Scrape delicate surfaces like natural stone without damage/scars
• ✓ Poly scraper unbolts easily and flips exposing brand new cutting edge once original edge has worn
• ✓ Measures 88 in. wide by 19 in. high

SNOWBEAR

• Fits Models: SNOWBEAR
• Manufacturer Warranty: 1 Year Limited
• Fits Brands: SNOWBEAR

• ✓ The 28 in. clearing width with 12 in. serrated steel augers helps break up ice and snow for easier removal.
• ✓ Good for snowfalls up to 12 in. deep
• ✓ 2-year limited warranty

• Assembled Width (in.): 29 in
• Assembled Depth (in.): 49 in
• Stage Type: Two-Stage Snow Blower

• ✓ Operator controlled chute
• ✓ Convenience of the control interlock so you can continue working while rotating the exhaust chute

• Refurbished: No
• Engine Torque (ft.-lb.): 25.48
• Manufacturer Warranty: 3 Year Limited Consumer Warranty, 5 Year Limited on Gear Case, 30 Day Risk Free. Do not return to the store for any reason. For service and warranty, please contact GXi at 919-550-3221 between 8 a.m. to 5:30 EST M-F. BEAST power equipment will be repaired under manufacturer's warranty and will be repaired through a service contactor.
• Chute Material: Steel

• ✓ Will help prevent salt and road debris from damaging vehicle grill and /or hood
• ✓ Heavy-duty linear actuator with internal clutch and chain lift
• ✓ Made of rugged material for long lasting usage
• ✓ Keeps snow spray off windshield and increases visibility

• Returnable: 90-Day
• Fits Brands: SNOWBEAR

• ✓ Weight: Approximately: 6.4 pounds
• ✓ 6.4 lbs.
• ✓ Slotted shaft end
• ✓ Slot is 3/16 in. W x 1/4 in. deep

• ✓ 180 degree chute rotation and lightweight design
• ✓ 2200 RPM to clear a path 18 in. wide by 8 in. deep

• Power Type: Cordless
• Assembled Depth (in.): 20 in
• Stage Type: Single-Stage Snow Blower
• Number of Forward Speeds: 1

• ✓ Up to 30 ft. throwing distance
• ✓ 180° chute rotation
• ✓ Electric operation is ideal for light snowfalls on patios, walkways and sidewalks

• Body Material: Plastic
• Plowing Capacity (lbs/min): 59000
• Assembled Height (in.): 20 in

• ✓ Designed to lift snow blowers up over sidewalk cracks or bumps
• ✓ Made from 1/2 in. T plate steel (bottom runner)

• Requires Hub?: No Hub Required
• Hub Required: No hub connection available
• Product Height (in.): 3.5
• Product Width (in.): 1.125

12

• ✓ Designed for the fast and easy removal of snow
• ✓ Assembly Required

• Traction: Wheel Drive
• Ideal Snow Depth (In.): 12
• Pitch Control: Remote
• Impeller Diameter (in.): 12

• ✓ 0.325 in. Dia bolt shank with 0.310 in. Dia thread
• ✓ Designed for Ariens deluxe series sno-thro models

• Returnable: 90-Day
• Product Depth (in.): 11.5
• Fits Models: Deluxe Series Sno-Thros
• Part/Accessory Type: Shear Pin

• ✓ 30 in. clearing width with and large 14 in. serrated steel augers and impeller helps break up ice and snow for easier removal
• ✓ 357cc Troy-Bilt electric start engine with 30 in. clearing width

Steel

• Start Type: Electric
• Chute Material: Steel
• Auger Material: Steel
• Engine Make: OEM Branded

• ✓ 4/0 cross chain for deep lug tires
• ✓ Shipping Dimensions: Approximately 6.75 x 5 x 4.75 inches.
• ✓ This product cannot be shipped to: CA
• ✓ Fits tire sizes 13x5x6, 14x4x6

• ✓ Protect yourself from harsh elements during clearing with a snow cab, and protect your equipment when stored with a snow thrower cover (each sold separately)
• ✓ Some assembly required upon delivery
• ✓ D-Track drive system creates 50% more ground contact, providing added stability and traction in heavy snow and ice

• CA (CARB) Compliant: CARB Compliant
• Intake Height (in.): 21
• Traction: Track Drive