Agiseek home

Replacement Auto Parts Auto Parts Hardware For Sale In New York

Become a Partner
Severe Solution Brake Pads
Prices start at : 114.95 USD

  •  Ensures less pad separation, vibration & noise
  •  Shipping Dimensions: Approximately 13 x 5 x 5 inches.
  •  Helps reduce noise
  •  Weight: Approximately: 17.01 pounds
United States
New York
Brake Guide Pin
Prices start at : 2.99 USD

Installing new premium hardware will complement a disc pad and/or brake shoe replacement, and ensure optimal braking performance. Wagner Brake Guide Pins are the key to doing a quality job right the first time.
  •  Provides longer brake life & performance
  •  Weight: Approximately: .5 pounds
  •  Shipping Dimensions: Approximately 7 x 2 x 2 inches.
  •  Helps deliver a quieter braking system
United States
New York
Flared Adaptor
Prices start at : 68.99 USD

This AP Exhaust Technologies product ensures superior durability as well as reliable service for decades to come. The AP Exhaust flared adaptor was carefully designed with key attention to detail and manufactured from high-grade materials to the strict...
  •  This product cannot be shipped to: CA
  •  Provides years of reliable service
  •  Shipping Dimensions: Approximately 28 x 11 x 4 inches.
  •  Ensures outstanding durability
United States
New York
Ball Joint
Prices start at : 67.79 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog ball joints incorporate proven design and engineering features for like new steering and longer life.
  •  Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  •  Dust boot with encapsulated Belleville washer helps control axial & radial movement
  •  Premium forged housing with increased cross section material in key areas
  •  This product cannot be shipped to: CA
  •  Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction & enhanced strength
United States
New York
Control Arm & Ball Joint Assembly
Prices start at : 178.89 USD

  •  Ball Joint stud type - threaded
  •  Mount type - bolt on
  •  Fits the following vehicles - 1999-2004 Honda Odyssey
  •  See store for specific vehicle fitment
  •  Front Passenger Side Lower Non-Adjustable
  •  Fasteners included - no
United States
New York
Pro Solution Ceramic Brake Pads
Prices start at : 29.99 USD

The brake pads utilize premium quality friction formulation and OE-style shim technology that reduces noise and rotor wear, providing longer pad life and superior stopping for you vehicle.
  •  Weight: Approximately: 2.85 pounds
  •  OE-style shim technology substantially reduces noise
  •  Reduces rotor wear, resulting in less dust
  •  Reduces vibration that can cause braking noise
United States
New York
Chrome Exhaust Pipe Rain Cap
Prices start at : 17.99 USD

This AP Exhaust Technologies product ensures superior durability as well as reliable service for decades to come. The AP Exhaust rain cap was carefully designed with key attention to detail and manufactured from high-grade materials to the strict standards...
  •  This product cannot be shipped to: CA
  •  Weight: Approximately: 1.12 pounds
  •  4.5 in. inner diameter
  •  Curved, angle & slant cut
United States
New York
Control Arm & Ball Joint Assembly
Prices start at : 184.29 USD

  •  Front Driver Side Lower Non-Adjustable
  •  Length - 13.890 in.
  •  Weight: Approximately: 6.38 pounds
  •  See store for specific vehicle fitment
  •  Ball Joint stud type - threaded
  •  Pre-greased - yes
United States
New York
Total Solution Ceramic Brake Pads
Prices start at : 39.99 USD

  •  Monitor wear to reduce damage to rotors
  •  Vehicle-specified engineered formulations providing clean, quiet braking and long service life
  •  Shipping Dimensions: Approximately 8 x 5 x 3 inches.
  •  Moly-based synthetic oil lubricant
  •  Reduces vibration that can cause braking noise
United States
New York
Control Arm & Ball Joint Assembly
Prices start at : 154.19 USD

  •  Ball Joint attachment type - press in
  •  Color/finish/material - black/paint/stamped steel
  •  Hardware included - yes
  •  Greaseable/grease fittings included - no/no
  •  Length - 20.470 in.
  •  Weight: Approximately: .82 pounds
United States
New York
Wheel Bearing & Hub Assembly
Prices start at : 188.99 USD

Precision tolerances and improved surface finishing reduce noise and vibration, and high quality reproduction sensors prevent the compromise of ABS functions. From the composition of the steel to the quality of the bearing and seals, every aspect of a...
  •  Engineered to meet or exceed OE specifications
  •  OE sensors assure correct ABS functions & prevent malfunctions
  •  Premium seals, both inboard & outboard, protect the bearing from contamination
  •  Proper implementation of heat treatment
  •  Shipping Dimensions: Approximately 8 x 7 x 5 inches.
United States
New York
Tie Rod End
Prices start at : 42.79 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life.
  •  Exclusive cover plate protects against contaminants leaking into the bearing surface
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 10 x 5 x 3 inches.
  •  The cover plate design allows for tighter tolerances for a more durable part
  •  Greaseable sockets reduce corrosion & wear by allowing new lubricant to flush contaminants
United States
New York
Wheel Bearing
Prices start at : 45.89 USD

Precision tolerances and improved surface finishing reduce noise and vibration, and high quality reproduction sensors prevent the compromise of ABS functions. From the composition of the steel to the quality of the bearing and seals, every aspect of a...
  •  This product cannot be shipped to: CA
  •  OE sensors assure correct ABS functions & prevent malfunctions
  •  Premium seals, both inboard & outboard, protect the bearing from contamination
  •  Shipping Dimensions: Approximately 4 x 4 x 2 inches.
  •  Precision bearing preload & correct application of advanced manufacturing techniques improve performance and extend the life
United States
New York
Brake Pin Boot Kit
Prices start at : 1.99 USD

Installing new premium hardware will complement a disc pad and/or brake shoe replacement, and ensure optimal braking performance. Wagner Brake Pin Boot Kits are the key to doing a quality job right the first time.
  •  This product cannot be shipped to: CA
  •  Produces smoother pedal travel
  •  Provides longer brake life & performance
  •  Maintains proper movement for safe, effective stopping performance
United States
New York
Total Solution Ceramic Brake Pads
Prices start at : 54.99 USD

  •  Moly-based synthetic oil lubricant
  •  This product cannot be shipped to: CA
  •  Reduces vibration that can cause braking noise
  •  Weight: Approximately: 4.33 pounds
  •  Monitor wear to reduce damage to rotors
United States
New York
Coil Spring Set
Prices start at : 89.79 USD

  •  Easy to install
  •  Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
  •  Free Height - 14.75 in.
  •  Bar Diameter - 0.56 in.
  •  ID - 5.57 in.
  •  Spring Rate - 122 lbs. per in.
United States
New York
Strut-Mate Strut Mounting Kit
Prices start at : 38.69 USD

In addition, Monroe's full line will provide you with late model original equipment coverage, as well as complementing the ride control characteristics of Monroe struts. Monroe Strut-Mate Mounting Kits are designed to reduce noise and vibration and should...
  •  Superior rubber-to-steel bonding & plated steel for longer wear & to meet or exceed OE performance
  •  Upper & lower spring isolators prevent metal-to-metal contact & helps eliminate noise between the spring & spring seat
  •  Upper spring seat provides consistent performance without transmitting noise or vibration into the chassis
  •  Premium bearing is manufactured to meet OE performance
  •  Shipping Dimensions: Approximately 7 x 6 x 4 inches.
United States
New York
Steering Damper
Prices start at : 36.95 USD

Acting as a horizontal shock absorber, Monroe Magnum steering stabilizers help reduce vibrations that travel through the steering system to the driver. The Monroe Magnum steering stabilizer stops vibration before it gets to the driver.
  •  Increase control under all driving conditions by reducing steering shimmy & driver fatigue
  •  Special, self-lubricating fluid seal designed to retain gas without excessive wear or friction
  •  Weight: Approximately: 3.83 pounds
  •  Full displaced valving has better range on both the compression & extension cycles of the unit for a smooth, comfortable ride
  •  Micro-cellular gas design allows the unit to be mounted horizontally
  •  Ideally suited for trucks, vans, & 4-wheel drive vehicles
United States
New York
Pro Solution Semi-Metallic Brake Pads
Prices start at : 24.99 USD

The brake pads utilize premium quality friction formulation and OE-style shim technology that reduces noise and rotor wear, providing longer pad life and superior stopping for you vehicle.
  •  Reduces vibration that can cause braking noise
  •  Shipping Dimensions: Approximately 7 x 4 x 4 inches.
  •  This product cannot be shipped to: CA
  •  Engineered to help ensure a quiet ride
United States
New York
Exhaust Pipe Adapter
Prices start at : 4.99 USD

Made from high-grade materials, this AP Exhaust Technologies product is known for its outstanding reliability. Featuring solid workmanship, it provides reliable service for years ahead.
  •  This product cannot be shipped to: CA
  •  Shipping Dimensions: Approximately 1 x 1 x 1 inches.
  •  4.5 in. length
  •  Provides years of reliable service
  •  Weight: Approximately: .43 pounds
United States
New York
Ball Joint
Prices start at : 78.89 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog ball joints incorporate proven design and engineering features for like new steering and longer life.
  •  Weight: Approximately: .81 pounds
  •  Premium forged housing with increased cross section material in key areas
  •  Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  •  Dust boot with encapsulated Belleville washer helps control axial & radial movement
  •  Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction & enhanced strength
United States
New York
Suspension Conversion Kit
Prices start at : 201.95 USD

No vehicle modifications required for an easy installation. Monroe Suspension Conversion Kits convert a vehicle's factory equipped air or electronic suspension to a non-air or non-electronic suspension set up.
  •  Restores your vehicle factory ride height & provides a stable, comfortable ride
  •  This product cannot be shipped to: CA
  •  Converts from Monroe electronic to passive suspension
  •  Weight: Approximately: 22.83 pounds
United States
New York
Tie Rod End
Prices start at : 33.79 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life.
  •  Shipping Dimensions: Approximately 10 x 4 x 3 inches.
  •  The cover plate design allows for tighter tolerances for a more durable part
  •  Weight: Approximately: 1.38 pounds
  •  Sunoloy-coated metal bearings provide the smooth stud swing that technicians & drivers love
  •  This product cannot be shipped to: CA
United States
New York
Axle Bearing & Hub Assembly Repair Kit
Prices start at : 83.09 USD

Precision tolerances and improved surface finishing reduce noise and vibration, and high quality reproduction sensors prevent the compromise of ABS functions. From the composition of the steel to the quality of the bearing and seals, every aspect of a...
  •  Shipping Dimensions: Approximately 7 x 7 x 7 inches.
  •  Weight: Approximately: 5.32 pounds
  •  Precision bearing preload & correct application of advanced manufacturing techniques improve performance and extend the life
  •  High-quality steel & surface finishes prolong the lifespan and prevent bearing noise
  •  Proper implementation of heat treatment
United States
New York
Control Arm & Ball Joint Assembly
Prices start at : 42.99 USD

  •  Bushings included - yes
  •  Attach method - bolt on
  •  Pre-greased - yes
  •  Shipping Dimensions: Approximately 21 x 21 x 7 inches.
  •  Hardware included - yes
  •  This product cannot be shipped to: CA
United States
New York
Control Arm
Prices start at : 55.49 USD

  •  Weight: Approximately: 6.38 pounds
  •  Color/finish/material - black/paint/forged steel
  •  Bushing material - rubber
  •  Bushings included - yes
  •  Fits the following vehicles - 1997-1999 Acura CL, 1994-1997 Honda Accord
  •  Length - 14.860 in.
United States
New York
Alignment Shim
Prices start at : 11.09 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog alignment kits incorporate proven design and engineering features for like new steering and longer life.
  •  Cam bolts & adjustment ball joints provide alignment for non-adjustable vehicles
  •  Incorporates proven design & engineering features
  •  This product cannot be shipped to: CA
  •  Shims & bushings provide precise camber, caster, & toe adjustments
  •  Able to solve excessive tire wear & steering issues
United States
New York