Poly Irrigation Tubing

• ✓ 500 ft. in length
• ✓ Made from durable materials for long life in the landscape

• Inner Diameter (in.): 0.25
• Assembled Depth (in.): 5.5 in
• Manufacturer Warranty: 3 Year Warranty
• Tubing Length (ft.): 500

8 in

• ✓ 100 ft. coil
• ✓ 25 to 30 psi recommended operating pressure

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Returnable: 90-Day
• Assembled Width (in.): 8 in
• Assembled Depth (in.): 8 in

20.3 in

• ✓ Use with emitter tubing and spot watering emitters
• ✓ Pressure rating of 70 psi
• ✓ Flexible for easy installation

• Irrigation System Component: Tubing
• Assembled Depth (in.): 20.3 in
• Assembled Width (in.): 20.3 in

• ✓ Resistant to cracking, heat, UV rays and chemicals
• ✓ Produced using dows 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

• Assembled Width (in.): 21 in
• Pressure Rating: 80
• Outer Diameter (in.): .50
• Returnable: 90-Day

• ✓ For outdoor use only
• ✓ For cold water use only

• Assembled Depth (in.): 3.0 in
• Inner Diameter (in.): 0.25
• Tubing Length (ft.): 50
• Manufacturer Warranty: None

.125

• ✓ Flexible design allows for ease of use
• ✓ Maximum recommended operating pressure: 35 psi

• Inner Diameter (in.): .125
• Color Family: Blacks
• Tubing Length (ft.): 50
• Outer Diameter (in.): .125

• ✓ Low density polyethylene construction
• ✓ Use as the basis for a complete patio system

• Color Family: Blacks
• Pressure Rating: 60 psi
• Outer Diameter (in.): 0.25
• Manufacturer Warranty: 3 years

• ✓ Saves water by delivering water right where it is needed most, at the plant root zone
• ✓ Made from high quality, UV resistant materials

• Returnable: 90-Day
• Inner Diameter (in.): 0.25
• Drip Line/Tubing Type: Porous Tubing
• Assembled Width (in.): .7 in

• ✓ 100 ft. L
• ✓ Saves water by delivering water right where it is needed most, at the plant root zone

9 in

• Assembled Depth (in.): 9 in
• Assembled Height (in.): 3 in
• Inner Diameter (in.): .25
• Assembled Width (in.): 9 in

• Manufacturer Warranty: 3 years
• Irrigation System Component: Tubing
• Assembled Width (in.): 5.5 in
• Inner Diameter (in.): 0.25
• Returnable: 90-Day
• Flexible design allows for easy of use: Yes

• ✓ Flexible tubing with UV-resistance
• ✓ Works with most new or existing drip systems.
• ✓ Distributes water to emitters in drip irrigation systems

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): 0.5
• Assembled Depth (in.): 3.000 in

• ✓ 1/2 gallon per hour (GPH) emitters every 6 in. are factory-installed for uniform water distribution
• ✓ Factory-installed emitters cut installation time

• Returnable: 90-Day
• Manufacturer Warranty: 1 year
• Assembled Width (in.): 10.5 in
• Pressure Rating: 167 psi max

• ✓ Used in conjunction with 1/4 in. drippers
• ✓ Simple to install Used with 1/4 inch micro tubing and 1/2 inch drip tubing using 1/4 inch barbs fittings
• ✓ 50 foot roll

7.5 in

• Assembled Height (in.): 2.25 in
• Assembled Depth (in.): 7.5 in
• Assembled Width (in.): 7.5 in

• ✓ 50 foot coil
• ✓ 1/2 in x 50 ft. coil w/ built in pressure compensating emitters
• ✓ Waters uniformly throughout the planting area, improving plant health and growth

• Assembled Depth (in.): 2.5 in
• Inner Diameter (in.): .54
• Assembled Width (in.): 20.40 in

• ✓ Use for groundcover, roses, shrubs, plantings in narrow areas or loops around trees.
• ✓ Maximum run length of 202 ft. can be achieved from a single water source at 45 psi
• ✓ Flexible tubing for easy installation; no special tools or glue are needed

• Inner Diameter (in.): 0.50
• Manufacturer Warranty: 3 years
• Color Family: Blacks

• ✓ Dimensions: 100 ft. with .600 ID x .700 OD
• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Can be installed above or below ground
• ✓ Designed to meet the demand of any drip irrigation projects from professional landscape to residential gardening installations, for above or below the ground

• Inner Diameter (in.): .50
• Color Family: Blacks

0.25

• Color Family: Blacks
• Outer Diameter (in.): 0.25
• Returnable: 90-Day
• Inner Diameter (in.): 0.25
• 50 ft. drip soaker ideal for watering planters and small plants in rows and borders: Yes
• Assembled Height (in.): 6 in

• ✓ Works with most new or existing drip systems
• ✓ Easy to install

• Pressure Rating: 120 psi
• Tubing Length (ft.): 500
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Irrigation System Component: Tubing

• ✓ Flow-regulated, self-flushing in-line emitters deliver equal flow at a wide range of operating pressures and over a long length of drip line
• ✓ Saves money by significantly lowering the cost of system components compared to conventional irrigation systems
• ✓ Maximum recommended length of run from a single water source at 25 PSI is 202 ft.

• Inner Diameter (in.): 0.50
• Outer Diameter (in.): .50
• Color Family: Blacks

• ✓ Factory-installed emitters cut installation time
• ✓ 1-gallon per hour emitters installed every 18 in.
• ✓ Pressure-compensating emitters ensure even watering and save water
• ✓ Use with other professional quality Toro blue stripe products

• Color Family: Blacks
• Assembled Depth (in.): 24 in

• ✓ Ideal for watering flowerbeds, closely planted areas, potted plants, and vegetable gardens
• ✓ Durable construction provides many years of reliable use
• ✓ A single 1/4 in. soaker line should not exceed 15 ft.

• Drip Line/Tubing Type: Porous Tubing
• Irrigation System Component: Tubing
• Assembled Width (in.): 7.000 in

• ✓ For drip irrigation applications
• ✓ For outdoor use only
• ✓ UV-resistant

• Irrigation System Component: Tubing
• Inner Diameter (in.): 0.25
• Tubing Length (ft.): 50

• ✓ Compatible with most brands of 1/4 in. Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays
• ✓ 1/4 in. x 250 ft. Tubing is for use with spot watering emitters
• ✓ Total Satisfaction Policy
• ✓ Connect with Rain Bird 1/4 in. barbed fittings and stakes

• Inner Diameter (in.): .165
• Pressure Rating: 70 psi

• Contains UV inhibitors for long life and extended operation in harsh conditions: Yes
• Assembled Depth (in.): 13.5 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Pressure Rating: 25
• Assembled Width (in.): 14.5 in
• Color Family: Blacks

• ✓ Dimensions = .250 OD x .170 ID
• ✓ Conforms to strict ASAE standards for minimum inside diameter and wall thickness
• ✓ Designed for use with other Toro Blue Stripe Drip products

• Tubing Length (ft.): 100
• Pressure Rating: 161 psi
• Color Family: Blacks

• ✓ 1 to 60 psi pressure rating
• ✓ Conforms to A.S.A.E. standards for minimum inside diameter and wall thickness
• ✓ 3-layer Matrix technology for improved strength and flexibility

• Outer Diameter (in.): .71
• Manufacturer Warranty: 1 year
• Inner Diameter (in.): .62

• ✓ Product length is 100 ft.
• ✓ No special tools or glues necessary for installation
• ✓ Filter requirement: minimum of 150 mesh

• Assembled Height (in.): 3 in
• Manufacturer Warranty: 3 year warranty
• Returnable: 90-Day