Available for excavators from 3-40 tonne. It has the capacity to handle light demolition tasks when dealing with structures made of wood or brick. The ROBI DG is a light demolition grapple designed for the most demanding of sorting and handling operations.
The FSI ST 27 HS stump cutter is delivered with a special plate that will fit easily onto the base machines own attachment plate. It is designed mostly for small front loaders but also for mini excavators.The horizontal sweeping function is performed...
The FSI ST 27 T stump cutter has a remarkable working ability with a cutter wheel extension of 300 mm and a sweeping arc which can reach up to 1750 mm. The FSI ST 27 T stump cutter has a hydraulic flow regulator which allows the speed control of the movements.
As a matter of course, we haven't let the grease nipple protection and powder coating go missing either! various sizes from 1200 mm 1900 mm 4-finger grippers for hackers made from Hardox 400 jagged models specifically for jerking compatible...
The FSI ST 27 Hstump cutter unit can rotate and be positionned in any of the 6 different notches in order to provide the best possible working conditions for the operator, without having to dismount it from the base machine .
The HKL-Ex may also be equipped with this in order to control the tilt and side extension (extra equipment) The frames for loaders with a telescopic arm work to the left for better view over the work area.
The FSI ST 65 T stump cutter has our largest cutter wheel with a diameter of 720 mm,this gives the machine an impressive working performance. Since stumps are dangerous for the traffic and a nuisance for flail mowers which clean the road sides it is a...
The HKL-Ex may also be equipped with this in order to control the tilt and side extension (extra equipment). The frames for loaders with a telescopic arm work to the left for better view over the work area.
For an easy mounting and to avoid any loss of power through the transmission , the cutter wheel of the fsi ST 20 H stump cutter is fitted directly on the hydraulic piston motor shaft,this allows to use the maximum available flow delivered by the base...
Objective in the development of the conical splitter : avoid the risk of accidents no manual work comfort (weather independent) lightweight high performance splitting maintenance-free expandable to include many machines, use with...
The FSI Stump Cutter ST 65 H is hydraulically driven by robust piston engines and power-Belt V-belts and is specially designed for mounting on excavators.The specially balanced Hardox milling disc (720 mm O) is provided with 28 triplex cutting teeth,...
For the hydraulic drive oil flow reqd is 80-130 ltr/Min. The large Hardox cutting wheel (570 mm diameter) with 20 triplex cutting teeth ensures a milling performance that meet professional standards.
The HKL-Ex may also be equipped with this in order to control the tilt and side extension (extra equipment). The frames for loaders with a telescopic arm work to the left for better view over the work area.
V-belt drive between the hydraulic piston motor and the cutter wheel. Easy adaptation for your machine - the stump cutter is delivered together with brackets to fit on a standard supporting plate.
Excavator size: 12 20 ton Oil flow (max 350 bar): 100-130 L/min, 135-160 L/min, 165-200 L/min 3 hoses (2*1) and quick couplers not included 3rd hose (½) always pressure free to tank Cutting disc w/teeth: o 720 mm No. of teeth (o size): 28 (28...
The cone splitter has the advantage over splitting pincers that neither the diameter nor the quality of the wood is important. There are approximately 30 various models with 1-12 drive motors according to the hydraulic power on the carrier machine.
Or single + return Oil flow: max 90 l/min (max 180 bar) Cutting disc w/teeth: 720 mm No. of teeth (o size): 28 (28.0 mm) 4 motions: above/below 600/500 mm all controlled: width 1400-2200 mm from length 650 mm tractor cab: lift/lowering guard Remote control:...
Its strong and functional design results in a long operational life that is effective in all operations. The ROBI CG is a multi functional crusher grapple designed for heavy demolition and recycling operations.
For an easy mounting and to avoid any loss of power through the transmission , the cutter wheel of the fsi ST 20 H stump cutter is fitted directly on the hydraulic piston motor shaft,this allows to use the maximum available flow delivered by the base...
When fitted with hydraulic lateral adjustment the unit can move 700mm of centre and gives great flexibility in work. The Stehr SBV range of Plate Compactors is a versatile tool able to cope with difficult ground conditions yet provide consistent results.
ROBI offers a full range for excavators from 10-45 tonne and wheel loaders from 6-19 tonne. With soil axles the MM is able to screen different kinds of material including top soil sand etc.
The HKL-Ex may also be equipped with this in order to control the tilt and side extension (extra equipment). The frames for loaders with a telescopic arm work to the left for better view over the work area.
