These poles meet OSHA requirements for electrical conductivity tested at 100,000 volts per foot for five minutes. These high-visibility yellow poles are 2-1/2 times stronger than wood.
Handy for when you need a little extra reach! The extra-long 30-inch handle helps when pruning thorny ornamentals or getting to hard-to-reach areas. Heavy gauge steel saw has sharp tri-edge teeth.
30" handle is good for thorny ornamentals or hard to reach areas: Product Features
13" cutting edge with tri-edge teeth: Specs
Uses the same replacement blade as our Fanno PS13, which is our blade # PSTB: Product Benefits
Kit includes PH4 pruner head, fiberglass poles (two 6' sections), 20PS pole saw blade and socket, and pruner rope. For your convenience, we've put together some of our most popular pruner heads in special combination kits.
Specs
20PS saw has cast aluminum 16 in. curved saw blade, utility hook, and paint brush holder: Specs
PH4 has cutting capacity 1 1/4in.: Specs
Weight 2lbs.: Specs
6ft. x 1 1/4in. fiberglass poles have ferrules on both ends, safety yellow, and resistant to electricity: Specs
1/4 in. Pro-Milla rope is waterproof, weather resitant, and 20ft. long: Specs
We then chrome-plated the cutting blade for long-lasting sharpness and durability. Finally, we added a sap groove to the bypass pruner to keep the cutting blade clear of excess buildup.
Product Features
Sap groove: Product Features
Two-pulley system: Product Features
One of the few pruner heads around that comes with rope already attached: Product Features
Aluminum socket - with washer, bolt and nut only. Mounts directly to 602T top pole or use A16W, ST14 or ST16 adapter to mount to 603A wood pole, or any of our fiberglass poles.
Product Benefits
Specs
NOTE: The 20S used to taper on the inside, so it used to take the tapered adaptors such as A13W and ST11. This is no longer the case as it is now the same diameter inside from top to bottom. Use the A16W, ST14 or ST16 adaptors to mount it to a fiberglass pole or the 604A wood pole: Specs
Lightweight but very strong cast aluminum: Product Benefits
Includes blade mounting pin, blade mounting bolt and wing-nut, and bolt/nut for hole in wood adaptor (wood adaptor not included): Product Features
Wing-nut on mounting bolt for ease of changing the angle of the blade, if the blade has adjusting holes (like our Product Number 20B): Product Benefits
Traditional Marvin design, tried and true for years, now upsized to tackle bigger cuts. The Marvin "Bull" pruner is Marvin's newest pole pruner. This particular combo includes the PH5 head, two yellow fiberglass poles, a saw blade and saw holder.
Specs
Cutting capacity of PH5 is 1 & 3/4": Specs
Ordering the combo is a time-saver when you consider the adaptors (necessary to put the pruner head and saw holder on the poles) and rope for the pruner head is already installed: Product Features
Kit includes the Marvin PH5 "Bull" pruner, two yellow fiberglass poles, the saw blade, saw blade holder, and pre-mounted adaptors and rope for the pruner head: Specs
Professional-grade aluminum telescopic pole saw is the perfect tool when looking for a lightweight, fast cutting saw. The telescopic pole is oval shaped to provide great directional control of the blade while minimizing flexing during use.
Product Features
Telescopes: 5.5' to 9'
Ship Wt: 3.5 lbs
Rubberized grip on bottom of pole: Product Features
Aluminum pole: Specs
The precision-ground, razor-sharp teeth with four cutting angles provide fast, clean and extremely smooth cutting action: Product Features
The ZF163 and ZF165 series feature a cut and hold pruner, perfect for those high jobs where you do not want the material to drop. The handle stop screw now has a blind nut to secure it.
Product Features
Specs
Drop-forged blades give you greater cutting leverage even under tough conditions: Product Features
Die-cast aluminum grip is coated for non-slip use: Product Features
1/2-inch cutting capacity: Specs
Weight: 4 pounds: Specs
Single operation lever simplifies length adjustment, while maintaining superior cutting power: Product Features
We then chrome-plated the cutting blade for long-lasting sharpness and durability. Finally, we added a sap groove to the bypass pruner to keep the cutting blade clear of excess buildup.
Recessed hook edge pulls smoothly. Stiffer spring for smooth action, longer life and no sticking. 1.25-inch cutting capacity. Jameson's popular pole pruner features forged steel hook and arm components for strength.
Combos disassemble easily for storage and transport: Product Benefits
Consists of JA14 pruner with A16W adaptor, one 20S socket with A16W adaptor, one 20B blade, and two FP600 poles that snap together, each 6ft long for a total of 12ft, or just use one 6ft pole if you choose: Specs
The new Swing Head is made from strong die-cast aluminum with a hand adjustable bolt to lock the angle tightly in place (+/- 30 degrees tilt). The long handle design adjusts from 4 - 7 feet (ZF183) and 6-10 feet (ZF185).
Jameson's Big Mouth pruner utilizes a second adapter mounted pulley for added cutting power, up to 1 & 3/4". Stiff spring and recessed hook blade maintains a smooth cutting action.
Product Features
Specs
Includes rope, and adaptors already mounted in the pruner head and saw head; kit is ready to go when you get it: Product Features
Two 6' fiberglass poles; one base pole with rubber end cap, one add-on pole with male/female ends: Specs
This kit includes 750P Leonard Pole Pruner Head with rope and adapter installed (1) 20B Gilmour Saw Blade (1) 20S socket with adapter installed (to mount saw blade) (1) JC6E 6-foot Fiberglass Poles - Yellow (2) We cover this product with a lifetime warranty.
Product Features
The socket for the saw blade has a utility hook: Product Features
Bypass pruner is equipped with a sap groove: Product Features
The saw blade has three adjustment holes: Product Features
Blade has hole near the tip for storage: Product Features
Pruner is equipped with two-pulley operation: Product Features
Teeth are made slightly wider than the rest of the saw: Product Features
Save on the cost of a new saw and just replace the blade! 15.375-inch curved cutting blade; 5.5 teeth per inch. Click HERE for our selection of Sily Hayauchi 15.375-inch saws.
Or purchase an adapter sleeve to fit the pole of your choice and a standard 1.25-in pruning head, like our ST740. Pruner Head: Arrangement A makes it possible to have a pull cutting system.The blade is located above the branches and takes advantage of...
We then chrome-plated the cutting blade for long-lasting sharpness and durability. Finally, we added a sap groove to the bypass pruner to keep the cutting blade clear of excess buildup.
Product Benefits
Orange color provides visibility, which helps keep you from leaving one behind at a job site: Product Benefits
2-1/2 times stronger than wood: Product Benefits
Pruner head comes mounted on wood adaptor, ready to use the moment it arrives. We include everything that you need.: Product Benefits
One of the few pruner heads around that comes with rope already attached: Product Benefits
Snap lock coupling for quick, secure mounting: Product Benefits
Resistant to electricity, but it is important to note it is not insulated against shock.: Product Benefits
Metal "V" shaped spring, allows the handle to return to the open position. Sold individually! Handle spring for ARS Long Reach Pruners. Fits the LRP4, LRP6, LRCH4, LRCH6, TR163, TR183, TR165, TR185, 180L21, LRS6.
This design provides you with greater control and bending strength. Their design allows you to quickly couple multiple poles. Due to their size, these poles must ship via motor freight delivery.
