Portable Bucket Milking Machines Milking Equipment For Sale In Texas

Black plastic device snaps onto the top center of the Libero Lid. By-pass device is used to convert the Libero Clear Milking Lid (312) into a fresh cow lid.

Replacement Long Handle for 2609021 Deluxe Stainless Steel Milking Bucket.

6-15/16" ID, 7-21/32" OD bucket rim is compatible with many commonly available milking lids and seals tightly with included solid storage lid. A permanent scale on the side of the bucket indicates pounds and kilograms in molded-in numerals.

Has two 5/8" nipples. Includes lid gasket. Fits buckets with top ID from 6-3/4" to 8". The Coburn Clear Poly Fresh Cow Lid with gasket fits all Coburn buckets as well as 10 gallon cans.

Includes ball, cage and adjustable clamp. Check Ball Assembly for Bucket.

The design features exceptional workmanship and fine polished stainless steel construction. ID of the lid is 7-/8". Lid fits buckets which measure 5.7" (145mm) between top of bucket and bottom of handle.

If you would just like the Original Standard Claw only, click here. Complete claw assembly that is included with the NuPulse Mini Milker. Includes set of inflations , shells, short air tubes, claw, hose and squeeze clamp.

6-15/16" ID, 7-21/32" OD bucket rim is compatible with many commonly available milking lids and seals tightly with included solid storage lid. A permanent scale on the side of the bucket indicates pounds and kilograms in molded-in numerals.

Plated Handle Set w/Screws f/ Poly Bucket

This assembly includes a 7 ft. Piece of Vacuum Tubing and a 5 ft. The ITP205 Assembly for sheep includes two claws, 0/30 liners and shells as well as splitters, bracket and other tubing for a ready-made goat milking assembly.

NOTE: Buckets are NOT INCLUDED with Base Units. Order Buckets and Milking Clusters separately from the number of options available. The Coburn PortaMilkerII gives every dairyman the opportunity to use a highly efficient milking machine.

Stainless trap lid with 90's, 58" with checkball for short handle on bucket.

The PortaMilker is compact, easily maneuvered and easily transported. PortaMilker Base Unit includes steel vacuum tank, lubricated Conde vacuum pump, spring-loaded vacuum regulator, vacuum cock, vacuum gauge, and large non-corrosive hard rubber 10 inch...

Lid Gasket (6-3/8 " x 7-7/8 " x 3/16 ") for Surge 104554 Milker, Perfection DE120-75A Regular, Sears 9830, Bou-matic 8500604 Bucket and Chore-Boy S63A Suspended Milkers.

Order side plate MPXHP separately. Replacement Stainless Steel Milking Handle for MP120X or MP140X only.

Lid Gasket (6-1/4 " x 9 " x 1-3/8 ") for Polycarbonate fresh cow lid 140425, 140435, 140427, 4008096 and QuarterMilker lid 100QMLG , .

Included in the assembly are 40 lb. Order Milking Cluster separately. Of Vacuum Tubing. Poly Bucket, Storage Lid, D/L-style Milking Lid, Vacuum Pulsator (50:50 ratio), Adapter and 8 ft.

It features smooth seamless molded interior and a raised reinforcement ring at the bottom for strength and ease of gripping. Eco-Bucket has a stainless steel D/L-style (short) locking handle, snap-on handle attachment (fits either side of bucket) and...

Gasket is included. Fine polished stainless steel lid has two 5/8" ID nipples. Inside dimension of rim is 7-7/8" ID. Lid fits buckets which measure 4.7" (120mm) between top of bucket and bottom of handle.

Included in the assembly are 65 lb. Order Milking Cluster separately. Of Vacuum Tubing. Bucket, D/L-style Milking Lid, Vacuum Pulsator (50:50 ratio), Adapter and 8 ft. Fully-approved high polish stainless steel Bucket has hand grip and reinforced bottom.

NOTE: Buckets are NOT INCLUDED with Base Units. The PortaMilker is compact, easily maneuvered and easily transported. The Coburn PortaMilker gives every dairyman the opportunity to use a highly efficient milking machine.

Bucket capacity is 50 lbs. Replacement Long and Short Replacement Handles sold separately. Top OD is 7 3/4" (195cm). Handle dimension from top of bucket to bottom of long handle is 5-3/4", and bucket weighs 11 lbs.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 7/16" ID, 3/16" Wall, 28 lbs.

80lb SS Bucket Assembly f/ two cows

Lid Gasket (6-3/4 " x 7-7/8 " x 5/16 ") for Universal Inside Flange 122 Milker.

This assembly includes a 7 ft. Piece of Vacuum Tubing and a 5 ft. The ITP205 Assembly for sheep includes two claws, 0/301 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milkingassembly.