Replacement Auto Parts Auto Parts Hardware For Sale In Hartford

Control Arm

Prices start at : 103.99 USD

✓ Shipping Dimensions: Approximately 21 x 17 x 4 inches.
✓ Front Passenger Side Lower Non-Adjustable
✓ Fits the following vehicles - 2003-2008 Pontiac Vibe, 2009-2013 Toyota Corolla, 2003-2008 Toyota Matrix
✓ See store for specific vehicle fitment
✓ Hardware included - no
✓ Greaseable/grease fittings included - no/no

Connecticut

Hartford

Exhaust Pipe Adapter

Prices start at : 4.99 USD

Made from high-grade materials, this AP Exhaust Technologies product is known for its outstanding reliability. There are no compromises when it comes to quality, so you can be sure that this product has unparalleled quality.

✓ Weight: Approximately: .38 pounds
✓ Provides years of reliable service
✓ 2 in. inner diameter
✓ 1.625 in. outer diameter
✓ Ensures outstanding durability

Connecticut

Hartford

Tie Rod End

Prices start at : 63.79 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life.

✓ Sunoloy-coated metal bearings provide the smooth stud swing that technicians & drivers love
✓ Weight: Approximately: 1.67 pounds
✓ This product cannot be shipped to: CA
✓ Powdered metal gusher bearing design enables grease to flow through for reduced friction & enhanced strength
✓ Exclusive cover plate protects against contaminants leaking into the bearing surface

Connecticut

Hartford

Wheel Bearing & Hub Assembly

Prices start at : 190.99 USD

Precision tolerances and improved surface finishing reduce noise and vibration, and high quality reproduction sensors prevent the compromise of ABS functions. From the composition of the steel to the quality of the bearing and seals, every aspect of a...

✓ Shipping Dimensions: Approximately 9 x 9 x 8 inches.
✓ Proper implementation of heat treatment
✓ Weight: Approximately: 12.96 pounds
✓ Engineered to meet or exceed OE specifications
✓ Precision bearing preload & correct application of advanced manufacturing techniques improve performance and extend the life

Connecticut

Hartford

Tie Rod End

Prices start at : 67.99 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life.

✓ Weight: Approximately: 2.34 pounds
✓ Powdered metal gusher bearing design enables grease to flow through for reduced friction & enhanced strength
✓ The cover plate design allows for tighter tolerances for a more durable part
✓ This product cannot be shipped to: CA
✓ Sunoloy-coated metal bearings provide the smooth stud swing that technicians & drivers love

Connecticut

Hartford

Control Arm & Ball Joint Assembly

Prices start at : 35.99 USD

✓ Length - 8.340 in.
✓ Rear Upper Forward
✓ Ball Joint stud type - threaded
✓ Weight: Approximately: 6.38 pounds
✓ Hardware included - yes
✓ Fasteners included - no

Connecticut

Hartford

Pro Solution Semi-Metallic Brake Pads

Prices start at : 34.99 USD

The brake pads utilize premium quality friction formulation and OE-style shim technology that reduces noise and rotor wear, providing longer pad life and superior stopping for you vehicle.

✓ Weight: Approximately: 7.02 pounds
✓ Engineered to help ensure a quiet ride
✓ Reduces rotor wear, resulting in less dust
✓ Reduces vibration that can cause braking noise

Connecticut

Hartford

Coil Spring Set

Prices start at : 114.49 USD

✓ End Type 2 - Tangential
✓ Designed to lower stresses for longer service life
✓ Weight: Approximately: 14.78 pounds
✓ Spring Rate - 94 lbs. per in.
✓ ID - 5.22 in.
✓ Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Connecticut

Hartford

Control Arm & Ball Joint Assembly

Prices start at : 116.19 USD

✓ Color/material - gray/forged aluminum
✓ Greaseable/grease fittings included - no/no
✓ Ball Joint included/installed - yes/yes
✓ Mount type - bolt on
✓ Attach method - bolt on
✓ Length - 15.740 in.

Connecticut

Hartford

Door Lock Knob Assortment

Prices start at : 4.19 USD

✓ Weight: Approximately: .035 pounds
✓ Contains two different knobs & two different grommets that fit various models
✓ This product cannot be shipped to: CA

Connecticut

Hartford

Strut-Mate Strut Mounting Kit

Prices start at : 13.49 USD

In addition, Monroe's full line will provide you with late model original equipment coverage, as well as complementing the ride control characteristics of Monroe struts. Every new strut deserves a Strut-Mate Mounting Kit.

✓ Shipping Dimensions: Approximately 5 x 5 x 3 inches.
✓ SAE-grade nuts & bolts meet OE design
✓ Weight: Approximately: .67 pounds
✓ Upper spring seat provides consistent performance without transmitting noise or vibration into the chassis
✓ Premium bearing is manufactured to meet OE performance

Connecticut

Hartford

Exhaust Pipe Adapter

Prices start at : 4.99 USD

✓ 1.5 in. outer diameter
✓ Ensures outstanding durability
✓ Provides years of reliable service
✓ 4 in. length
✓ 1.75 in. inner diameter

Connecticut

Hartford

Control Arm

Prices start at : 82.79 USD

✓ Greaseable/grease fittings included - no/no
✓ Pre-greased - no
✓ This product cannot be shipped to: CA
✓ Fits the following vehicles - 1994-1999 Dodge Ram
✓ Attach method - bolt on
✓ Bushings included - yes

Connecticut

Hartford

Ball Joint

Prices start at : 88.69 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog ball joints incorporate proven design and engineering features for like new steering and longer life.

✓ Shipping Dimensions: Approximately 12 x 6 x 4 inches.
✓ Greaseable socket reduces corrosion & wear by allowing new lubricant to flush contaminants
✓ Dust boot with encapsulated Belleville washer helps control axial & radial movement
✓ Premium forged housing with increased cross section material in key areas
✓ Hardened ball stud made of OE equivalent or better materials to withstand higher loads

Connecticut

Hartford

Tie Rod End

Prices start at : 47.89 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life.

✓ Powdered metal gusher bearing design enables grease to flow through for reduced friction & enhanced strength
✓ Greaseable sockets reduce corrosion & wear by allowing new lubricant to flush contaminants
✓ Exclusive cover plate protects against contaminants leaking into the bearing surface
✓ This product cannot be shipped to: CA
✓ Shipping Dimensions: Approximately 10 x 4 x 3 inches.

Connecticut

Hartford

Ball Joint

Prices start at : 57.89 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog ball joints incorporate proven design and engineering features for like new steering and longer life.

✓ Weight: Approximately: 1.75 pounds
✓ Dust boot with encapsulated Belleville washer helps control axial & radial movement
✓ Premium forged housing with increased cross section material in key areas
✓ Greaseable socket reduces corrosion & wear by allowing new lubricant to flush contaminants
✓ Larger grease reservoir & easy-to-install pre-tapped grease fitting hole for improved maintenance

Connecticut

Hartford

Radiator Cap - 10235

Prices start at : 3.95 USD

✓ Part Number - 10235
✓ Weight: Approximately: .2 pounds
✓ A faulty radiator cap can cause your car to boil-over at a lower temperature
✓ SAE Range 18-22 psi
✓ 20 psi
✓ Shipping Dimensions: Approximately 2.625 x 2.625 x 2.625 inches.

Connecticut

Hartford

U-Joint

Prices start at : 30.79 USD

✓ Needle bearings & snap rings sourced from OE supplier
✓ This product cannot be shipped to: CA
✓ Flush lube fitting in the bearing cap for added strength
✓ Super Strength alloy steel crosses for higher torque & horsepower
✓ Nitrile rubber grease seals have compressed double lip design for protection from contaminants

Connecticut

Hartford

Control Arm & Ball Joint Assembly

Prices start at : 150.09 USD

✓ Ball Joint stud type - threaded
✓ Ball Joint included/installed - yes/yes
✓ Mount type - bolt on
✓ Shipping Dimensions: Approximately 24 x 6 x 6 inches.
✓ Bushings included - yes
✓ Length - 15.840 in.

Connecticut

Hartford

Tie Rod End

Prices start at : 51.69 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life.

✓ This product cannot be shipped to: CA
✓ The cover plate design allows for tighter tolerances for a more durable part
✓ Exclusive cover plate protects against contaminants leaking into the bearing surface
✓ Powdered metal gusher bearing design enables grease to flow through for reduced friction & enhanced strength
✓ Weight: Approximately: 2.34 pounds

Connecticut

Hartford

Auto Transmission Output Shaft Seal

Prices start at : 5.99 USD

SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase...

✓ Formulated synthetic rubber blends can stand temperatures as low as -40 degrees to as high as 400 degrees Fahrenheit
✓ Reliable & dynamic sealing while ensuring a long service life
✓ Weight: Approximately: .14 pounds
✓ This product cannot be shipped to: CA
✓ Shipping Dimensions: Approximately 4 x 4 x 1 inches.

Connecticut

Hartford

Tie Rod End

Prices start at : 76.69 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life.

✓ The cover plate design allows for tighter tolerances for a more durable part
✓ Weight: Approximately: 1.58 pounds
✓ Powdered metal gusher bearing design enables grease to flow through for reduced friction & enhanced strength
✓ Greaseable sockets reduce corrosion & wear by allowing new lubricant to flush contaminants
✓ Shipping Dimensions: Approximately 13 x 4 x 3 inches.

Connecticut

Hartford

Control Arm & Ball Joint Assembly

Prices start at : 84.69 USD

✓ Bushings included - yes
✓ Weight: Approximately: 6.38 pounds
✓ Color/finish/material - black/paint/stamped steel
✓ Ball Joint attachment type - press in
✓ Fits the following vehicles - 1998-2010 Volkswagen Beetle, 1999-2010 Volkswagen Golf, 2004 Volkswagen Golf GTI/Golf GTI 1.8T/Golf GTI VR6, 1999-2005 Volkswagen Jetta
✓ Greaseable/grease fittings included - yes/yes

Connecticut

Hartford

Tie Rod End

Prices start at : 42.99 USD

The easy installation design makes this perfect for mechanics at work or at home. Moog tie rod ends incorporate proven design and engineering features for like new steering and longer life.

✓ Weight: Approximately: 1.26 pounds
✓ Sunoloy-coated metal bearings provide the smooth stud swing that technicians & drivers love
✓ Greaseable sockets reduce corrosion & wear by allowing new lubricant to flush contaminants
✓ Powdered metal gusher bearing design enables grease to flow through for reduced friction & enhanced strength
✓ Exclusive cover plate protects against contaminants leaking into the bearing surface

Connecticut

Hartford

Brake Hose

Prices start at : 19.99 USD

Wagner Brake Hose hydraulics deliver improved OE-design products to the aftermarket, giving you the capability to repair and improve a brake system with the finest products possible.

✓ Extensive field testing ensures the ultimate performance
✓ Weight: Approximately: .36 pounds
✓ Shipping Dimensions: Approximately 9 x 5 x 2 inches.
✓ Exceptional quality control

Connecticut

Hartford

Wheel Bearing & Hub Assembly

Prices start at : 316.59 USD

✓ Shipping Dimensions: Approximately 7 x 7 x 7 inches.
✓ This product cannot be shipped to: CA
✓ Precision bearing preload & correct application of advanced manufacturing techniques improve performance and extend the life
✓ High-quality steel & surface finishes prolong the lifespan and prevent bearing noise
✓ Weight: Approximately: 7.2 pounds

Connecticut

Hartford

Wheel Seal

Prices start at : 3.29 USD

✓ High-grade carbon steel, coated with phosphate to ensure rust protection
✓ Incorporates a seal lip design that meets or exceeds OE specifications
✓ Formulated synthetic rubber blends can stand temperatures as low as -40 degrees to as high as 400 degrees Fahrenheit
✓ Reliable & dynamic sealing while ensuring a long service life
✓ Weight: Approximately: .09 pounds

Connecticut

Hartford