Contact seller for estimate Well maintained 2004 Case 4391TA Hydraulic Power Unit ( 110 HP)designed to power a water pump head ( not included). 2004 Case 4391TA Hydraulic Power System designed for driving a water pump head.
Mullinax Irrigation Pump John Deere LP Gas Engine Serial# RG6076A515863 Model# 6706AFN30 Delivery available Mullinax Irrigation Pump John Deere LP Gas Engine Serial# RG6076A515863 Model# 6706AFN30 Hours 687 Pyro Alarm and Auto Shut Down Rockford PTO unit...
Gunite Slack adjusters maintain consistent shoe-to-drum clearance which will help maximize lining life. Combine this fact with Guniteys unique clearance sensing design and exclusive two-way adjustment and you have a slack adjuster that provides the most...
Our products include nozzle, elements & plunger, delivery valve, VE-pump and so on. We are one of the most leading manufacturers of diesel fuel injection parts in China. Our excellent quality has been performance in various kind of reputation brand-BOSCH,...
PUMPS MANUFACTURER Casings, impellers, motor brackets, we have centrifugal pumps, thrash pumps, parts, air actuated pumps, boosters, tanks ASME or not, heat exchangers, submersibles, pump accessory etc...
We later used the motor on a repair job and have the pump end only left. Berkeley b4epbm pump end only (was on a 40 hp motor), used 2 years. Pump was on a pivot and was undersized and after second season was replaced.
I currently have a 40 HP pump that is at the bottom of the field. The pump must pump up a hill of 110 feet. It must pump 600 gal/min and have 60 lbs of pressure at the top of the hill.
Will trade both for 25-30KW 110/220, 1-phase, 60 herz diesel home back-up generator with transfer switch. Onan,75KW, Allis-Chalm. Turbo-diesel, 1 & 3-phase,110/220/440Volts,60herz,946 hours,trailer-mounted.
Approx 12 years old. Union Mills, Indiana (northwest part of the state). (All scam emails ignored). Also for sale: 12\' holding bin, Lundell 8\' Snowblower. $3,000 or best offer. In good working condition and stored indoors.
Any reasonible offer will be accepted. There are 10 pumps. These BJ type pumps are in good condition and will be an excellent investment for someone in the irrigation or farming business.
$300.00 for all. 68A-G Gorman Rupp used parts. 68A-G PTO pump used parts. Parts are in pretty good condition but there are no gears with it. 8" suction head # 7296, inpeller # 7297, volute # 298B, gear box housing # 6412 and bottom base # 6409.
7-used Aqua manna pumps $6700 per pump or best offer 11-used Flap feeders $200 or best offer 1- bubble bead filter $1100 or best offer plastic netting 2'x18' $25 water maze $27,500 or best offer
Upgrade the pump in your current unit or renew a broken pressure washer with a replacement pump. Brass head is corrosion resistant brass to keep the unit lasting longer. Fits most gas pressure washers from 2500-PSI to 3100-PSI with Honda, Briggs and Stratton,...
It is designed with a gas engine flange and 7/8 in. Dual oversized radial ball bearings are installed for better wear and friction resistance and precision polished stainless steel pistons for extended seal life.
✓ Universal to fit most brands/models
✓ Pre-sealed with oil inside pump
Returnable: 90-Day
Manufacturer Warranty: 1 year limited warranty
Product Height (in.): 9
Brand Compatibility: Universal to most gas pressure washers
It is designed with a gas engine flange and 7/8 in. Dual oversized radial ball bearings are installed for better wear and friction resistance and precision polished stainless steel pistons for extended seal life.
✓ Direct drive vertical axial pump, 7/8 in. shaft, thermal relief valve, SAE gas engine flange, threaded M22 pump outlet connection
✓ Precision polished stainless steel pistons for improved seal life, dual oversized radial ball bearings for better wear and friction resistance
Briggs & Stratton genuine parts are guaranteed to fit, built to lastand tested to comply with applicable (EPA) emission regulations. Maximize engine life with Briggs & Stratton genuine parts.
✓ No substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
✓ Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
If your fountain or water feature is near a windy, arid or sunny area or if you sometimes leave the fountain unattended for a few days, water levels can drop. Once water is added, the pump will turn itself back on.
✓ Adjustable Valve
✓ Compatible with 1/2 in. ID tubing
✓ This pump includes a 16 ft. power cord to allow for flexible installations.
Compact design allows for the pump to be placed in small areas and will operate in as little as 1/2 in. Easily adjustable flow control allows you to set the flow to achieve the desired effect.
Eco-Twist boasts new magnetic technology engineered to deliver continuous, reliable high-power performance and high flow rates for filtration systems, waterfalls and pond skimmers.
10 m cable: Yes
Manufacturer Warranty: 1 Year
Amperage (amps): 0.40
Product Width (in.): 5
Certifications and Listings: No Certifications or Listings
This submersible pump comes with a filter for easy installation. This pump has a maximum capacity of 1,875 gal. This waterfall pump has a maximum lift of 195-39/64 in. The Beckett 19/64 HP Submersible Waterfall Pump is an outdoor waterfall pump.
✓ Pumps 1800 GPH at 195-39/64 in. lift with adjustable valve helps you create an appealing waterfall
✓ Installation requires 1-1/2 in. diameter tubing (sold separately)
This heavy-duty corrosion resistant stainless steel submersible waterfall pump provides long life in rough environments. It can create streams, waterfalls or fountains in your garden pond.
Eco-Twist boasts new magnetic technology engineered to deliver continuous, reliable high-power performance and high flow rates for filtration systems, waterfalls and pond skimmers.
