New Equipment Water For Sale In Kansas

Same desription as the J202 EXCEPT THIS UNIT HAS NO HEAT!

SPI foamed 4x4 energy free waterer door only.

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

SPI 351/352 (old style) Rubber Drain Plug only .

This Jug 4 Hole Waterer has a 45 gallon tank capacity & waterers 125 head of Dairy, 250 head of Beef & 300 head of Sheep. It's maximum 24-hr electical use is 1.56 kwh. Features: *Open bowl design *Draw Tube for natural drinking action *External Drain...

Peaked roof & raised ribs around the door openings prevents manure, feed & other contaminants from being washed into the bowl. The low profile design & fully hinged door provids animals better access to the capacity of the water & combination water gasket...

There are four base screws that hold the top base to the bottom base. These are not included when ordering a base only.

SPI 351/352 New Generation Gasket.

SPI hatch cover for model 4x4 energy free waterer.

SPI white corrugated baffle for model 4x4 energy free waterer.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

White polyethylene disc float only.

SPI 3.75" Brass Short Float Stem only.

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

Screw that holds the float connect to the top of the float.

SPI foamed door only. Specify model 354, 352 or 351 energy free waterer.

3/4" orfice only for the inside of a Franklin Valve.

Plastic screw that holds the float arm to the valve's lower arm at the top and the float connect at the bottom.

This black seat fits inside the plunger and shuts off the water through the orfice. Must be used with part #400267 Plunger Only.

SPI 90 degree elbow for all models.

SPI's energy free waterer is built using 100% polyethylene construction creating a strong corrosion free product to provide many years of trouble free operation. The peaked roof and raised ribs around the door openings prevent manure, feed and other contaminants...

This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights. Polyethylene Blue in color. With quick release access clips for the hatch cover and access doors, installation and work...

Plastic piece that sits on top of the float. It is held by a float screw and connects on to the bottom of the float arm.

SPI Drain Plug (#11) for all New Generation waterers.

80 Watt Immersible element used in the PC 1 waterer.

The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect the water line from freeze ups.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.