Portable Bucket Milking Machines Farm Supplies For Sale In Oklahoma

Replacement Stainless Steel Milking Handle for MP120X or MP140X only. Order side plate MPXHP separately.

Gasket included. Fresh Cow Lid for bucket milker is made of impact resistant fully-approved transparent polycarbonate plastic. Lid has three 3/4" diameter nipples and will fit any Coburn poly or stainless steel bucket.

Lid Gasket (6-3/4 " x 7-7/8 " x 5/16 ") for Universal Inside Flange 122 Milker.

Lid Gasket (6-1/4 " x 9 " x 1-3/8 ") for Polycarbonate fresh cow lid 140425, 140435, 140427, 4008096 and QuarterMilker lid 100QMLG , .

Orbiter Cow Milking Assembly f/EcoMilker. For use with 3005033 and 3005035 EcoMilkers.

65# (30 liters) with a shorter handle for D/L style lids. Coburn Milking Buckets are made out of fully approved, high polish stainless steel. Includes an additional handle at the bottom rim for ease of carrying and pouring.

Rim diameter is 7-1/16” ID by 7-3/4” OD. Coburn Milking Buckets are made out of fully approved, high polish stainless steel. 80# (34 liters) with Long handle Wt. 14 lbs. Includes an additional handle at the bottom rim for ease of carrying and pouring.

Stainless Steel knurled nut for 4008043 and 4008097 lids.

If you would just like the Original Standard Claw only, click here. Complete claw assembly that is included with the NuPulse Mini Milker. Includes set of inflations , shells, short air tubes, claw, hose and squeeze clamp.

Lid Gasket (6-1/4 " x 7-31/32 " x 1/4 " ) for Delaval New Style 06409 Milker, and Coburn lids 312, 4008043, 4008073, 4008118 & 4008097.

The 14300 claw is 300cc with a Radel plastic bowl. It is set up ready to connect to any portable or bucket milker or to your vacuum and milk line. It takes 9/32" hose for both twin and air.

65# (30 liters) with a long handle . Coburn Milking Buckets are made out of fully approved, high polish stainless steel. Includes an additional handle at the bottom rim for ease of carrying and pouring.

Check Ball Cage for Bucket Milker Lids

Check Valve for 140414A.

Lid fits buckets which measure 4.7" (120mm) between top of bucket and bottom of handle. This milking lid fits Coburn buckets as well as the most popular brands and is adaptable for use with Interpuls Pulsators.

Libero also features a built-in adapter for Interpuls vacuum pulsator and a handy hook for the claw. Libero Clear Milking Lid was designed to enable the locking and unlocking of the lid without removing the hoses.

Top OK is 7-3/4" (195cm). It features smooth seamless molded interior and a raised reinforcement ring at the bottom for strength and ease of gripping. Eco-Bucket has a stainless steel D/L-style (short) locking handle, snap-on handle attachment (fits either...

Stainless trap lid with 90's, 58" with checkball for short handle on bucket.

Of Vacuum Tubing. Extra high density semi-transparent seamless poly milk bucket has rounded shoulders and strong reinforced bottom. Order Milking Cluster separately. Poly Bucket, Storage Lid, D/L-style Milking Lid, Vacuum Pulsator (60:40 ratio), Adapter...

Gasket included. Fresh Cow Lid for bucket milker is made of impact resistant fully-approved transparent polycarbonate plastic. Lid has two 5/8" diameter nipples and will fit any Coburn poly or stainless steel bucket.

This highly polished Stainless Steel Milking Bucket features a special bottom design which gives extra stability and convenience. Bucket capacity is 50 lbs. Bucket is highly polished inside and out with an extra thickness of stainless steel at the bottom,...

Rim diameter is 7-1/16” ID by 7-3/4” OD. Coburn Milking Buckets are made out of fully approved, high polish stainless steel. 80# (34 liters) with Shorter handle for D/L style lidsWt. 14 lbs.

Plastic Knurled Nut for 4008082 Lid.

Replacement Handle Side Plate for MP120X or MP140X, sold individually (2 required per bucket).

This milking lid is designed to fit Coburn poly buckets, 140411 and 140408. Lid fits buckets which measure 5.7" ( 145mm ) between top of bucket and bottom of handle. ID of the lid is 7-7/8".

Gasket included. Fresh Cow Lid for bucket milker is made of impact resistant fully-approved transparent polycarbonate plastic. Lid has three 5/8" diameter nipples and will fit any Coburn poly or stainless steel bucket.