Portable Bucket Milking Machines Milking Equipment For Sale In Bakersfield

Plated Handle Set w/Screws f/ Poly Bucket

The vacuum tank has a clear plexi lid for easy viewing into the tank. This unit is a 3/4 HP Mini Pump Assembly consisting of a heavy duty electric motor and oil-less vacuum pump, mounted on a stainless steel moisture trap and vacuum reserve tank.

Stainless Steel knurled nut for 4008043 and 4008097 lids.

Replacement Handle Side Plate for MP120X or MP140X, sold individually (2 required per bucket).

Plastic Knurled Nut for 4008082 Lid.

Handle dimension from top of bucket to bottom of handle is 4-3/4" (120cm). Eco-Bucket has a stainless steel D/L-style (short) locking handle, snap-on handle attachment (fits either side of bucket) and molded-in permanent scale marked in lbs.

Replacement Short Handle for 2609022 Deluxe Stainless Steel Milking Bucket.

Gasket included. Fresh Cow Lid for bucket milker is made of impact resistant fully-approved transparent polycarbonate plastic. Lid has three 3/4" diameter nipples and will fit any Coburn poly or stainless steel bucket.

The PortaMilker II base unit includes these components: Lubricated Conde Vacuum Pump Steel Vacuum Tank Spring Loaded Vacuum Regulator Vacuum Cock Vacuum Gauge Large, Non-corrosive, 10" Hard Rubber Tires Twin Caster-like Wheels 1HP CSA-Approved Electric...

Fully-approved high polish stainless steel Bucket has hand grip and reinforced bottom. Included in the assembly are 80 lb. Bucket, D/L-style Milking Lid, Vacuum Pulsator (60:40 ratio), Adapter and 8 ft.

Gasket included. Libero also features a built-in adapter for Interpuls vacuum pulsator and a handy hook for the claw. Libero Clear Milking Lid was designed to enable the locking and unlocking of the lid without removing the hoses.

Check Valve for 140414A.

Unit has 2 wheels and will accept 2 bucket milkers. NOTE: Buckets are NOT INCLUDED with Base Units. Order Buckets and Milking Clusters separately from the number of options available.

This extra high-density, translucent, seamless polyethylene milk bucket has been improved with new rounded shoulders and a reinforced bottom. 6-15/16" ID, 7-21/32" OD bucket rim is compatible with many commonly available milking lids and seals tightly...

Lid fits buckets which measure 4.7" (120mm) between top of bucket and bottom of handle. Gasket is included. Inside dimension of rim is 7-7/8" ID. This DeLaval-style milking lid is designed for use with the HP100 pulsator.

It has 2 wheels and takes one bucket milker. The Coburn PortaMilker gives every dairyman the opportunity to use a highly efficient milking machine. The PortaMilker is compact, easily maneuvered and easily transported.

Product code :3005323 Unit is set-up for two bucket milkers and has 2 wheels. The PortaMilker is compact, easily maneuvered and easily transported. The Coburn PortaMilker gives every dairyman the opportunity to use a highly efficient milking machine.

The Coburn Clear Poly Fresh Cow Lid with gasket fits all Coburn buckets as well as 10 gallon cans. Has two 5/8" nipples. Fits buckets with top ID from 6-3/4" to 8". Includes lid gasket.

It takes 9/32" hose for both twin and air. The D#95 pulsator is interchangeable with parts for the LL90 pulsator . It is vented with valves and side to side pulsation. The bucket comes complete with your choice of stainless steel bucket, D#95 pulsator...

Check Ball Cage for Bucket Milker Lids

Coburn Milking Buckets are made out of fully approved, high polish stainless steel. Rim diameter is 7-1/16” ID by 7-3/4” OD. Includes an additional handle at the bottom rim for ease of carrying and pouring.

Includes lid gasket. The Coburn Poly Fresh Cow Lid features unbreakable stainless steel nipples in 5/8" size. Lid fits all Coburn buckets, 10 gallon cans or any bucket with top ID from 6-3/4" to 8".

Fully-approved high polish stainless steel Bucket has hand grip and reinforced bottom. Included in the assembly are 65 lb. Bucket, D/L-style Milking Lid, Vacuum Pulsator (60:40 ratio), Adapter and 8 ft.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 7/16" ID, 3/16" Wall, 28 lbs.

Extra high density semi-transparent seamless poly milk bucket has rounded shoulders and strong reinforced bottom. Included in the assembly are 40 lb. Poly Bucket, Storage Lid, D/L-style Milking Lid, Vacuum Pulsator (60:40 ratio), Adapter and 8 ft.

This milking lid fits Coburn buckets as well as the most popular brands and is adaptable for use with Interpuls Pulsators. Gasket is included. Lid fits buckets which measure 4.7" (120mm) between top of bucket and bottom of handle.

This milking lid is designed to fit all standard milker buckets, including Coburn stainless steel and poly milking buckets. The two-nipple design features exceptional workmanship and fine polished stainless steel construction.