Fits all 2in NPT water and trash pumps! 20 PVC suction hose with 2" couplings. Use with PWP2 - Pramac 2" Dewatering Pump. 25' Blue discharge hose with 2" couplings and strainer.
The Ranch Pro Gas Powered Driver is perfect for T-post and ground rod. Equipped with a 1-3/4 inch ID heavywall chuck the unit comes standard with a 1-inch adapter and locking clip.
Product Features
Specs
Has vibration dampener: Product Features
Use on T-posts, ground rods and stakes up to 1 & 5/8in wide: Product Features
Extend the life of your chainsaw! Echo Chainsaw Bar Oil protects against wear and reduces heat buildup. This blend maximizes lubricity and reduces heat caused from bar and chain friction.
The non-conductive fiberglass provides a degree of protection when working with buried electrical lines. Compatible with AirSpade 3000 components and accessories. An adjustable dirt shield protects the operator from flying debris.
Product Features
Specs
Lightweight, non-conductive, reinforced fiberglass tubing: Product Features
Dimensions (inches): 2 x 2 x 55: Specs
Male/female threaded connection: Product Features
Designed for the professional; easy to maintain and 30% easier starts! The CS-370-16 mid-range saw uses a 36.3 cc Power Boost Vortex engine to power a 16-inch bar. An air pre-cleaner spins out dirt to extend engine life.
Product Features
Specs
Adjustable automatic oiling system: Product Features
A large capacity gas tank, heavy duty air filtration system, diaphragm purge pump carburetor, and 265 maximum RPM round out this powerhouse. Whether you are digging for small trees, fence posts, poles or large posts, this powerful auger can handle it...
Husqvarna's model 430LS is ergonomically engineered and designed for comfort over long demanding strenuous shifts! High powered engines, optimally angled vibration-dampened handlebars ensure that you can work efficiently in all conditions.
Product Features
X-Torq engine: Product Features
95 decibels: Specs
Stand-alone starter cord is easy to access in case it needs changing: Product Features
Air purge to remove air from carburetor and fuel system for easy starting: Product Features
Helps maintain your AirSpade AirSpade assembled this valve kit with everything you need to replace the valve seals on your AirSpade 2000 Series or 4000 Series handle. This kit includes: (3) Valve seals (1) 0.25 Oz Parker O-Lube
Palm supports hand and provides leverage. Dual post chain break lever. Pro-grade Echo CS-303T-14 has a 30.1cc 2-stroke engine with 14-inch bar. Handle angle provides a natural wrist position while cutting.
Specs
Bar chain oil quart is item# BCOIL-Q: Specs
5.1 fl oz chain oil capacity: Specs
30.1 cc engine: Specs
14 in bar: Specs
Butterfly-valve diaphragm carburetor: Product Features
The spring-loaded handle allows for easy locking of the drum. This .68 horsepower electric motor comes assembled from the factory to lessen the assembly time of this mixer. Easy to transport AND easy to use! YARDMAX designed their heavy-duty, portable...
Product Features
Specs
IP45 washdown-certified electric motor and gearbox: Product Features
No fuel to spill, just charge and go! For true convenience with those larger jobs, have a spare battery so one battery can charge while you're working with the other! This interchangable GreenWorks G-MAX 40V Li-Ion 4.0 Ah Battery will fit any of the GreenWorks...
Get a new angle with your AirSpade! AirSpade designed this angle adapter for their 2000 Series units. Use this adapter to supersonic nozzle air-jet by 45 degrees. This makes it easier when working with deep excavations or potholes.
Product Features
Anodized aluminum construction: Product Features
Knurled surface provides superior grip for tight connection: Product Features
PTO speed is 540 rpm. Removable 1" standard screens included, other screen sizes available. Skidded frame provides maximum stability in operation position! Uses tractor power through PTO to chip 3 1/2" thick logs, green or dry, at 10 or more feet per...
In the horizontal, trimming position, the EDGIT shield design creates an upward draft, standing grass up, to provide an even cut. NOTE: for High Torque Gearbox Echo trimmers (these have a T in the model number) see EDG02
14" diameter disk: Specs
Your string is still doing all the work, the guide simply holds your string in place as you walk down the edge: Product Features
14" flywheel has chipping knife and 48 free-swinging hammers to make short work of the hardest jobs. Two-year engine warranty. Chips logs up to 4 1/2" in diameter, shreds branches 1 1/2" thick! 4.80 x 8.00 highway towable tires with trailer, stand and...
If so, pick up this kit! This kit provides all of the parts necessary to maintain and/or repair the Utility AirSpade 4000 Handle Assembly: (1) Spring and valve assembly (1) Pressure gauge (1) Safety clip (with lanyard) (1) O-ring lube Want a new handle...
This blower features a 25.4cc engine and improved rotational control. The rotational control feature reduces the gyro effect created by most handheld blowers. A new fan and volute design improves air filtration.
Product Benefits
Specs
Air velocity (MPH): 170: Specs
25.4cc engine outputs 27% more power than the PB-250LN and 21% more power than Stihl BG 50: Product Benefits
Transparent fuel tank: Product Features
Improved air filtration and excellent ergonomic features: Product Benefits
Blower force (N): 15.8: Specs
PB-2520AA weighs 0.9 pounds less than the PB-250LN: Product Benefits
Helps you reach difficult places without losing performance! This pole hedge trimmer has an adjustable cutting bar that provides greater versatility, better comfort, and makes work less tiring.
Powerful to go anywhere! Can bore 1/2-inch diameter holes in steel or concrete, up to 1-inch diameter in wood, up to 7-inch diameter in soil! Fast, lightweight and easy to use: the choice of professional landscapers, nurseries, deck and fence installers,...
An integral pressure gauge ensures you get the most optimal digging performance! This kit includes: (1) Utility AirSpade 4000 handle (1) 4-foot insulated fiberglass barrel with dirt shield (1) 105 CFM non-sparking nickel, aluminum, bronze blend supersonic...
Specs
Product Features
Weight (pounds): 10: Specs
Air output (CFM): Varies — see product page for details: Specs
Dimensions (inches): 60 x 14 x 2: Specs
Chicago-style swivel connector: Product Features
Inlet: 3/4-inch NPT: Specs
Rugged, ergonomic handle with plastic-coated grip: Product Features
Echo BRD280 cuts a crisp, beveled groove along the turf edge, leaving a professional, manicured finish! This new Bed Redefiner is one of their most revolutionary products to date. The claw is manufactured from high-grade steel with specially designed...
Specs
Product Features
Over-sized high-impact nylon shield with guide marker: Product Features
Blade Thickness - 2.5 inches: Specs
Dry Weight - 18 lbs: Specs
Rubber throttle control handle: Product Features
Engine Displacement - 28.1cc: Specs
Replaceable steel blade with carbide tips: Product Features
An ergonomically designed, three-position cutting head provides a safe, clear view of the work area. This motor features thermal overload protection. This saw offers the performance of a full-size masonry saw in a convenient portable size! Nortons Blockbuster...
Specs
Cut material up to 8 inches x 8 inches x 16 inches: Specs
Superior cutting performance! 8 cutting edges shear, rather than tear, increasing quality of cut. Not available for online ordering, please call 1-800-543-8955 weekdays 8AM - 5PM for fast shipment!
