Portable Bucket Milking Machines Milking Equipment For Sale In Colorado Springs

Coburn Milking Buckets are made out of fully approved, high polish stainless steel. Includes an additional handle at the bottom rim for ease of carrying and pouring. 65# (30 liters) with a shorter handle for D/L style lids.

Replacement Stainless Steel Milking Handle for MP120X or MP140X only. Order side plate MPXHP separately.

Fresh Cow Lid for bucket milker is made of impact resistant fully-approved transparent polycarbonate plastic. Gasket included. Lid has three 5/8" diameter nipples and will fit any Coburn poly or stainless steel bucket.

Eco-Bucket has a stainless steel D/L-style (short) locking handle, snap-on handle attachment (fits either side of bucket) and molded-in permanent scale marked in lbs. Handle dimension from top of bucket to bottom of handle is 5-3/4" (145cm).

Stainless Steel knurled nut for 4008043 and 4008097 lids.

Eco-Bucket has a stainless steel locking handle (long-style), snap-on handle attachment (fits either side of bucket) and molded-in permanent scale marked in lbs. Handle dimension from top of bucket to bottom of handle is 5-3/4" (145cm).

80lb SS Bucket Assembly f/ two cows

Replacement Long Handle for 2609021 Deluxe Stainless Steel Milking Bucket.

Piece of Vacuum Tubing and a 5 ft. The ITP205 Assembly for sheep includes two claws, 0/30 liners and shells as well as splitters, bracket and other tubing for a ready-made goat milking assembly.

The Coburn Clear Poly Fresh Cow Lid with gasket fits all Coburn buckets as well as 10 gallon cans. Fits buckets with top ID from 6-3/4" to 8". Includes lid gasket. Has two 5/8" nipples.

Order Milking Cluster separately. Extra high density semi-transparent seamless poly milk bucket has rounded shoulders and strong reinforced bottom. Poly Bucket, Storage Lid, D/L-style Milking Lid, Vacuum Pulsator (50:50 ratio), Adapter and 8 ft.

Coburn Milking Buckets are made out of fully approved, high polish stainless steel. Includes an additional handle at the bottom rim for ease of carrying and pouring. 65# (30 liters) with a long handle .

This milking lid is designed to fit all standard milker buckets, including Coburn stainless steel and poly milking buckets. Nipples are 5/8" ID and the ID of the lid rim is 7-7/8".

1 set of 4 of 25003 inflations 1 set of 4 of 25150 air tubes 1 of 25143 1 of 25145 1 of 25195 1 of 25140 Replacement rubber for the Kleen Flo Pail Milker Unit. Includes 2, 4, 12, 11, 20A, 23A.

Order Bucket & Lid Assembly separately. **IF milking 2 animals please order 2 milking clusters. Of 5/8" ID Clear Milker Tubing and 3 ft. Of ¼" ID Black Vacuum Tubing. Milking Cluster includes Interpuls Orbiter Stainless Steel Milking Claw, Rubber Inflations,...

ID of the lid is 7-/8". Gasket is included. This milking lid is designed to fit Westfalia-style buckets. Nipple is 5/8" ID. Lid fits buckets which measure 5.7" (145mm) between top of bucket and bottom of handle.

The unit is compact, easily maneuvered and easily transported. The PortaMilker II base unit includes these components: Lubricated Conde Vacuum Pump Steel Vacuum Tank Spring Loaded Vacuum Regulator Vacuum Cock Vacuum Gauge Large, Non-corrosive, 10" Hard...

Piece of Vacuum Tubing and a 5 ft. The ITP205 Assembly for sheep includes two claws, 0/301 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milkingassembly.

Gasket is included. Lid fits buckets which measure 4.7" (120mm) between top of bucket and bottom of handle. This milking lid fits Coburn buckets as well as the most popular brands and is adaptable for use with Interpuls Pulsators.

Order Milking Cluster separately. Fully-approved high polish stainless steel Bucket has hand grip and reinforced bottom. Bucket, D/L-style Milking Lid, Vacuum Pulsator (60:40 ratio), Adapter and 8 ft.

Order Milking Cluster separately. Extra high density semi-transparent seamless poly milk bucket has rounded shoulders and strong reinforced bottom. Poly Bucket, Storage Lid, D/L-style Milking Lid with two nipples, Vacuum Pulsator (50:50 ratio), Adapter...

Includes an additional handle at the bottom rim for ease of carrying and pouring. Coburn Milking Buckets are made out of fully approved, high polish stainless steel. Rim diameter is 7-1/16” ID by 7-3/4” OD.

The PortaMilker is compact, easily maneuvered and easily transported. Unit has 2 wheels and will accept 2 bucket milkers. Order Buckets and Milking Clusters separately from the number of options available.

Surcingle Rod for Suspended Milkers weighs approximately 1 lb.

Plastic Knurled Nut for 4008082 Lid.

The Coburn Poly Fresh Cow Lid features unbreakable stainless steel nipples in 5/8" size. Includes lid gasket. Lid fits all Coburn buckets, 10 gallon cans or any bucket with top ID from 6-3/4" to 8".

Complete claw assembly that is included with the NuPulse Mini Milker. If you would just like the Original Standard Claw only, click here. Includes set of inflations , shells, short air tubes, claw, hose and squeeze clamp.