100% made in the USA. 4 Sizes available. The inside liner is made from plasticized fabric that repels oil and water. Includes a tool pouch with a Velcro closure to keep files, wrenches and screwdrivers secure and close at hand.
Sizes available for 16 in, 18 in, 20 in, and 24 in long chain saw bars: Specs
Size: 16 1/2
Includes a built-in tool pouch with velcro flap: Product Features
Fuel capacity, 15.2 oz. Digital ignition system automatically adjusts engine timing. Designed for the professional tree care operator or the demanding farmer or rancher! The CS-450-18 features a powerful 45 cc Power Boost Engine with 18-inch bar.
Norton has designed this blade to work with high-speed hand held saws, walk behind saws, table, and chop saws. The laser welding of this blade increases the speed of the cut on a variety of materials without the need for changing blades.
This unit includes an anodized aluminum coupler. AirSpade makes these extensions with a high-pressure-rated, insulated inner air hose. These extensions provide extra reach capability for you to get to those hard-to-reach locations.
Product Features
Lightweight, reinforced non-conductive fiberglass tubing: Product Features
Length: 2 Feet
Knurled surface provides superior grip for tight connection: Product Features
Package dimensions (inches): Varies — see product page for details: Specs
Echo Chainsaw Bar Oil is a special blend of lubricants and detergents. It also minimizes resin build-up and facilitates chip and dust removal. Extend the life of your chainsaw! Echo Chainsaw Bar Oil protects against wear and reduces heat buildup.
A user-friendly, 3-point mounted handle absorbs vibration. You can fold up the wheels for easy transport. A Briggs & Stratton 208cc OHV engine delivers 5,500 blows per minute for 3,000 pounds of compaction force.
Specs
Product Features
Operation weight: 185 pounds: Specs
Travel speed: 50 feet per minute: Specs
RPM: 5,500 blows per minute: Specs
Self-propelled: Product Features
3-point folding absorption handle: Product Features
It measures 21 inches by 16-1/2 inches. Attachment requires no additional drilling or fabrication. Use this easy to attach pad for delicate jobs! YARDMAX designed this stamping pad for use with their Plate Compactor #YC1390 .
This replaces SRM311. This powerful brute performs in the toughest conditions! A 28.1cc engine, commercial grade filtration, low-tone muffler for quiet operation, shoulder harness, four-layer cable drive shaft and a large 27.1 ounce fuel tank for longer...
Specs
Heavy-duty gear case with sealed bearings: Product Features
They work well with many masonry building materials including: blocks, building bricks, pavers, and other medium-hard concrete materials. These cut to a depth of 5 inches. These blades combine value and performance! Norton Clipper engineers their ValuPlus...
With Low Vib, all these models are deigned to deliver low vibrations, making your operation comfortable as well as more ergonomic. Has a 21.7cc, .hp engine with 24-in knife length.
Six 6.4 oz blister pack. Features a fuel stabilizer that lasts up to 2 years! Echo Red Armour 2 cycle engine oil starts with removing carbon deposits and protects against future buildups.
The Multi-Pro versatile external chuck design can be configured with optional chuck and anvil for driving 1.2-4 lb channel post, tent stake chuck, concrete form pin chuck, or 1-3/4-in to 2-1/2-in square sign post and square post sign anchor with a drive...
Specs
Product Features
Weighs 44 lbs: Specs
Has vibration dampener: Product Features
4-stroke, 35.8 cc motor: Specs
Good for T-posts, ground rods, and stakes up to 2 & 3/8in diameter, and square stakes up to 2 & 1/2in diameter: Product Features
Heavy duty gear case and automatic oiler. Reach out and take out that branch! This Power Pruner attachment brings down branches 12 feet high and the 10-inch bar and chain cuts through sizable limbs.
25' Blue discharge hose with 2" couplings and strainer. Use with WP381, Powermate 1-inch Dewatering Pump Fits 1" NPT water pumps. 10' PVC Suction hose with 1" couplings.
Done! This kit gives you everything you need to dig the perfect hole every time. It also eliminates the chore of removing excess dirt with a trowel. This kit provides all of the hardware you need to get started.
Product Features
Specs
Bit 2 width (inches): 5: Specs
Creates the perfect size hole every time: Product Features
Patented curved-angle design pushes out of the hole and around the blade: Product Features
Extension material: Steel: Specs
Bit 1 hole diameter (inches): 4: Specs
Powder-coated steel drill bit auger: Product Features
Five-position rear handle. The 20" double -sided and dual reciprocating blade makes trimmer easier and more precise. Tanaka's Purefire two-stroke engine provides smooth and efficient power transfer from the engine to the cutting head resulting in faster...
Featuring a five position rotating rear handle for a variety of cutting positions. 30-inch double-sided blades combine increased productivity with precision-cutting action! The HC-185 is powered by a 21.2cc Power Boost Vortex engine.
For all chain sizes. A ruggedly-built, professional shop model that is built for years of service! Designed for optimum leverage for full and easy chain breaking, with smooth cam action; comes complete with punch and adjustable anvil.
These blades cut to a depth of 5 inches at a maximum of 5,460 RPM. You can quickly judge blade wear using the segment wear indicators built into each blade. Nortons 4X4 Max Cut Diamond Blades measure 14 inches in diameter and .125 inches in width.
Palm supports hand and provides leverage. Pro-grade 35.8 cc 2-stroke engine with 16-inch bar. Dual post chain break lever. The Echo CS-355T-16 has a contoured handle shape for better grip.
Specs
Product Features
Vibration reduction system: Product Features
35.8 cc 2 cycle engine: Specs
Bar chain oil quart is item# BCOIL-Q: Specs
Automatic/adjustable (clutch-driven) oiling system: Product Features
AirSpade constructs the 2000 Series with a lightweight yet rugged aluminum. Choose your desired nozzle flow below. This high-performance nozzle generates a laser-like jet that moves at twice the speed of sound.
Specs
Product Features
Weight (pounds): 38.0 to 39.5 — see product page for details: Specs
Heavy duty locking storage case: Product Features
Noise level (dB): 116 to 124 — see product page for details: Specs
3-foot extension and coupler: Product Features
45-degree angled adapter: Product Features
AirSpade 2000 handle with Chicago style connectors: Product Features
In the horizontal, trimming position, the EDGIT shield design creates an upward draft, standing grass up, to provide an even cut. 14" revolving disk replaces the trimmer shield and rolls down the edge placing and holding the trimmer string in the best...
Your string is still doing all the work, the guide simply holds your string in place as you walk down the edge: Product Features
