New Equipment Vacuum For Sale In United Kingdom

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes...

The Separate Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line...

Safety Valve for Stabilvac Seperate styles.

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Part number "348-17" on schematic diagram. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. For systems with CFM's over 250, two are recommended.

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

The Separate Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line...

Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

The Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line...

Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1100 and the CFM is 21. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many...

Depending on the model, the Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Operating on the servo principle (where a separate sensor, the servo pilot...

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

-Economical Grain Storage - Proven Performance - Built Heavy To Work Hard 10' Model Shown With Surge Hopper

The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Replacement foam filter sold separately. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

The Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line...

There is about 4 CFM needed per cow. At sea level at a temperature of 68F , with a 3HP motor, the RPM of this model is 900 and the CFM is 32. Weighs 121 Lbs. Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation...

Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Part number "353-06" on schematic diagram.

Part number "348-36" on schematic diagram.

Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17.