Sell Lumber

Have built a 45/54 foot pole barn and need rough cut hemlock siding. Some general pricing would be a good start. We are interested in obtaining prices on rough cut hemlock for our building project...

Located in north central texas, willing to pick up and haul myself, want dried lumber, want clear heart wood at best, want select knotty at least, will take rough cut or smooth, would like to buy as soon as mid Sept but will wait longer to get good pricing

500 pieces (approx.) 1\\"x6\\"x6' red cedar for fencing dog eared or not (price both if possible) delivered to Silver Spring please call me. 500 pieces (approx.) 1\\"x6\\"x6' red cedar for fencing dog eared or not (price both if possible) delivered to...

At CNF Pasir Gudang, West Malaysia for manufacture of Table-tops. Meantime, please advise if you could supply KD Oak & Ash of Short lengths : 1' & up of thickness 45mm x 50mm up , select grade.

I need 3000 feet of tounge grove 1x6 aspen lumber to [put the walls in a home the more nots it shows the better it is I am looking for aspen lumber to put a home onthe walls an trim itmust be 1x6 toung and grove

Can be a log or plank. Or anything bigger than 10\\" in thickness. Looking for carving wood 10\" to two feet. Looking for basswood 2 feet x 4 feet x 10 inches. Needs to be cured at least 1 year.

Fresh (less than 3 months cut) stumps removed with sufficient heartwood. Please contact me. Persimmon (diospyrus virginiana) wanted...must be of sufficient size to have developed heartwood.

Wanted alder lumber in various sizes from 4/4 to 8/4 at least 5\" wide and the longer the better Please supply quotes. Needs to be #1 grade. I need to find a good reliable supplier of alder lumber from 4/4 to 8/4 and at least 5\" wide.

Value dependent on volume and quality. I have bought lots up to a thousand feet of sycamore, red elm, maple, oak, and would be interested in the above in addition to cherry, walnut, beech, hickory, etc.

Should not be clear but have character. I am looking for approximately 3000 linial feet of 3/4x6\" hickory. It should not me clear but have character.

I am a chainsaw artist looking for end cuts of bass wood logs to carve, I may be able to pick them up. May be able to traid carving for logs, I also make totem Poles I also use cedar logs

Summit Door, Inc. Is a wooden garage door manufacturer seeking to add hemlock to our product line. Looking for stain grade usage lumber. 2x6x18', 2x3x18' and 1x6x8' clear kiln dried in unit quantities delivered to Corona, CA 92882

Looking for 2x4s,2x6s,plywood,presswood,nails(16p)need all kinds of materials,also need concrete,cubes of blocks,too many thing to mention all of them To be used to build a house,preferrably pressure treated but not necessary as long as it is good quality...

Can be shipped to me in CT. Need 24 feet of 1x4 curley aspen to make picture frames. Can be shipped to me in CT or I can pick up locally.

This will be ongoing business. Interested in purchasing approx a truck load per month of mixed Superior and Custom Shop Grade 4/4 KD RWRL Alder.

Looking to purchase truckload (T/L) quantities of alder, specifically interested in clear material as well as rustic/knotty material. Looking to purchase truckload (T/L) quantities of alder lumber (both clear & knotty).

Prefer 4/4 #1 common rough or surfaced, kiln or well air dried (5-6%). Will pick up at mill Will pick up at mill, Oregon or Washington. Need 4/4 air or kiln dried alder and oak, 1000bf each, to replenish small shop inventory.

8-10 inch tops, 40 foot lengths. Looking for house grade pine logs in lower Michigan. Want to buy immediately. Will pay for cut logs by linear foot and have trucked to Adrian.

For delivery to Utah County, Utah, ASAP. We are willing to arrange our own shipping. Cedar Timber, 20 to 40 foot long, 12 to 36 inch diameter, 200 units. Cedar timber for lumber mill, for sideing, casings, mouldings & doors.

I need sawn pine in canada preferably canadian pine it would have to be in BC if u can give me the dimentions u have then we can go from there I may have to resaw them in BC Hi my name is parm i reside in canada I have associates in india who require...

Contrasting grain, spalting etc. I want to construct some sculpture using this characteristic. Clear white lumber out of the same log would be the best. I have seen some turned lampshades made out of quaking aspen.

We are looking to buy 6/4 Hickory Lumber, Hickory Logs or Hickory Blanks cut to specifications. Interested in green and dry. Logs: 10'6\" with the smalles end being at least 9\" diameter or 40\" blocks.

Minimum of 2000 board feet of beveled edge 1x6 tongue and groove with a finish thickness no skinnier than 5/8 inch less than 3/4inch Needed 1x6 tongue and groove aspen with relatively low moisture content somewhat local will be helpful

I will be making chairs and tables along with lawn decorations. I will also be making custom furniture that customers request. I am starting an outdoor furniture business. I am located in Annapolis MD and would like to purchase the cedar in the mid-atlantic...

I need oak or alder sawdust approx 10 yards more or less for mushroom cultivation. I need oak or alder sawdust approx 10 yards more or less for mushroom cultivation Delivered to McMimnnville, Oregon

First sample shipment will be 50 of 40'/GP I want to buy Alaska or Canada Spruce for my customers in China. First sample shipment will be 50 of 40'/GP Please contact me asap if you can supply

Boards should be dried and straight. Looking for sweetgum boards from which to build a small dining room cabinet. Preferably the wood is ready to use. Need sweetgum boards to build a small cabinet.