D1220 is a solar digital thermometer with fully sealed SUS case. Specifications: Case: 108mm (SUS304) Protection class: IP65 Temperature range: -50-125C/-58-257F Ambient Temperature: -20C-50C Update rate: 10seconds Power: Solar Accuracy: +/-1C@ -20-80C,other+/-...
Training problems will be identified and dissected, with you involved to facilitate making a deep meaningful connection with your horse so you can recognize needs and have the tools to bring out the best in them.
The SharkBite Connection System offers an extensive line of barb fittings plus manifolds, supports and tools for both clamp and crimp ring PEX tubing installations. The SharkBite PEX/Barb System includes everything needed, from pressure regulators and...
Product Length (in.): 1.125
Returnable: 90-Day
Low-cost plumbing connection system: Yes
Product Width (in.): 2.29 in
Type: Other
Manufacturer Warranty: For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242
Double sided plugs can plug holes from .16 to .235" in diameter. These handy goof plugs allow you to move around drip irrigation fittings and emitters by plugging the holes in the main line.
Punch creates a 1/8" hole. This handy, cost effective key punch is great for creating small pilot holes in header/mainline tubing to attach emitters and fittings.
Compatible with any of our Drip Irrigation Kits. If you want to reconfigure your irrigation system, or even if you just punched a hole in the wrong place, these goof plugs completely seal any hole in the header pipe.
The Power-Loctm connector tightens down on the header pipe making a clean, drip-less cap to your system. These Power-Loc elbows for 1 inch irrigation header pipes allow you more flexibility and the ability to add 90 degree angles in your irrigation design.
Tees allow you to split off from your main irrigation system's water line to water more than one area at a time. These Power-Loc Tees for 1 inch header pipes allow you more flexibility in your irrigation system design.
Tees allow you to split off from your main water line to water more than one area at a time. These Power-Loc Tees for 3/4 inch header pipes allow you more flexibility in your drip irrigation system design.
One end features a standard ¾ in. These adaptors allow you to easily connect to your irrigation main line tubing to hose ends, filters and other irrigation attachments. Female hose end and the other a Power-Loc connector that tightens down onto the mainline.
Simply cute the drip line in two, removing the damaged area, then attach each end to the coupling. Fix any damaged or leaky drip tape. Creates a tight seal and allows the drip tape to function as normal.
The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your system. These Power-Loc couplings for 1 inch header pipes are great for adding on to your current drip irrigation system or repairing a section of damaged tubing.
The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your system. These Power-Loc couplings for 1/2 inch header pipes are great for adding on to your current drip irrigation system or repairing a section of damaged...
The Power-Loctm connector tightens down on the header pipe making a clean, drip-less cap to your system. These Power-Loc elbows for 3/4 inch drip irrigation header pipes allow you more flexibility and the ability to add 90 degree angles in your irrigation...
The Power-Loc closure tightens down on the header pipe making a clean, drip-less cap to your irrigation system. These closures for 3/4 inch header pipes are a perfect way to cap off your drip irrigation watering system.
The Power-Loc closure tightens down on the irrigation header pipe making a clean, drip-less cap to your system. These drip irrigation closures for 1 inch header pipes are a perfect way to cap off your watering system.
Tees allow you to split off from your main water line to water more than one area at a time. These Power-Loc Tees for 1/2 inch header pipes allow you more flexibility in your irrigation system design.
Powder coated finish. Comes with mounting brackets, hardware and side rails. Drill two holes into your stand to attach the mounting brackets. Provides stability and safety, allowing one person to attend to animal.
Padded floor sold separately. The newly designed aluminum head piece assembly adjusts in height from 25" to 44" above the platform. Also includes an additional back plate so feet don't get hung up when lambs jump onto the stand.
The Power-Loctm connector tightens down on the header pipe making a clean, drip-less cap to your system. These Power-Loc elbows for 1/2 inch header pipes allow you more flexibility and the ability to add 90 degree angles in your drip irrigation design.
One end features a standard ¾ in. These irrigation adaptors allow you to easily connect to your main line tubing to hose ends, filters and other irrigation attachments. Female hose end and the other a Power-Loc connector that tightens down onto the mainline.
The metal cutting tool cleanly cuts a 1/8" hole. This handy T-Punch tool allows you to punch holes in you header pipe to attach drip emitters and other attachments. To make a larger ¼" hole press the knob on the handle into the 1/8" hole to expand it.
One end features a standard ¾ in. These watering system adaptors allow you to easily connect to your irrigations' main line tubing to hose ends, filters and other irrigation attachments.
The Power-Loc connector tightens down on the header pipe making a clean, drip-less cap to your system. These Power-Loc couplings for 3/4 inch header pipes are great for adding on to your current drip irrigation system or repairing a section of damaged...
