Sanitary Fittings

I have worked with misunderstood or uncontrollable horses for over 30 years and turned them around. I'd now like to work one on one with people so that they can keep the horse they have and form a bond and partnership.

The SharkBite Connection System offers an extensive line of barb fittings plus manifolds, supports and tools for both clamp and crimp ring PEX tubing installations. In addition to being cost effective, these systems simplify the installation compared...

These handy goof plugs allow you to move around drip irrigation fittings and emitters by plugging the holes in the main line. Double sided plugs can plug holes from .16 to .235" in diameter.

This handy, cost effective key punch is great for creating small pilot holes in header/mainline tubing to attach emitters and fittings. Punch creates a 1/8" hole.

If you want to reconfigure your irrigation system, or even if you just punched a hole in the wrong place, these goof plugs completely seal any hole in the header pipe. Compatible with any of our Drip Irrigation Kits.

These Power-Loc elbows for 1 inch irrigation header pipes allow you more flexibility and the ability to add 90 degree angles in your irrigation design. The Power-Loctm connector tightens down on the header pipe making a clean, drip-less cap to your system.

These Power-Loc Tees for 1 inch header pipes allow you more flexibility in your irrigation system design. Tees allow you to split off from your main irrigation system's water line to water more than one area at a time.

These Power-Loc Tees for 3/4 inch header pipes allow you more flexibility in your drip irrigation system design. Tees allow you to split off from your main water line to water more than one area at a time.

These adaptors allow you to easily connect to your irrigation main line tubing to hose ends, filters and other irrigation attachments. One end features a standard ¾ in. Female hose end and the other a Power-Loc connector that tightens down onto the mainline.

Quickly install drip line valves!

Fix any damaged or leaky drip tape. Simply cute the drip line in two, removing the damaged area, then attach each end to the coupling. Creates a tight seal and allows the drip tape to function as normal.

These Power-Loc couplings for 1 inch header pipes are great for adding on to your current drip irrigation system or repairing a section of damaged tubing. The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your system.

These Power-Loc couplings for 1/2 inch header pipes are great for adding on to your current drip irrigation system or repairing a section of damaged tubing. The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your...

These Power-Loc elbows for 3/4 inch drip irrigation header pipes allow you more flexibility and the ability to add 90 degree angles in your irrigation design. The Power-Loctm connector tightens down on the header pipe making a clean, drip-less cap to...

*Manufacturer- HPM ITALY *Production rate: 5000 L/h *Double stage *Sanitary version ABL Technology ltd is a dynamic company that provides global solutions for design and ... *Sanitary version.

Each kit contains 5 drip line valves and 5 drip line end sleeves.

These closures for 3/4 inch header pipes are a perfect way to cap off your drip irrigation watering system. The Power-Loc closure tightens down on the header pipe making a clean, drip-less cap to your irrigation system.

These drip irrigation closures for 1 inch header pipes are a perfect way to cap off your watering system. The Power-Loc closure tightens down on the irrigation header pipe making a clean, drip-less cap to your system.

These Power-Loc Tees for 1/2 inch header pipes allow you more flexibility in your irrigation system design. Tees allow you to split off from your main water line to water more than one area at a time.

Powder coated finish. Comes with mounting brackets, hardware and side rails. Provides stability and safety, allowing one person to attend to animal. A pair of side rails to fit your milking stanchion or fitting stand.

5 adjustable head units, 6' long, 4' wide, 2' high. Floor not included.

The stand is equipped with durable steel legs, and the front legs telescope in height. The newly designed aluminum head piece assembly adjusts in height from 25" to 44" above the platform.

These Power-Loc elbows for 1/2 inch header pipes allow you more flexibility and the ability to add 90 degree angles in your drip irrigation design. The Power-Loctm connector tightens down on the header pipe making a clean, drip-less cap to your system.

These irrigation adaptors allow you to easily connect to your main line tubing to hose ends, filters and other irrigation attachments. One end features a standard ¾ in. Female hose end and the other a Power-Loc connector that tightens down onto the mainline.

This handy T-Punch tool allows you to punch holes in you header pipe to attach drip emitters and other attachments. The metal cutting tool cleanly cuts a 1/8" hole. To make a larger ¼" hole press the knob on the handle into the 1/8" hole to expand it.

These watering system adaptors allow you to easily connect to your irrigations' main line tubing to hose ends, filters and other irrigation attachments. One end features a standard ¾ in.

These Power-Loc couplings for 3/4 inch header pipes are great for adding on to your current drip irrigation system or repairing a section of damaged tubing. The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your...