Snow Blower Attachments And Equipment Snow Removal For Sale In Anaheim

• Engine Torque (ft.-lb.): 0
• Number of Forward Speeds: 6
• Maximum Throwing Distance (ft.): 30
• Manufacturer Warranty: 2-year limited warranty
• In-dash headlight provide added visibility in low-light conditions: Yes
• Certifications and Listings: No Certifications or Listings

Plastic

• Chute Material: Plastic
• Stage Type: Single-Stage Snow Blower
• Number of Reverse Speeds: 0
• Assembled Height (in.): 40.5 in
• Body Material: Plastic
• CA (CARB) Compliant: CARB Compliant

• Electronic Fuel Injection: Yes
• Pitch Control: Remote
• Traction: Wheel Drive
• Tire Height (in.): 16
• Clearing Surface Type: Paved
• Ideal Snow Depth (In.): 12

• ✓ Brand New - Aftermarket - Lumix GC - Electric Starter
• ✓ Ships from the USA

• Brand: SPU

• ✓ Rust-resistant exterior for long-term use
• ✓ Push button electric start or manual starter
• ✓ 180° chute rotation provides better snow blowing control

• Oil Capacity (oz.): 20
• Power Type: Electric
• Clearing Surface Type: Gravel,Paved

• Number of Forward Speeds: 1
• Start Type: Electric
• Pitch Control: Manual
• Oil Capacity (oz.): 16
• Intake Height (in.): 12.2
• Clearing Surface Type: Paved

• Start Type: Recoil Start
• Product Weight (lb.): 154lb
• Blower allows a snow clearing width of 22 in. and a maximum intake of 16 in.: Yes
• Engine Displacement (cc): 212
• Oil Capacity (oz.): 20
• Auger Material: Steel

• Brand: Unbranded

• Chute Material: Plastic
• Traction: Wheel Drive
• Clearing Width (In.): 24
• Pitch Control: Manual
• Self-propelled with choice of 3 forward and 1 reverse speeds gives you control and versatility in winter condition: Yes
• Certifications and Listings: EPA Approved

• ✓ 179cc Troy-Bilt electric start engine with 21 in. clearing width
• ✓ Auger assist high-performance drive system design, grips ground for maximum clearing power
• ✓ 190° E-Z Chute control with manual pitch control

• Pitch Control: Manual
• Chute Turning Radius (Degrees): 190
• Fuel Tank Capacity (gallons): .5

• ✓ Replacement scraper bar
• ✓ Fits Snow Joe

• Assembled Product Dimensions (L x W x H): 20.00 x 5.00 x 4.00 Inches
• Brand: Snow Joe
• Model: iON18SB

• Clearing Width (In.): 21
• Assembled Width (in.): 21 in
• Intake Height (in.): 20
• Prevents walkway damage and reduces hang-ups on uneven surfaces: Yes
• Maximum Throwing Distance (ft.): 36
• Engine Torque (ft.-lb.): 9.2

• ✓ Refurbished
• ✓ No gas, oil or tune-ups make it effortless to start

• Chute Material: Plastic
• Product Weight (lb.): 32.6 lb
• Clearing Surface Type: Paved
• Recommended Terrain: Flat,With Obstacles

• ✓ Flip Manufacturing part number: 211943
• ✓ Aftermarket direct replacement. 60 day warranty. Hassle free returns.
• ✓ Direct replacement for manufacturer part number(s):

• Assembled Product Dimensions (L x W x H): 7.00 x 7.00 x 6.00 Inches
• Assembled Product Weight: 9.00 lb

• ✓ Quality Aftermarket Part with 1 Year Warranty
• ✓ Tire tubes fit many different sizes. Size stamped on tube may not match the exac
• ✓ 21x12x8 21x9x8 TR13 Straight Valve for Meyer Snow Blower Thrower

• Brand: The ROP Shop
• Manufacturer Part Number: RSM-80-00-620_Y143

• ✓ Cut into snow drifts and direct snow into the snow blower for more complete removal
• ✓ Easily installed on either side of the auger
• ✓ Rotate downward, out of the way, when not needed

• Manufacturer Warranty: All sales are final.
• Fits Models: 30SBM16, 36SBM16, 45SBM16, 30SDM16, 36SDM16, 45SDM16
• Product Height (in.): 19

• ✓ Fits: Snow Blowers and Winter Gasoline Generators
• ✓ Fits Part Number: 208CC Engine

• Brand: SPU
• Model: 0312Q3PJ5XO

• ✓ Assembly required: estimated time 25-minutes
• ✓ 12 in. serrated all-steel augers pull snow into the blower unit to power through tough conditions
• ✓ Push button electric start or manual starter
• ✓ Self-propelled

• Tire Width (in.): 4
• Clearing Width (In.): 27

• Brand: HQRP
• Power Type: Electric

• ✓ Please Note: Tires and tire chains in picture are a representation; these are not included with the chain tensioners
• ✓ Set of New TIRE CHAIN TENSIONERS
• ✓ Please Note: Tires and tire chains in picture are a representation; the

• Brand: The ROP Shop
• Manufacturer Part Number: HJT-QG20048_W36

• ✓ Consult owners manual for proper part number identification and proper installation
• ✓ New, Bulk Packed

• Assembled Product Weight: 0.02 oz
• Assembled Product Dimensions (L x W x H): 2.00 x 0.90 x 4.00 Inches
• Brand: MTD
• Model: 941-0174

• ✓ Deflector, lower chute, chute warranty - guaranteed for life; residential only; original owner only
• ✓ Assembly Required

• Ideal Snow Depth (In.): 12
• Intake Height (in.): 20
• Engine Displacement (cc): 252
• Clearing Width (In.): 24 in

• ✓ Moves up to 650 lbs. of snow per minute
• ✓ Full 2-year warranty

• Manufacturer Warranty: 2 years
• Product Weight (lb.): 30.3lb
• Plowing Capacity (lbs/min): 650
• Auger Diameter (in.): 18

• ✓ 10 ft. length and compatible with all Toro electric start snowblowers
• ✓ 16/3 AWG conductor copper stranded
• ✓ Suitable for use with outdoor appliances and equipment

• Returnable: 90-Day
• Fits Brands: Toro
• Product Height (in.): 2

• ✓ Rotate the drift cutter's bars down and out of the way for regular use
• ✓ Compatible with Ariens Compact Series Sno-Thro models 939003 and 920001
• ✓ 5 in. W x 5 in. H x 25 in. D

• Manufacturer Warranty: 30 Days
• Fits Models: 939003 and 920001
• Returnable: 30-Day

• ✓ Fits Snow Joe iON21SB-PRO CordlessSnow Blower
• ✓ Auger replacement blades

• Power Type: Cordless Electric
• Volts: 0
• Assembled Product Dimensions (L x W x H): 19.00 x 10.00 x 1.00 Inches
• Model: ION21SB-PRO-25.

• Brand: Husqvarna Forest & Garden
• Manufacturer Part Number: 532401347