Orbit Sprinkler Valve System

• ✓ Dependable design
• ✓ Compatible with standard 24-Volt sprinkler systems
• ✓ Threaded easy-access jar-top lid design for easy serviceability
• ✓ Heavy-duty construction with stainless steel components provides years of reliable service

• Pressure Rating: 125
• Compatible Pipe Material: PVC

• ✓ Threaded bonnet jar-top system for fast and easy servicing
• ✓ Helps keep your drinking water safe
• ✓ 4-1/2 in. valve footprint

• Product Length (in.): 3.25 in
• Product Weight (lb.): 1.25 lb
• Irrigation System Component: Valve

• Package Quantity: 1
• Thread Type: Female
• Anti-siphon valve for the manual operation of irrigation sprinklers: Yes
• Operation: Manual
• Product Height (in.): 9
• Number of Outlets: 2

• ✓ 2, 3 and 4 zone cams included
• ✓ Great alternative to individual solenoid valves
• ✓ Above- or below-ground installation for flexible placement options
• ✓ Only use standard clear PVC cement (not included) for installation of the valve and allow 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and not the valve housing

• Connection: Slip-Joint
• Product Weight (lb.): 3lb

• ✓ For outdoor use only
• ✓ Installs easily at the lowest point of your sprinkler zone
• ✓ Opening pressure: 3 - 5 psi

• Irrigation System Component: Valve
• Outlet Size (in.): 2 1/8 - 2 1/4
• Manufacturer Warranty: none

• ✓ Corrosion-resistant internal parts
• ✓ Dual check valve backflow preventer consisting of two independently operated in-line spring-loaded check valves

• Outlet Size (in.): 2 or less
• Irrigation System Component: Valve
• Thread Type: Female Meter
• Product Width (in.): 5.5

• Connection: Male x Barb
• Operation: Automatic
• Product Height (in.): 7
• Product Width (in.): 7 in
• Irrigation System Component: Valve
• Inlet Size (in.): 1

• ✓ Bleed screw
• ✓ Automatic anti-siphon valve prevents contaminants from entering the household water supply

• Material: Brass
• Irrigation System Component: Valve
• Pressure Rating: 150 PSI
• Product Width (in.): 6. in

• ✓ Only use clear PVC cement (not included) and allow the valve 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in construction of the indexing valve, purple primer is similar and must be used only on the PVC pipes and not the valve housing
• ✓ Manual and automatic operation

• Thread Type: none
• Maximum Working Temperature (F): 130
• Product Height (in.): 6.25
• Material: Acrylonitrile Butadiene Styrene (ABS)

• ✓ For cold water use only
• ✓ Internal bleed lever is great for testing and flushing the sprinkler lines
• ✓ 1 in. inlet size

• Product Weight (lb.): 1.3 lb
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Operation: Automatic

• ✓ Double check valve assembly consisting of two independently operated spring-loaded center guided check valves
• ✓ Backflow preventer comes complete with 2 full port resilient seated ball valves for shut-off along with 4 resilient seated ball valve test cocks

• Outlet Size (in.): 2 or less
• Installation: Above Ground
• Product Height (in.): 9
• Pressure Rating: 175

• ✓ 5 year limited warranty
• ✓ Backed by a 5-year limited warranty

• Returnable: 90-Day
• Irrigation System Component: Valve
• Product Height (in.): 5.25
• Outlet Size (in.): 2 or less

• ✓ IAPMO approved
• ✓ Full stainless steel metering system

• Product Width (in.): 6.5 in
• Package Quantity: 1
• Operation: Automatic
• Material: Acrylonitrile Butadiene Styrene (ABS)

• ✓ Bleed screw for manual on/off operation and for testing and flushing of sprinkler system
• ✓ Precise flow control adjustment

• Product Height (in.): 7.25
• Product Width (in.): 3.75 in
• Valve Type: In-Line
• Connection: Male Pipe Thread

• ✓ 1 valve can replace up to (6) 1 1/4 in. solenoids
• ✓ Manual and automatic operation

• Product Length (in.): 6 in
• Product Height (in.): 6.25
• Maximum Pressure (psi): 80
• Material: Acrylonitrile Butadiene Styrene (ABS)

• ✓ Easy to winterize by removing pressure vessel between shutoff valves
• ✓ Protects polluted water from entering potable water supply
• ✓ Top access to test cocks and shutoff valves and check assembly makes the unit easy to test

• Product Length (in.): 3.75
• Inlet Size (in.): .75
• Maximum Pressure (psi): 175

• Installs easily into existing brass manual valves: Yes
• Connection: Female Pipe Thread
• Outlet Size (in.): 2 or less
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Package Quantity: 1
• Product Width (in.): 0.4

• ✓ Tilt diaphragm allows for a straight flow path of water, increasing the flow rate while reducing friction loss
• ✓ Self cleaning metering screen - screen is in turbulent flow of water for self-cleansing action during operation
• ✓ 1 in. male thread x 1 in. male thread
• ✓ Manual internal bleed through solenoid permits manual operation without discharging water outside the valve

• Returnable: 90-Day
• Pressure Rating: 20-150 PSI

• ✓ Energy efficient, low power encapsulated solenoid with captured plunger for long lasting dependability
• ✓ Designed for in-line (below ground) installation with approved back flow prevention device (not included)
• ✓ Buna-N diaphragm offers superior performance in harsh water environments
• ✓ Heavy duty construction with 1 in. fem threaded inlet and outlet

• Product Width (in.): 3.37 in
• Number of Outlets: 1

• ✓ Heavy Duty Construction with 1" female threaded inlet and outlet
• ✓ Long lasting durability with energy efficient, low power solenoid
• ✓ Buna-N diaphragm offers superior performance in harsh water environments

1

• Product Weight (lb.): 5.8 lb
• Package Quantity: 1
• Inlet Size (in.): 1

• ✓ 5 to 150 gpm output controls the amount of water pressure going to each zone
• ✓ 1 in. female thread electric valve
• ✓ Water flow indicator ensures proper installation every time

• Returnable: 90-Day
• Irrigation System Component: Valve
• Product Height (in.): 5.25 in

• Compatible Pipe Material: PVC
• Comes installed with an 8 zone and cam and an additional 7 zone cam: Yes
• Product Length (in.): 6
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Thread Type: none
• Outlet Size (in.): 2 or less

• ✓ IAPMO listed, ASSE listed 1013, CSA certified, NSF listed, AWWA compliant C511, and approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California
• ✓ Entire unit is serviceable in line, wye pattern design allows for short lay length that eases replacement labor costs

• Installation: Above Ground
• Product Height (in.): 6.25
• Material: Brass
• Pressure Rating: 175

• ✓ Valve may be installed vertically
• ✓ Valve may be installed horizontally

• Operation: Automatic
• Maximum Pressure (psi): 170
• Product Weight (lb.): 1 lb
• Inlet Size (in.): .5

• Pressure Rating: 175
• Operation: Automatic
• Installation: Above Ground
• Noryl replaceable seats and silicone rubber check discs: Yes
• Inlet Size (in.): 2
• Thread Type: FIP

• Package Quantity: 1
• Operation: Automatic
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Valve Type: In-Line
• Manufacturer Warranty: 1 Year
• Outlet Size (in.): 2 or less

• ✓ High-grade construction resists wear
• ✓ Captive bonnet bolts and solenoid plunger prevent loss of parts during servicing
• ✓ Trouble-free screw placement with simple debris removal
• ✓ Helps you adjust the flow of each zone on an irrigation system

• Product Length (in.): 2.5 in
• Outlet Size (in.): 2 or less