Rainbird Solenoid Sprinkler Valve

• Manufacturer Warranty: 6 Years
• Maximum Pressure (psi): 120
• Pressure Rating: 125
• Inlet Size (in.): .75
• Thread Type: Female
• Product Width (in.): 3.25

• ✓ 1 in. female NPT inlet and outlet
• ✓ Rugged, double-beaded diaphragm provides a leak-proof seal

• Maximum Pressure (psi): 150
• Operation: Automatic
• Thread Type: Female
• Pressure Rating: 10-150

• ✓ Optimal operating pressure: 10 to 85 PSI
• ✓ 4 5/16" Footprint Size (Center to center of inlet/outlet)

• Returnable: 90-Day
• Outlet Size (in.): 2 or less
• Compatible Pipe Material: PVC
• Installation: Above Ground

• ✓ Only use standard clear PVC cement (not included) for installation of the valve and allow 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and not the valve housing
• ✓ Valve is recommended for use in a pump driven irrigation system
• ✓ Great alternative to individual solenoid valves

• Thread Type: none
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Outlet Size (in.): 2 or less

• Product Width (in.): 2 in
• For outdoor use only: Yes
• Irrigation System Component: Valve
• Compatible Pipe Material: PVC
• Returnable: 90-Day
• Inlet Size (in.): .75

• ✓ ASSE listed 1024, CSA certified, NSF listed - standard 61, annex G
• ✓ 1 in. female meter thread connection (inlet) x 1 in. male meter thread connection (outlet)

175

• Product Length (in.): 2.75
• Maximum Pressure (psi): 175
• Material: Brass
• Pressure Rating: 175

• ✓ 1 in. male NPT x barb inlet and outlet connection for installation below ground in a valve box
• ✓ Installation and operating instructions are included in English and Spanish for your convenience
• ✓ Operates in wide flows and pressure ranges from 0.25 GPM to 30 GPM and 10 psi to 150 psi
• ✓ Double-beaded diaphragm offers a leak-proof seal

• Pressure Rating: 10-150 PSI
• Thread Type: Male

• ✓ Bleed screw
• ✓ Listed by the international association of plumbing and mechanical officials (IAPMO)

• Installation: Below Ground
• Connection: FIP x FIP
• Pressure Rating: 150 PSI
• Maximum Working Temperature (F): 120

• An anti-siphon valve (not included) is recommended and may be required for safe operation of the FIMCO hydro indexing valve on a city water installation: Yes
• Product Width (in.): 5.5 in
• Connection: Slip-Joint
• Inlet Size (in.): 1.25
• Product Height (in.): 6.25
• Material: Acrylonitrile Butadiene Styrene (ABS)

• ✓ Manual on/off function
• ✓ Internal bleed lever is great for testing and flushing the sprinkler lines
• ✓ Compatible with most industry standard 24-Volt sprinkler systems
• ✓ For cold water use only

• Connection: Female Pipe Thread
• Product Length (in.): 3 in

• Maximum Working Temperature (F): 140
• Package Quantity: 1
• Irrigation System Component: Valve
• Double check valve assembly consisting of two independently operated spring-loaded center guided check valves: Yes
• Number of Outlets: 0
• Material: Brass

• Irrigation System Component: Valve
• Product Height (in.): 5.25
• Product Length (in.): 5
• Product Width (in.): 3.125
• Manufacturer Warranty: Five Year Limited Warranty
• Outlet Size (in.): 2 or less

• ✓ Compatible with most Lawn Genie and Irritrol 3/4 in. anti-siphon valves
• ✓ Electric H-body atmospheric vacuum breaker
• ✓ Replaces Lawn Genie anti-siphon valves
• ✓ Rugged, double-beaded TPR diaphragm

• Thread Type: Female
• Pressure Rating: 150 PSI

• ✓ Flow-control adjustment
• ✓ Bleed screw for manual on/off operation and for testing and flushing of sprinkler system
• ✓ For outdoor use with cold water only

• Material: Plastic
• Inlet Size (in.): .75
• Compatible Pipe Material: PVC

• ✓ 1 valve can replace up to (6) 1 1/4 in. solenoids
• ✓ 10 PSI minimum pressure rating
• ✓ Valve is recommended for use in a pump driven irrigation system

• Package Quantity: 1
• Installation: Above Ground
• Material: Acrylonitrile Butadiene Styrene (ABS)

• ✓ Made for installation on potable water lines
• ✓ ASSE listed 1015, IAPMO listed, CSA certified B64.5, AWWA compliant C510, approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California, NSF listed - Standard 61, annex G

• Number of Outlets: 1
• Pressure Rating: 175
• Product Width (in.): 11
• Returnable: 90-Day

• Maximum Pressure (psi): 150
• Product Weight (lb.): 1.167lb
• Maximum Working Temperature (F): 120
• Irrigation System Component: Valve
• Installation: Above Ground
• Operation: Automatic

• ✓ Heavy duty, corrosion and UV resistant PVC construction increases the life of the valve
• ✓ 0.25 to 35 GPM output controls the amount of water pressure going to each zone

• Inlet Size (in.): 1
• Outlet Size (in.): 2 or less
• Product Width (in.): 3 in
• Irrigation System Component: Valve

• ✓ Manual bleed screw to flush dirt and debris during installation and startup
• ✓ 1 in. female threaded inlet and outlet (use 1 in. MPT threaded pipe adapters with Teflon tape)
• ✓ Energy efficient, low power encapsulated solenoid with captured plunger for long lasting dependability

• Pressure Rating: 15 - 150 psi
• Product Length (in.): 4.75 in
• Returnable: 90-Day

• Thread Type: Pipe Thread
• Product Length (in.): 4.75 in
• Maximum Working Temperature (F): 125
• Operation: Automatic
• Heavy duty construction: Yes
• Inlet Size (in.): 1

• ✓ 5 to 150 gpm output controls the amount of water pressure going to each zone
• ✓ Durable glass-filled nylon construction and reinforced rubber diaphragm ensures long life and reliable performance

• Inlet Size (in.): 1
• Product Width (in.): 3.125 in
• Irrigation System Component: Valve
• Returnable: 90-Day

• ✓ Standard flow stem and disc assembly (included) requires a minimum of 10 GPM, the low-flow stem and disc assembly requires a minimum of only 6 GPM (not included)
• ✓ 1 year manufacturers guarantee

• Thread Type: none
• Maximum Pressure (psi): 85
• Valve Type: Indexing
• Connection: Slip-Joint

• Maximum Working Temperature (F): 170
• Compatible Pipe Material: Multi-Purpose
• Material: Brass
• Product Height (in.): 6.25
• 2 in. reduced principle assembly consists of a pressure differential relief valve located between two independently operated spring-loaded wye tape center guided check valves: Yes
• Pressure Rating: 175

• ✓ Dual check valve backflow preventer consisting of two independently operated in-line spring-loaded check valves
• ✓ annex G
• ✓ Valve may be installed vertically

• Inlet Size (in.): .5
• Number of Outlets: 0
• Product Height (in.): 1.75

• Outlet Size (in.): 2 or less
• Valve Type: Reduce Pressure Zone
• Product Weight (lb.): 40 lb
• Thread Type: FIP
• Returnable: 90-Day
• 2 in. reduced principle assembly consists of a pressure differential relief valve located between two independently operated spring-loaded wye tape center guided check valves: Yes

• ✓ For use in automatic sprinkler systems controlled by a 24 VAC timer
• ✓ 0.5 - 15 GPM flow rate

• Product Weight (lb.): .52lb
• Thread Type: Male NPT
• Outlet Size (in.): 2 or less
• Connection: Male Pipe Thread

• ✓ Heavy-duty 24-Volt hunter solenoid offers dependable operation and long performance life
• ✓ Rigid diaphragm prevents stress failure in tough conditions
• ✓ Durable construction protects against stress failure

• Outlet Size (in.): 2 or less
• Product Length (in.): 2.5 in
• Product Height (in.): 5.7